Rodex Fasteners CoROCO:5015 69 EBITDA Margin % is 14.14% as of Dec. 2025, which is 27% above its 10-year median of 11.15. GuruFocus rates ROCO:5015 with a GF Score™ of 69/100 and a GF Value™ of NT$30.16 (Modestly Undervalued). The stock has 8 warning signs investors should review. Among 3,033 Industrial Products companies, Rodex Fasteners Co ranks worse than 66.14% on this metric.
EBITDA Margin % is calculated as EBITDA divided by its Revenue. Rodex Fasteners Co's EBITDA for the
three
months ended in Dec. 2025 was NT$44 Mil. Rodex Fasteners Co's Revenue for the
three
months ended in Dec. 2025 was NT$313 Mil. Therefore, Rodex Fasteners Co's EBITDA margin for the quarter that ended in Dec. 2025 was 14.14%.
Rodex Fasteners Co (ROCO:5015) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Rodex Fasteners Co EBITDA Margin % Related Terms
Rodex Fasteners Co EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Rodex Fasteners Co's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ROCO:5015 vs SNA, RBC, LECO: EBITDA Margin % Comparison
For the Tools & Accessories subindustry, Rodex Fasteners Co's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Rodex Fasteners Co EBITDA Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Rodex Fasteners Co's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Rodex Fasteners Co's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Rodex Fasteners Co (ROCO:5015) has a EBITDA Margin % of 14.14% as of Dec. 2025. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Rodex Fasteners Co and its competitors. This is 27% above median its historical median of 11.15. Over the past decade, Rodex Fasteners Co's EBITDA Margin % has ranged from 5.36 to 27.27. According to the industry distribution chart, Rodex Fasteners Co ranks #2006 out of 3033 companies in the Industrial Products industry, placing it in the top 66.1%.
Is Rodex Fasteners Co's EBITDA Margin % too high?
Rodex Fasteners Co's current EBITDA Margin % of 14.14% is 27% above median its 10-year median of 11.15. Over the past 10 years, this metric has ranged from a low of 5.36 to a high of 27.27. The Industrial Products industry median EBITDA Margin % is 9.41. Rodex Fasteners Co's value of 14.14% is 50.3% above this industry median. Based on the distribution chart, Rodex Fasteners Co ranks #2006 out of 3033 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Rodex Fasteners Co has a GF Score™ of 69/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Rodex Fasteners Co's EBITDA Margin % compare to SNA and RBC?
According to the Industrial Products industry distribution chart, Rodex Fasteners Co ranks #2006 out of 3033 companies for EBITDA Margin %. This places Rodex Fasteners Co in the lower half of its industry. The industry median EBITDA Margin % is 9.41. Rodex Fasteners Co's value of 14.14% is 50.3% above this benchmark. Historically, Rodex Fasteners Co's own EBITDA Margin % has ranged from 5.36 to 27.27 over the past decade. While the company's 10-year median is 11.15 vs. the industry median of 9.41, Rodex Fasteners Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for an Industrial Products company?
The median EBITDA Margin % among Industrial Products companies is 9.41, based on 3,033 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Rodex Fasteners Co's current EBITDA Margin % of 14.14% is 50.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Rodex Fasteners Co and its competitors. For the Industrial Products industry, the median EBITDA Margin % is 9.41 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Rodex Fasteners Co's current EBITDA Margin % is 14.14%, which is 27% above median its own 10-year median of 11.15. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Rodex Fasteners Co stock overvalued right now?
Based on GuruFocus' analysis, Rodex Fasteners Co (ROCO:5015) is currently considered Modestly Undervalued. The stock's GF Value™ is NT$30.16, compared to a current price of NT$21.70 — trading 28.1% below its estimated fair value. The current EBITDA Margin % is 14.14%, which is 27% above median its 10-year median of 11.15 and 50.3% above the Industrial Products industry median of 9.41. Rodex Fasteners Co's overall GF Score™ is 69/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Rodex Fasteners Co (ROCO:5015), the current EBITDA Margin % is 14.14% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Rodex Fasteners Co (ROCO:5015) Overvalued in 2026?
Based on GuruFocus' analysis, Rodex Fasteners Co stock appears to be undervalued.
The current stock price of NT$21.70 is trading 28.1% below its estimated GF Value™ of NT$30.16.
GuruFocus considers Rodex Fasteners Co to be Modestly Undervalued.
Key valuation signals for ROCO:5015:
EBITDA Margin %: 14.14% (27% above median its 10-year median of 11.15)
GF Value™: NT$30.16 vs. price of NT$21.70 (28.1% below fair value)
Industry Position: 50.3% above the Industrial Products median (#2006 of 3033)
No single metric tells the full story. See the ROCO:5015 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Rodex Fasteners Co Ltd manufactures and markets stainless steel wire and precision-made screws. The company is engaged in processing, manufacturing, and trading of automotive/industrial screws, precision stainless steel special industrial screws, stainless steel wires, and precision hardware/machinery components. The products of the company include tapping screws, stainless steel wire, chipboard screws, machine screws, self-drilling screws, socket screws, special screws and others.
69GF Score
Get the complete analysis for ROCO:5015
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:5015 has been successfully added to your 
