Sunspring MetalTPE:2062 67 Current Ratio is 2.19 as of Dec. 2025, which is 44% above its 10-year median of 1.52. GuruFocus rates TPE:2062 with a GF Score™ of 67/100 and a GF Value™ of NT$20.93 (Fairly Valued). The stock has 5 warning signs investors should review. Among 1,785 Construction companies, Sunspring Metal ranks better than 72.72% on this metric.
The current ratio is a liquidity ratio that measures a company's ability to pay short-term obligations. It is calculated as a company's Total Current Assets divides by its Total Current Liabilities. Sunspring Metal's current ratio for the quarter that ended in Dec. 2025 was 2.19.
Sunspring Metal has a current ratio of 2.19. It generally indicates good short-term financial strength.
The historical rank and industry rank for Sunspring Metal's Current Ratio or its related term are showing as below:
TPE:2062'
s Current Ratio Range Over the Past 10 Years
Min: 1.06 Med: 1.52 Max: 2.53
Current: 2.19
During the past 13 years, Sunspring Metal's highest Current Ratio was 2.53. The lowest was 1.06. And the median was 1.52.
TPE:2062's Current Ratio is ranked better than 72.72% of 1785
companies
in the Construction industry
Industry Median: 1.58
vs TPE:2062: 2.19
Sunspring Metal (TPE:2062) Current Ratio Explanation
The current ratio can give a sense of the efficiency of a company's operating cycle or its ability to turn its product into cash. Companies that have trouble getting paid on their receivables or have long inventory turnover can run into liquidity problems because they are unable to alleviate their obligations. Because business operations differ in each industry, it is always more useful to compare companies within the same industry.
Acceptable current ratios vary from industry to industry and are generally between 1 and 3 for healthy businesses.
The higher the current ratio, the more capable the company is of paying its obligations. A ratio under 1 suggests that the company would be unable to pay off its obligations if they came due at that point. While this shows the company is not in good financial health, it does not necessarily mean that it will go bankrupt - as there are many ways to access financing - but it is definitely not a good sign.
If all other things were equal, a creditor, who is expecting to be paid in the next 12 months, would consider a high current ratio to be better than a low current ratio, because a high current ratio means that the company is more likely to meet its liabilities which fall due in the next 12 months.
Sunspring Metal Current Ratio Related Terms
Sunspring Metal Current Ratio Historical Data
* Premium members only.
The historical data trend for Sunspring Metal's Current Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TPE:2062 vs TT, JCI, CARR: Current Ratio Comparison
For the Building Products & Equipment subindustry, Sunspring Metal's Current Ratio, along with its competitors' market caps and Current Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Sunspring Metal Current Ratio vs Construction Industry
For the Construction industry and Industrials sector, Sunspring Metal's Current Ratio distribution charts can be found below:
* The bar in red indicates where Sunspring Metal's Current Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Sunspring Metal (TPE:2062) has a Current Ratio of 2.19 as of Dec. 2025. This is 44% above median its historical median of 1.52. Over the past decade, Sunspring Metal's Current Ratio has ranged from 1.06 to 2.53. According to the industry distribution chart, Sunspring Metal ranks #487 out of 1785 companies in the Construction industry, placing it in the top 27.3%.
Is Sunspring Metal's Current Ratio too high?
Sunspring Metal's current Current Ratio of 2.19 is 44% above median its 10-year median of 1.52. Over the past 10 years, this metric has ranged from a low of 1.06 to a high of 2.53. The Construction industry median Current Ratio is 1.58. Sunspring Metal's value of 2.19 is 38.6% above this industry median. Based on the distribution chart, Sunspring Metal ranks #487 out of 1785 companies in the Construction industry, which is above the industry midpoint. Overall, Sunspring Metal has a GF Score™ of 67/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Sunspring Metal's Current Ratio compare to TT and JCI?
According to the Construction industry distribution chart, Sunspring Metal ranks #487 out of 1785 companies for Current Ratio. This puts Sunspring Metal in the upper half of its industry. The industry median Current Ratio is 1.58. Sunspring Metal's value of 2.19 is 38.6% above this benchmark. Historically, Sunspring Metal's own Current Ratio has ranged from 1.06 to 2.53 over the past decade. While the company's 10-year median is 1.52 vs. the industry median of 1.58, Sunspring Metal has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Current Ratio for a Construction company?
The median Current Ratio among Construction companies is 1.58, based on 1,785 companies in the industry. Companies in the top quartile (top 25%) have a Current Ratio significantly above this median, while those in the bottom quartile fall well below. However, Current Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Sunspring Metal's current Current Ratio of 2.19 is 38.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Current Ratio mean?
A high Current Ratio can signal that a stock is expensive relative to its fundamentals. For the Construction industry, the median Current Ratio is 1.58 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Sunspring Metal's current Current Ratio is 2.19, which is 44% above median its own 10-year median of 1.52. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Sunspring Metal stock overvalued right now?
Based on GuruFocus' analysis, Sunspring Metal (TPE:2062) is currently considered Fairly Valued. The stock's GF Value™ is NT$20.93, compared to a current price of NT$19.30 — trading 7.8% below its estimated fair value. The current Current Ratio is 2.19, which is 44% above median its 10-year median of 1.52 and 38.6% above the Construction industry median of 1.58. Sunspring Metal's overall GF Score™ is 67/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Current Ratio calculated?
Current Ratio is calculated from a company's financial statements. For Sunspring Metal (TPE:2062), the current Current Ratio is 2.19 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Sunspring Metal (TPE:2062) Overvalued in 2026?
Based on GuruFocus' analysis, Sunspring Metal stock appears to be undervalued.
The current stock price of NT$19.30 is trading 7.8% below its estimated GF Value™ of NT$20.93.
GuruFocus considers Sunspring Metal to be Fairly Valued.
Key valuation signals for TPE:2062:
Current Ratio: 2.19 (44% above median its 10-year median of 1.52)
GF Value™: NT$20.93 vs. price of NT$19.30 (7.8% below fair value)
Industry Position: 38.6% above the Construction median (#487 of 1785)
No single metric tells the full story. See the TPE:2062 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Sunspring Metal Corporation is a Taiwan-based company mainly engaged in the manufacturing, processing, and trading of water pipe switch accessories, gate valves, corks, copper pipe fittings, and waterway sanitary equipment, and also the production and sales of bathroom spare parts. Geographically, the company has two operations: the Asia Operations Area, which includes production and sales in Asia, and the North America Operations Area, which includes production and sales in North America. The majority of its revenue derives from the Asia operations area.
67GF Score
Get the complete analysis for TPE:2062
Current Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:2062 has been successfully added to your 
