Sunspring Metal (TPE:2062) Piotroski F-Score: 4 (As of Jul. 11, 2026) — 33% Below Median


TPE:2062 Sunspring Metal Corp TPE:2062
67 GF Score
Price NT$19.30
GF Value NT$20.93
Valuation Fairly Valued
! 5 Warning Signs
View Full Analysis

What is Sunspring Metal Piotroski F-Score?

Sunspring Metal TPE:2062 67 Piotroski F-Score is 4 as of Jul. 11, 2026, which is 33% below its 10-year median of 6.00. GuruFocus rates TPE:2062 with a GF Score™ of 67/100 and a GF Value™ of NT$20.93 (Fairly Valued). The stock has 5 warning signs investors should review. Among 1,731 Construction companies, Sunspring Metal ranks worse than 65.34% on this metric.

The zones of discrimination were as such:

Good or high score = 7, 8, 9
Bad or low score = 0, 1, 2, 3

Sunspring Metal has an F-score of 4 indicating the company's financial situation is typical for a stable company.

The historical rank and industry rank for Sunspring Metal's Piotroski F-Score or its related term are showing as below:

TPE:2062' s Piotroski F-Score Range Over the Past 10 Years
Min: 4   Med: 6   Max: 7
Current: 4

During the past 13 years, the highest Piotroski F-Score of Sunspring Metal was 7. The lowest was 4. And the median was 6.

Sunspring Metal  (TPE:2062) Piotroski F-Score Explanation

The developer of the system is Joseph D. Piotroski is relatively unknown accounting professor who shuns publicity and rarely gives interviews.

He graduated from the University of Illinois with a B.S. in accounting in 1989, received an M.B.A. from Indiana University in 1994. Five years later, in 1999, after earning a Ph.D. in accounting from the University of Michigan, he became an associate professor of accounting at the University of Chicago.

In 2000, he wrote a research paper called "Value Investing: The Use of Historical Financial Statement Information to Separate Winners from Losers" (pdf).

He wanted to see if he can develop a system (using a simple nine-point scoring system) that can increase the returns of a strategy of investing in low price to book (referred to in the paper as high book to market) value companies.

What he found was something that exceeded his most optimistic expectations.

Buying only those companies that scored highest (8 or 9) on his nine-point scale, or F-Score as he called it, over the 20 year period from 1976 to 1996 led to an average out-performance over the market of 13.4%.

Even more impressive were the results of a strategy of investing in the highest F-Score companies (8 or 9) and shorting companies with the lowest F-Score (0 or 1).

Over the same period from 1976 to 1996 (20 years) this strategy led to an average yearly return of 23%, substantially outperforming the average S&P 500 index return of 15.83% over the same period.


Sunspring Metal Piotroski F-Score Related Terms


Sunspring Metal Piotroski F-Score Historical Data

* Premium members only.

The historical data trend for Sunspring Metal's Piotroski F-Score can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

Sunspring Metal Piotroski F-Score Chart

Sunspring Metal Annual Data
Trend Dec16 Dec17 Dec18 Dec19 Dec20 Dec21 Dec22 Dec23 Dec24 Dec25
Piotroski F-Score
Get a 7-Day Free Trial Premium Member Only Premium Member Only 6.00 7.00 6.00 7.00 4.00

Sunspring Metal Quarterly Data
Mar21 Jun21 Sep21 Dec21 Mar22 Jun22 Sep22 Dec22 Mar23 Jun23 Sep23 Dec23 Mar24 Jun24 Sep24 Dec24 Mar25 Jun25 Sep25 Dec25
Piotroski F-Score Get a 7-Day Free Trial Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only 7.00 7.00 4.00 5.00 4.00

TPE:2062 vs TT, JCI, CARR: Piotroski F-Score Comparison

For the Building Products & Equipment subindustry, Sunspring Metal's Piotroski F-Score, along with its competitors' market caps and Piotroski F-Score data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.


Sunspring Metal Piotroski F-Score vs Construction Industry

For the Construction industry and Industrials sector, Sunspring Metal's Piotroski F-Score distribution charts can be found below:

* The bar in red indicates where Sunspring Metal's Piotroski F-Score falls into.


TPE:2062
67GF Score
Sunspring Metal Corp TPE:2062
Piotroski F-Score is just one metric. See GF Score™, valuation, warning signs, and more.
View Full Analysis

How is the Piotroski F-Score calculated?

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

This Year (Dec25) TTM:Last Year (Dec24) TTM:
Net Income was 38.246 + 24.829 + -26.032 + 41.862 = NT$79 Mil.
Cash Flow from Operations was 446.993 + 313.213 + 262.107 + 165.097 = NT$1,187 Mil.
Revenue was 1523.766 + 1517.6 + 1613.95 + 1633.03 = NT$6,288 Mil.
Gross Profit was 183.741 + 126.329 + 115.835 + 184.707 = NT$611 Mil.
Average Total Assets from the begining of this year (Dec24)
to the end of this year (Dec25) was
(11473.312 + 11209.539 + 10351.718 + 10721.302 + 11247.296) / 5 = NT$11000.6334 Mil.
Total Assets at the begining of this year (Dec24) was NT$11,473 Mil.
Long-Term Debt & Capital Lease Obligation was NT$957 Mil.
Total Current Assets was NT$5,131 Mil.
Total Current Liabilities was NT$2,338 Mil.
Net Income was 145.581 + 213.069 + 75.334 + 110.54 = NT$545 Mil.

Revenue was 1988.397 + 2042.617 + 1811.439 + 1729.959 = NT$7,572 Mil.
Gross Profit was 262.896 + 368.629 + 254.273 + 207.956 = NT$1,094 Mil.
Average Total Assets from the begining of last year (Dec23)
to the end of last year (Dec24) was
(12837.068 + 12875.793 + 12060.696 + 11557.531 + 11473.312) / 5 = NT$12160.88 Mil.
Total Assets at the begining of last year (Dec23) was NT$12,837 Mil.
Long-Term Debt & Capital Lease Obligation was NT$978 Mil.
Total Current Assets was NT$5,537 Mil.
Total Current Liabilities was NT$2,186 Mil.

*Note: If the latest quarterly/semi-annual/annual total assets data is 0, then we will use previous quarterly/semi-annual/annual data for all the items in the balance sheet.

Profitability

Question 1. Return on Assets (ROA)

Net income before extraordinary items for the year divided by Total Assets at the beginning of the year.

Score 1 if positive, 0 if negative.

Sunspring Metal's current Net Income (TTM) was 79. ==> Positive ==> Score 1.

Question 2. Cash Flow Return on Assets (CFROA)

Net cash flow from operating activities (operating cash flow) divided by Total Assets at the beginning of the year.

Score 1 if positive, 0 if negative.

Sunspring Metal's current Cash Flow from Operations (TTM) was 1,187. ==> Positive ==> Score 1.

Question 3. Change in Return on Assets

Compare this year's return on assets (1) to last year's return on assets.

Score 1 if it's higher, 0 if it's lower.

ROA (This Year)=Net Income/Total Assets (Dec24)
=78.905/11473.312
=0.00687726

ROA (Last Year)=Net Income/Total Assets (Dec23)
=544.524/12837.068
=0.0424181

Sunspring Metal's return on assets of this year was 0.00687726. Sunspring Metal's return on assets of last year was 0.0424181. ==> Last year is higher ==> Score 0.

Question 4. Quality of Earnings (Accrual)

Compare Cash flow return on assets (2) to return on assets (1)

Score 1 if CFROA > ROA, 0 if CFROA <= ROA.

Sunspring Metal's current Net Income (TTM) was 79. Sunspring Metal's current Cash Flow from Operations (TTM) was 1,187. ==> 1,187 > 79 ==> CFROA > ROA ==> Score 1.

Funding

Question 5. Change in Gearing or Leverage

Compare this year's gearing (long-term debt divided by average total assets) to last year's gearing.

Score 0 if this year's gearing is higher, 1 otherwise.

Gearing (This Year: Dec25)=Long-Term Debt & Capital Lease Obligation/Average Total Assets from Dec24 to Dec25
=957.249/11000.6334
=0.08701763

Gearing (Last Year: Dec24)=Long-Term Debt & Capital Lease Obligation/Average Total Assets from Dec23 to Dec24
=978.076/12160.88
=0.08042806

Sunspring Metal's gearing of this year was 0.08701763. Sunspring Metal's gearing of last year was 0.08042806. ==> Last year is lower than this year ==> Score 0.

Question 6. Change in Working Capital (Liquidity)

Compare this year's current ratio (current assets divided by current liabilities) to last year's current ratio.

Score 1 if this year's current ratio is higher, 0 if it's lower

Current Ratio (This Year: Dec25)=Total Current Assets/Total Current Liabilities
=5131.012/2338.428
=2.19421423

Current Ratio (Last Year: Dec24)=Total Current Assets/Total Current Liabilities
=5537.255/2185.716
=2.53338265

Sunspring Metal's current ratio of this year was 2.19421423. Sunspring Metal's current ratio of last year was 2.53338265. ==> Last year's current ratio is higher ==> Score 0.

Question 7. Change in Shares in Issue

Compare the number of shares in issue this year, to the number in issue last year.

Score 0 if there is larger number of shares in issue this year, 1 otherwise.

Sunspring Metal's number of shares in issue this year was 202.161. Sunspring Metal's number of shares in issue last year was 202.983. ==> There is smaller number of shares in issue this year, or the same. ==> Score 1.

Efficiency

Question 8. Change in Gross Margin

Compare this year's gross margin (Gross Profit divided by sales) to last year's.

Score 1 if this year's gross margin is higher, 0 if it's lower.

Gross Margin (This Year: TTM)=Gross Profit/Revenue
=610.612/6288.346
=0.09710216

Gross Margin (Last Year: TTM)=Gross Profit/Revenue
=1093.754/7572.412
=0.14443931

Sunspring Metal's gross margin of this year was 0.09710216. Sunspring Metal's gross margin of last year was 0.14443931. ==> Last year's gross margin is higher ==> Score 0.

Question 9. Change in asset turnover

Compare this year's asset turnover (total sales for the year divided by total assets at the beginning of the year) to last year's asset turnover ratio.

Score 1 if this year's asset turnover ratio is higher, 0 if it's lower

Asset Turnover (This Year)=Revenue/Total Assets at the Beginning of This Year (Dec24)
=6288.346/11473.312
=0.54808463

Asset Turnover (Last Year)=Revenue/Total Assets at the Beginning of Last Year (Dec23)
=7572.412/12837.068
=0.58988641

Sunspring Metal's asset turnover of this year was 0.54808463. Sunspring Metal's asset turnover of last year was 0.58988641. ==> Last year's asset turnover is higher ==> Score 0.

Evaluation

Piotroski F-Score= Que. 1+ Que. 2+ Que. 3+Que. 4+Que. 5+Que. 6+Que. 7+Que. 8+Que. 9
=1+1+0+1+0+0+1+0+0
=4

Good or high score = 7, 8, 9
Bad or low score = 0, 1, 2, 3

Sunspring Metal has an F-score of 4 indicating the company's financial situation is typical for a stable company.

Frequently Asked Questions Learn more about Piotroski F-Score →
What does a Piotroski F-Score of 4 mean?
Sunspring Metal (TPE:2062) has a Piotroski F-Score of 4 as of Jul. 11, 2026. The Piotroski F-score grades a company's business operating strength from 0-9. View historical data on Sunspring Metal and its competitors. This is 33% below median its historical median of 6.00. Over the past decade, Sunspring Metal's Piotroski F-Score has ranged from 4.00 to 7.00. According to the industry distribution chart, Sunspring Metal ranks #1131 out of 1731 companies in the Construction industry, placing it in the top 65.3%.
Is Sunspring Metal's Piotroski F-Score too high?
Sunspring Metal's current Piotroski F-Score of 4 is 33% below median its 10-year median of 6.00. Over the past 10 years, this metric has ranged from a low of 4.00 to a high of 7.00. The Construction industry median Piotroski F-Score is 5.00. Sunspring Metal's value of 4 is 20% below this industry median. Based on the distribution chart, Sunspring Metal ranks #1131 out of 1731 companies in the Construction industry, which is below the industry midpoint. Overall, Sunspring Metal has a GF Score™ of 67/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Sunspring Metal's Piotroski F-Score compare to TT and JCI?
According to the Construction industry distribution chart, Sunspring Metal ranks #1131 out of 1731 companies for Piotroski F-Score. This places Sunspring Metal in the lower half of its industry. The industry median Piotroski F-Score is 5.00. Sunspring Metal's value of 4 is 20% below this benchmark. Historically, Sunspring Metal's own Piotroski F-Score has ranged from 4.00 to 7.00 over the past decade. While the company's 10-year median is 6.00 vs. the industry median of 5.00, Sunspring Metal has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Piotroski F-Score for a Construction company?
The median Piotroski F-Score among Construction companies is 5.00, based on 1,731 companies in the industry. Companies in the top quartile (top 25%) have a Piotroski F-Score significantly above this median, while those in the bottom quartile fall well below. However, Piotroski F-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Sunspring Metal's current Piotroski F-Score of 4 is 20% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Piotroski F-Score mean?
A high Piotroski F-Score can signal that a stock is expensive relative to its fundamentals. The Piotroski F-score grades a company's business operating strength from 0-9. View historical data on Sunspring Metal and its competitors. For the Construction industry, the median Piotroski F-Score is 5.00 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Sunspring Metal's current Piotroski F-Score is 4, which is 33% below median its own 10-year median of 6.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Sunspring Metal stock overvalued right now?
Based on GuruFocus' analysis, Sunspring Metal (TPE:2062) is currently considered Fairly Valued. The stock's GF Value™ is NT$20.93, compared to a current price of NT$19.30 — trading 7.8% below its estimated fair value. The current Piotroski F-Score is 4, which is 33% below median its 10-year median of 6.00 and 20% below the Construction industry median of 5.00. Sunspring Metal's overall GF Score™ is 67/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Piotroski F-Score calculated?
Piotroski F-Score is calculated from a company's financial statements. For Sunspring Metal (TPE:2062), the current Piotroski F-Score is 4 as of Jul. 11, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

Is Sunspring Metal (TPE:2062) Overvalued in 2026?

Based on GuruFocus' analysis, Sunspring Metal stock appears to be undervalued. The current stock price of NT$19.30 is trading 7.8% below its estimated GF Value™ of NT$20.93. GuruFocus considers Sunspring Metal to be Fairly Valued.

Key valuation signals for TPE:2062:

  • Piotroski F-Score: 4 (33% below median its 10-year median of 6.00)
  • GF Value™: NT$20.93 vs. price of NT$19.30 (7.8% below fair value)
  • GF Score™: 67/100 with 5 warning signs
  • Industry Position: 20% below the Construction median (#1131 of 1731)

No single metric tells the full story. See the TPE:2062 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.


Sunspring Metal Business Description

Address No. 11, Keya Road, Taichung Science Park, Daya District, Taichung, TWN
Sunspring Metal Corporation is a Taiwan-based company mainly engaged in the manufacturing, processing, and trading of water pipe switch accessories, gate valves, corks, copper pipe fittings, and waterway sanitary equipment, and also the production and sales of bathroom spare parts. Geographically, the company has two operations: the Asia Operations Area, which includes production and sales in Asia, and the North America Operations Area, which includes production and sales in North America. The majority of its revenue derives from the Asia operations area.
67GF Score

Get the complete analysis for TPE:2062

Piotroski F-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.

NT$19.30
Price
NT$20.93
GF Value