Bisalloy Steel GroupASX:BIS +1.12%78 Cyclically Adjusted PS Ratio is 1.71 as of Jul. 13, 2026, which is 131% above its 10-year median of 0.74. GuruFocus rates ASX:BIS with a GF Score™ of 78/100 and a GF Value™ of A$3.49 (Modestly Overvalued). The stock has 1 warning sign investors should review. Among 514 Steel companies, Bisalloy Steel Group ranks worse than 85.21% on this metric.
The historical rank and industry rank for Bisalloy Steel Group's Cyclically Adjusted PS Ratio or its related term are showing as below:
ASX:BIS'
s Cyclically Adjusted PS Ratio Range Over the Past 10 Years
Min: 0.07 Med: 0.74 Max: 2.27
Current: 1.71
During the past 13 years, Bisalloy Steel Group's highest Cyclically Adjusted PS Ratio was 2.27. The lowest was 0.07. And the median was 0.74.
ASX:BIS's Cyclically Adjusted PS Ratio is ranked worse than 85.21% of 514
companies
in the Steel industry
Industry Median: 0.455
vs ASX:BIS: 1.71
The Shiller PE Ratio was first used by professor Robert Shiller. He uses E10 for his Shiller PE Ratio calculation. E10 is the average of the inflation adjusted earnings per share of a company over the past 10 years. The similar calculation is applied by GuruFocus to calculate the Cyclically Adjusted PS Ratio. The Cyclically Adjusted Revenue per Share is the average of the inflation adjusted revenue per share of a company over the past 10 years.
Bisalloy Steel Group's adjusted revenue per share data of for the fiscal year that ended in Jun25 was A$3.145. Add all the adjusted revenue per share for the past 10 years together and divide 10 will get our Cyclically Adjusted Revenue per Share, which is A$2.65 for the trailing ten years ended in Jun25.
Shiller PE for Stocks: The True Measure of Stock Valuation
Bisalloy Steel Group (ASX:BIS) Cyclically Adjusted PS Ratio Explanation
Compared with the regular PS Ratio, which works poorly for cyclical businesses, the Cyclically Adjusted PS Ratio smoothed out the fluctuations of revenue during business cycles. Therefore it is more accurate in reflecting the valuation of the company.
If a company has consistent business performance, the Cyclically Adjusted PS Ratio should give similar results to regular PS Ratio.
Bisalloy Steel Group Cyclically Adjusted PS Ratio Related Terms
Bisalloy Steel Group Cyclically Adjusted PS Ratio Historical Data
* Premium members only.
The historical data trend for Bisalloy Steel Group's Cyclically Adjusted PS Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Bisalloy Steel Group Cyclically Adjusted PS Ratio Chart
ASX:BIS vs NUE, STLD, RS: Cyclically Adjusted PS Ratio Comparison
For the Steel subindustry, Bisalloy Steel Group's Cyclically Adjusted PS Ratio, along with its competitors' market caps and Cyclically Adjusted PS Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Bisalloy Steel Group Cyclically Adjusted PS Ratio vs Steel Industry
For the Steel industry and Basic Materials sector, Bisalloy Steel Group's Cyclically Adjusted PS Ratio distribution charts can be found below:
* The bar in red indicates where Bisalloy Steel Group's Cyclically Adjusted PS Ratio falls into.
Bisalloy Steel Group Cyclically Adjusted PS Ratio Calculation
Like the Shiller PE Ratio, the Cyclically Adjusted PS Ratio takes the Revenue per Share from the past 10 years, adjusts it for inflation, and then calculates the average. This average is then used for the P/S calculation. Because it considers this 10-year average, it's often referred to as the CAPS Ratio.
The Shiller PE Ratio was first used by professor Robert Shiller to measure the valuation of the overall market. The similar calculation is applied by GuruFocus to calculate the Cyclically Adjusted PS Ratio.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Please note that we use the CPI data of the country/region where the company is headquartered. If the CPI data for that country/region is not available, then we will use the CPI data of the United States as default.
What does a Cyclically Adjusted PS Ratio of 1.71 mean?
Bisalloy Steel Group (ASX:BIS) has a Cyclically Adjusted PS Ratio of 1.71 as of Jul. 13, 2026. Cyclically Adjusted PS Ratio is the ratio of share price to a company's inflation-adjusted revenue per share over a 10-year period. View historical data on Bisalloy Steel Group and its competitors. This is 131% above median its historical median of 0.74. Over the past decade, Bisalloy Steel Group's Cyclically Adjusted PS Ratio has ranged from 0.07 to 2.27. According to the industry distribution chart, Bisalloy Steel Group ranks #438 out of 514 companies in the Steel industry, placing it in the top 85.2%.
Is Bisalloy Steel Group's Cyclically Adjusted PS Ratio too high?
Bisalloy Steel Group's current Cyclically Adjusted PS Ratio of 1.71 is 131% above median its 10-year median of 0.74. Over the past 10 years, this metric has ranged from a low of 0.07 to a high of 2.27. The Steel industry median Cyclically Adjusted PS Ratio is 0.46. Bisalloy Steel Group's value of 1.71 is 275.8% above this industry median. Based on the distribution chart, Bisalloy Steel Group ranks #438 out of 514 companies in the Steel industry, which is in the bottom quartile relative to peers. Overall, Bisalloy Steel Group has a GF Score™ of 78/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Bisalloy Steel Group's Cyclically Adjusted PS Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, Bisalloy Steel Group ranks #438 out of 514 companies for Cyclically Adjusted PS Ratio. This places Bisalloy Steel Group in the lower half of its industry. The industry median Cyclically Adjusted PS Ratio is 0.46. Bisalloy Steel Group's value of 1.71 is 275.8% above this benchmark. Historically, Bisalloy Steel Group's own Cyclically Adjusted PS Ratio has ranged from 0.07 to 2.27 over the past decade. While the company's 10-year median is 0.74 vs. the industry median of 0.46, Bisalloy Steel Group has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Cyclically Adjusted PS Ratio for a Steel company?
The median Cyclically Adjusted PS Ratio among Steel companies is 0.46, based on 514 companies in the industry. Companies in the top quartile (top 25%) have a Cyclically Adjusted PS Ratio significantly above this median, while those in the bottom quartile fall well below. However, Cyclically Adjusted PS Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Bisalloy Steel Group's current Cyclically Adjusted PS Ratio of 1.71 is 275.8% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Cyclically Adjusted PS Ratio mean?
A high Cyclically Adjusted PS Ratio can signal that a stock is expensive relative to its fundamentals. Cyclically Adjusted PS Ratio is the ratio of share price to a company's inflation-adjusted revenue per share over a 10-year period. View historical data on Bisalloy Steel Group and its competitors. For the Steel industry, the median Cyclically Adjusted PS Ratio is 0.46 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Bisalloy Steel Group's current Cyclically Adjusted PS Ratio is 1.71, which is 131% above median its own 10-year median of 0.74. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Bisalloy Steel Group stock overvalued right now?
Based on GuruFocus' analysis, Bisalloy Steel Group (ASX:BIS) is currently considered Modestly Overvalued. The stock's GF Value™ is A$3.49, compared to a current price of A$4.52 — trading 29.5% above its estimated fair value. The current Cyclically Adjusted PS Ratio is 1.71, which is 131% above median its 10-year median of 0.74 and 275.8% above the Steel industry median of 0.46. Bisalloy Steel Group's overall GF Score™ is 78/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Cyclically Adjusted PS Ratio calculated?
Cyclically Adjusted PS Ratio is calculated from a company's financial statements. For Bisalloy Steel Group (ASX:BIS), the current Cyclically Adjusted PS Ratio is 1.71 as of Jul. 13, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Bisalloy Steel Group (ASX:BIS) Overvalued in 2026?
Based on GuruFocus' analysis, Bisalloy Steel Group stock appears to be overvalued.
The current stock price of A$4.52 is trading 29.5% above its estimated GF Value™ of A$3.49.
GuruFocus considers Bisalloy Steel Group to be Modestly Overvalued.
Key valuation signals for ASX:BIS:
Cyclically Adjusted PS Ratio: 1.71 (131% above median its 10-year median of 0.74)
GF Value™: A$3.49 vs. price of A$4.52 (29.5% above fair value)
Industry Position: 275.8% above the Steel median (#438 of 514)
No single metric tells the full story. See the ASX:BIS stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Bisalloy Steel Group Ltd is engaged in the processing and sale of quenched and tempered high-tensile, and abrasion-resistant steel plates. The company is organized into geographical operating segments, being Australian Operations is engaged in the distribution of wear-grade and high tensile plates through distributors and directly to original equipment manufacturers in both Australia and Overseas. Its Overseas Operations engage in the distribution of the abrasion-resistant plate as well as other steel plate products. The Overseas Operations also focus on the marketing and distribution of quench and tempered steel plates. The majority of its revenue is derived from Australian Operations.
78GF Score
Get the complete analysis for ASX:BIS
Cyclically Adjusted PS Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ASX:BIS has been successfully added to your 
