Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Aero Win TechnologyTPE:8222 -3.97%82 Days Payable is 51.67 as of Dec. 2025, which is 22% above its 10-year median of 42.41. GuruFocus rates TPE:8222 with a GF Score™ of 82/100 and a GF Value™ of NT$65.40 (Significantly Undervalued). The stock has 5 warning signs investors should review. Among 340 Aerospace & Defense companies, Aero Win Technology ranks worse than 61.76% on this metric.
The historical rank and industry rank for Aero Win Technology's Days Payable or its related term are showing as below:
TPE:8222'
s Days Payable Range Over the Past 10 Years
Min: 18.75 Med: 42.41 Max: 60.25
Current: 49.32
During the past 13 years, Aero Win Technology's highest Days Payable was 60.25. The lowest was 18.75. And the median was 42.41.
TPE:8222's Days Payable is ranked worse than 61.76% of 340
companies
in the Aerospace & Defense industry
Industry Median: 64.565
vs TPE:8222: 49.32
Aero Win Technology's Days Payable
declined
from Dec. 2024 (64.99) to Dec. 2025 (51.67).
It may suggest that Aero Win Technologyaccelerated paying its suppliers.
Aero Win Technology Days Payable Related Terms
Aero Win Technology Days Payable Historical Data
* Premium members only.
The historical data trend for Aero Win Technology's Days Payable can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TPE:8222 vs SPCX, GE, RTX: Days Payable Comparison
For the Aerospace & Defense subindustry, Aero Win Technology's Days Payable, along with its competitors' market caps and Days Payable data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Aero Win Technology Days Payable vs Aerospace & Defense Industry
For the Aerospace & Defense industry and Industrials sector, Aero Win Technology's Days Payable distribution charts can be found below:
* The bar in red indicates where Aero Win Technology's Days Payable falls into.
Days Payable indicates the number of days that the account payable relative to cost of goods sold the company has. An increase of Days Payable may suggest that the company delays paying its suppliers.
Aero Win Technology's Days Payable for the fiscal year that ended in Dec. 2025 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Aero Win Technology (TPE:8222) has a Days Payable of 51.67 as of Dec. 2025. Days payable represents the average amount of days a company waits to pay its invoices from suppliers. View historical data on Aero Win Technology and its competitors. This is 22% above median its historical median of 42.41. Over the past decade, Aero Win Technology's Days Payable has ranged from 18.75 to 60.25. According to the industry distribution chart, Aero Win Technology ranks #210 out of 340 companies in the Aerospace & Defense industry, placing it in the top 61.8%.
Is Aero Win Technology's Days Payable too high?
Aero Win Technology's current Days Payable of 51.67 is 22% above median its 10-year median of 42.41. Over the past 10 years, this metric has ranged from a low of 18.75 to a high of 60.25. The Aerospace & Defense industry median Days Payable is 64.57. Aero Win Technology's value of 51.67 is 20% below this industry median. Based on the distribution chart, Aero Win Technology ranks #210 out of 340 companies in the Aerospace & Defense industry, which is below the industry midpoint. Overall, Aero Win Technology has a GF Score™ of 82/100 and is considered Significantly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Aero Win Technology's Days Payable compare to SPCX and GE?
According to the Aerospace & Defense industry distribution chart, Aero Win Technology ranks #210 out of 340 companies for Days Payable. This places Aero Win Technology in the lower half of its industry. The industry median Days Payable is 64.57. Aero Win Technology's value of 51.67 is 20% below this benchmark. Historically, Aero Win Technology's own Days Payable has ranged from 18.75 to 60.25 over the past decade. While the company's 10-year median is 42.41 vs. the industry median of 64.57, Aero Win Technology has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Days Payable for an Aerospace & Defense company?
The median Days Payable among Aerospace & Defense companies is 64.57, based on 340 companies in the industry. Companies in the top quartile (top 25%) have a Days Payable significantly above this median, while those in the bottom quartile fall well below. However, Days Payable should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Aero Win Technology's current Days Payable of 51.67 is 20% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Days Payable mean?
A high Days Payable can signal that a stock is expensive relative to its fundamentals. Days payable represents the average amount of days a company waits to pay its invoices from suppliers. View historical data on Aero Win Technology and its competitors. For the Aerospace & Defense industry, the median Days Payable is 64.57 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Aero Win Technology's current Days Payable is 51.67, which is 22% above median its own 10-year median of 42.41. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Aero Win Technology stock overvalued right now?
Based on GuruFocus' analysis, Aero Win Technology (TPE:8222) is currently considered Significantly Undervalued. The stock's GF Value™ is NT$65.40, compared to a current price of NT$39.90 — trading 39% below its estimated fair value. The current Days Payable is 51.67, which is 22% above median its 10-year median of 42.41 and 20% below the Aerospace & Defense industry median of 64.57. Aero Win Technology's overall GF Score™ is 82/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Days Payable calculated?
Days Payable is calculated from a company's financial statements. For Aero Win Technology (TPE:8222), the current Days Payable is 51.67 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Aero Win Technology (TPE:8222) Overvalued in 2026?
Based on GuruFocus' analysis, Aero Win Technology stock appears to be undervalued.
The current stock price of NT$39.90 is trading 39% below its estimated GF Value™ of NT$65.40.
GuruFocus considers Aero Win Technology to be Significantly Undervalued.
Key valuation signals for TPE:8222:
Days Payable: 51.67 (22% above median its 10-year median of 42.41)
GF Value™: NT$65.40 vs. price of NT$39.90 (39% below fair value)
Industry Position: 20% below the Aerospace & Defense median (#210 of 340)
No single metric tells the full story. See the TPE:8222 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Aero Win Technology Corp mainly engaged in the manufacturing, repairing, and trading of various types of aviation and engine accessories and hardware tools, as well as the trading of various types of aviation alloy material and hardware. Additionally, the Company acts as an agent for domestic and foreign manufacturers in distribution, bidding, quoting, and various import and export trade activities. The company has single operating segment. The Company has no foreign operation. Its products are Oil Collecto; Plenum, Inlet Air; Rear Flange; Front Flange; Oil Cover Inlet; SAGB Casing; Bearing Support; Cooling Insert of vane; Brackets; Combustion Liner; Combustion Chamber Liner; Inner and Outer Rings for Stators; Flanges for Stator; Ring Assembly, Curvic; Inlet Housing; and Case, Diffuser.
82GF Score
Get the complete analysis for TPE:8222
Days Payable is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:8222 has been successfully added to your 
