Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Alumil Aluminium IndustryATH:ALMY -0.54%70 Debt-to-EBITDA is 2.62 as of Dec. 2025, which is 40% below its 10-year median of 4.36. GuruFocus rates ATH:ALMY with a GF Score™ of 70/100 and a GF Value™ of €4.09 (Significantly Overvalued). The stock has 3 warning signs investors should review. Among 595 Metals & Mining companies, Alumil Aluminium Industry ranks worse than 67.23% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Alumil Aluminium Industry's Debt-to-EBITDA or its related term are showing as below:
ATH:ALMY'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: -19.88 Med: 4.36 Max: 12.1
Current: 2.63
During the past 13 years, the highest Debt-to-EBITDA Ratio of Alumil Aluminium Industry was 12.10. The lowest was -19.88. And the median was 4.36.
ATH:ALMY's Debt-to-EBITDA is ranked worse than 67.23% of 595
companies
in the Metals & Mining industry
Industry Median: 1.22
vs ATH:ALMY: 2.63
Alumil Aluminium Industry (ATH:ALMY) Debt-to-EBITDA Explanation
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Alumil Aluminium Industry Debt-to-EBITDA Related Terms
Alumil Aluminium Industry Debt-to-EBITDA Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ATH:ALMY vs AA, CENX, CSTM: Debt-to-EBITDA Comparison
For the Aluminum subindustry, Alumil Aluminium Industry's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Alumil Aluminium Industry Debt-to-EBITDA vs Metals & Mining Industry
For the Metals & Mining industry and Basic Materials sector, Alumil Aluminium Industry's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Alumil Aluminium Industry's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is two times the quarterly (Dec. 2025) EBITDA data.
Alumil Aluminium Industry (ATH:ALMY) has a Debt-to-EBITDA of 2.62 as of Dec. 2025. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Alumil Aluminium Industry. This is 40% below median its historical median of 4.36. According to the industry distribution chart, Alumil Aluminium Industry ranks #400 out of 595 companies in the Metals & Mining industry, placing it in the top 67.2%.
Is Alumil Aluminium Industry's Debt-to-EBITDA too high?
Alumil Aluminium Industry's current Debt-to-EBITDA of 2.62 is 40% below median its 10-year median of 4.36. The Metals & Mining industry median Debt-to-EBITDA is 1.22. Alumil Aluminium Industry's value of 2.62 is 114.8% above this industry median. Based on the distribution chart, Alumil Aluminium Industry ranks #400 out of 595 companies in the Metals & Mining industry, which is below the industry midpoint. Overall, Alumil Aluminium Industry has a GF Score™ of 70/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Alumil Aluminium Industry's Debt-to-EBITDA compare to AA and CENX?
According to the Metals & Mining industry distribution chart, Alumil Aluminium Industry ranks #400 out of 595 companies for Debt-to-EBITDA. This places Alumil Aluminium Industry in the lower half of its industry. The industry median Debt-to-EBITDA is 1.22. Alumil Aluminium Industry's value of 2.62 is 114.8% above this benchmark. While the company's 10-year median is 4.36 vs. the industry median of 1.22, Alumil Aluminium Industry has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for a Metals & Mining company?
The median Debt-to-EBITDA among Metals & Mining companies is 1.22, based on 595 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Alumil Aluminium Industry's current Debt-to-EBITDA of 2.62 is 114.8% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Alumil Aluminium Industry. For the Metals & Mining industry, the median Debt-to-EBITDA is 1.22 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Alumil Aluminium Industry's current Debt-to-EBITDA is 2.62, which is 40% below median its own 10-year median of 4.36. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Alumil Aluminium Industry stock overvalued right now?
Based on GuruFocus' analysis, Alumil Aluminium Industry (ATH:ALMY) is currently considered Significantly Overvalued. The stock's GF Value™ is €4.09, compared to a current price of €5.55 — trading 35.7% above its estimated fair value. The current Debt-to-EBITDA is 2.62, which is 40% below median its 10-year median of 4.36 and 114.8% above the Metals & Mining industry median of 1.22. Alumil Aluminium Industry's overall GF Score™ is 70/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Alumil Aluminium Industry (ATH:ALMY), the current Debt-to-EBITDA is 2.62 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Alumil Aluminium Industry (ATH:ALMY) Overvalued in 2026?
Based on GuruFocus' analysis, Alumil Aluminium Industry stock appears to be overvalued.
The current stock price of €5.55 is trading 35.7% above its estimated GF Value™ of €4.09.
GuruFocus considers Alumil Aluminium Industry to be Significantly Overvalued.
Key valuation signals for ATH:ALMY:
Debt-to-EBITDA: 2.62 (40% below median its 10-year median of 4.36)
GF Value™: €4.09 vs. price of €5.55 (35.7% above fair value)
Industry Position: 114.8% above the Metals & Mining median (#400 of 595)
No single metric tells the full story. See the ATH:ALMY stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Alumil Aluminium Industry SA produces and distributes aluminium products. The company's main products include windows-doors, Entrance doors, Complementary systems for Windows & Doors, Curtain Walls, Shading systems, Railings and Fences, Wall Cladding systems, Partitions and Atriums.
70GF Score
Get the complete analysis for ATH:ALMY
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ATH:ALMY has been successfully added to your 
