Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Alumil Aluminium IndustryATH:ALMY +1.23%68 PEG Ratio is 132.11 as of Jul. 14, 2026, which is 1089% above its 10-year median of 11.11. GuruFocus rates ATH:ALMY with a GF Score™ of 68/100 and a GF Value™ of €4.07 (Significantly Overvalued). The stock has 3 warning signs investors should review. Among 312 Metals & Mining companies, Alumil Aluminium Industry ranks worse than 99.04% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Alumil Aluminium Industry's PEG Ratio or its related term are showing as below:
ATH:ALMY'
s PEG Ratio Range Over the Past 10 Years
Min: 3.94 Med: 11.11 Max: 132.11
Current: 132.11
During the past 13 years, Alumil Aluminium Industry's highest PEG Ratio was 132.11. The lowest was 3.94. And the median was 11.11.
ATH:ALMY's PEG Ratio is ranked worse than 99.04% of 312
companies
in the Metals & Mining industry
Industry Median: 1.16
vs ATH:ALMY: 132.11
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Alumil Aluminium Industry (ATH:ALMY) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Alumil Aluminium Industry PEG Ratio Related Terms
Alumil Aluminium Industry PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Aluminum subindustry, Alumil Aluminium Industry's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Alumil Aluminium Industry PEG Ratio vs Metals & Mining Industry
For the Metals & Mining industry and Basic Materials sector, Alumil Aluminium Industry's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Alumil Aluminium Industry's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Alumil Aluminium Industry (ATH:ALMY) has a PEG Ratio of 132.11 as of Jul. 14, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Alumil Aluminium Industry and its competitors. This is 1089% above median its historical median of 11.11. Over the past decade, Alumil Aluminium Industry's PEG Ratio has ranged from 3.94 to 132.11. According to the industry distribution chart, Alumil Aluminium Industry ranks #309 out of 312 companies in the Metals & Mining industry, placing it in the top 99%.
Is Alumil Aluminium Industry's PEG Ratio too high?
Alumil Aluminium Industry's current PEG Ratio of 132.11 is 1089% above median its 10-year median of 11.11. Over the past 10 years, this metric has ranged from a low of 3.94 to a high of 132.11. The Metals & Mining industry median PEG Ratio is 1.16. Alumil Aluminium Industry's value of 132.11 is 11288.8% above this industry median. Based on the distribution chart, Alumil Aluminium Industry ranks #309 out of 312 companies in the Metals & Mining industry, which is in the bottom quartile relative to peers. Overall, Alumil Aluminium Industry has a GF Score™ of 68/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Alumil Aluminium Industry's PEG Ratio compare to AA and CENX?
According to the Metals & Mining industry distribution chart, Alumil Aluminium Industry ranks #309 out of 312 companies for PEG Ratio. This places Alumil Aluminium Industry in the lower half of its industry. The industry median PEG Ratio is 1.16. Alumil Aluminium Industry's value of 132.11 is 11288.8% above this benchmark. Historically, Alumil Aluminium Industry's own PEG Ratio has ranged from 3.94 to 132.11 over the past decade. While the company's 10-year median is 11.11 vs. the industry median of 1.16, Alumil Aluminium Industry has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Metals & Mining company?
The median PEG Ratio among Metals & Mining companies is 1.16, based on 312 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Alumil Aluminium Industry's current PEG Ratio of 132.11 is 11288.8% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Alumil Aluminium Industry and its competitors. For the Metals & Mining industry, the median PEG Ratio is 1.16 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Alumil Aluminium Industry's current PEG Ratio is 132.11, which is 1089% above median its own 10-year median of 11.11. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Alumil Aluminium Industry stock overvalued right now?
Based on GuruFocus' analysis, Alumil Aluminium Industry (ATH:ALMY) is currently considered Significantly Overvalued. The stock's GF Value™ is €4.07, compared to a current price of €5.76 — trading 41.5% above its estimated fair value. The current PEG Ratio is 132.11, which is 1089% above median its 10-year median of 11.11 and 11288.8% above the Metals & Mining industry median of 1.16. Alumil Aluminium Industry's overall GF Score™ is 68/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Alumil Aluminium Industry (ATH:ALMY), the current PEG Ratio is 132.11 as of Jul. 14, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Alumil Aluminium Industry (ATH:ALMY) Overvalued in 2026?
Based on GuruFocus' analysis, Alumil Aluminium Industry stock appears to be overvalued.
The current stock price of €5.76 is trading 41.5% above its estimated GF Value™ of €4.07.
GuruFocus considers Alumil Aluminium Industry to be Significantly Overvalued.
Key valuation signals for ATH:ALMY:
PEG Ratio: 132.11 (1089% above median its 10-year median of 11.11)
GF Value™: €4.07 vs. price of €5.76 (41.5% above fair value)
Industry Position: 11288.8% above the Metals & Mining median (#309 of 312)
No single metric tells the full story. See the ATH:ALMY stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Alumil Aluminium Industry SA produces and distributes aluminium products. The company's main products include windows-doors, Entrance doors, Complementary systems for Windows & Doors, Curtain Walls, Shading systems, Railings and Fences, Wall Cladding systems, Partitions and Atriums.
68GF Score
Get the complete analysis for ATH:ALMY
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ATH:ALMY has been successfully added to your 
