Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for P.C.S. Machine Group Holding PCL's Debt-to-EBITDA or its related term are showing as below:
BKK:PCSGH-R'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 0 Med: 0.2 Max: 0.44
Current: 0.24
During the past 13 years, the highest Debt-to-EBITDA Ratio of P.C.S. Machine Group Holding PCL was 0.44. The lowest was 0.00. And the median was 0.20.
BKK:PCSGH-R's Debt-to-EBITDA is ranked better than 88.64% of 1109
companies
in the Vehicles & Parts industry
Industry Median: 2.29
vs BKK:PCSGH-R: 0.24
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
P.C.S. Machine Group Holding PCL Debt-to-EBITDA Related Terms
P.C.S. Machine Group Holding PCL Debt-to-EBITDA Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
P.C.S. Machine Group Holding PCL Debt-to-EBITDA Chart
BKK:PCSGH-R vs ORLY, AZO: Debt-to-EBITDA Comparison
For the Auto Parts subindustry, P.C.S. Machine Group Holding PCL's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
P.C.S. Machine Group Holding PCL Debt-to-EBITDA vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, P.C.S. Machine Group Holding PCL's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where P.C.S. Machine Group Holding PCL's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Jun. 2026) EBITDA data.
P.C.S. Machine Group Holding PCL (BKK:PCSGH-R) has a Debt-to-EBITDA of 0.34 as of Jun. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on P.C.S. Machine Group Holding PCL. This is 70% above median its historical median of 0.20. According to the industry distribution chart, P.C.S. Machine Group Holding PCL ranks #126 out of 1109 companies in the Vehicles & Parts industry, placing it in the top 11.4%.
Is P.C.S. Machine Group Holding PCL's Debt-to-EBITDA too high?
P.C.S. Machine Group Holding PCL's current Debt-to-EBITDA of 0.34 is 70% above median its 10-year median of 0.20. The Vehicles & Parts industry median Debt-to-EBITDA is 2.29. P.C.S. Machine Group Holding PCL's value of 0.34 is 85.2% below this industry median. Based on the distribution chart, P.C.S. Machine Group Holding PCL ranks #126 out of 1109 companies in the Vehicles & Parts industry, which is in the top quartile — a strong position relative to peers. Overall, P.C.S. Machine Group Holding PCL has a GF Score™ of 63/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does P.C.S. Machine Group Holding PCL's Debt-to-EBITDA compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, P.C.S. Machine Group Holding PCL ranks #126 out of 1109 companies for Debt-to-EBITDA. This places P.C.S. Machine Group Holding PCL in the top 11% of its industry — outperforming the majority of peers. The industry median Debt-to-EBITDA is 2.29. P.C.S. Machine Group Holding PCL's value of 0.34 is 85.2% below this benchmark. While the company's 10-year median is 0.20 vs. the industry median of 2.29, P.C.S. Machine Group Holding PCL has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for a Vehicles & Parts company?
The median Debt-to-EBITDA among Vehicles & Parts companies is 2.29, based on 1,109 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. P.C.S. Machine Group Holding PCL's current Debt-to-EBITDA of 0.34 is 85.2% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on P.C.S. Machine Group Holding PCL. For the Vehicles & Parts industry, the median Debt-to-EBITDA is 2.29 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. P.C.S. Machine Group Holding PCL's current Debt-to-EBITDA is 0.34, which is 70% above median its own 10-year median of 0.20. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is P.C.S. Machine Group Holding PCL stock overvalued right now?
Based on GuruFocus' analysis, P.C.S. Machine Group Holding PCL (BKK:PCSGH-R) is currently considered Fairly Valued. The stock's GF Value™ is ฿3.13, compared to a current price of ฿2.92 — trading 6.7% below its estimated fair value. The current Debt-to-EBITDA is 0.34, which is 70% above median its 10-year median of 0.20 and 85.2% below the Vehicles & Parts industry median of 2.29. P.C.S. Machine Group Holding PCL's overall GF Score™ is 63/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For P.C.S. Machine Group Holding PCL (BKK:PCSGH-R), the current Debt-to-EBITDA is 0.34 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is P.C.S. Machine Group Holding PCL (BKK:PCSGH-R) Overvalued in 2026?
Based on GuruFocus' analysis, P.C.S. Machine Group Holding PCL stock appears to be undervalued.
The current stock price of ฿2.92 is trading 6.7% below its estimated GF Value™ of ฿3.13.
GuruFocus considers P.C.S. Machine Group Holding PCL to be Fairly Valued.
Key valuation signals for BKK:PCSGH-R:
Debt-to-EBITDA: 0.34 (70% above median its 10-year median of 0.20)
GF Value™: ฿3.13 vs. price of ฿2.92 (6.7% below fair value)
Industry Position: 85.2% below the Vehicles & Parts median (#126 of 1109)
No single metric tells the full story. See the BKK:PCSGH-R stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
P.C.S. Machine Group Holding PCL is a Thailand-based auto parts manufacturer. It is engaged in the manufacture and sale of automotive parts. The group through its subsidiary manufactures engine parts, transmission parts, final drive parts such as camshaft, common rail, gear, and shaft. It also manufactures die casting parts like high-pressure die-casting, vacuum casting, and other aluminum machining parts through its die-casting subsidiary. The company has two reportable segments Asia segment and Europe segment. Majority of its revenue is generated from Asia segment.
63GF Score
Get the complete analysis for BKK:PCSGH-R
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BKK:PCSGH-R has been successfully added to your 
