Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Siam Steel International PCL's Debt-to-EBITDA or its related term are showing as below:
BKK:SIAM-R'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: -6113.39 Med: 2.42 Max: 14.86
Current: 1.38
During the past 13 years, the highest Debt-to-EBITDA Ratio of Siam Steel International PCL was 14.86. The lowest was -6113.39. And the median was 2.42.
BKK:SIAM-R's Debt-to-EBITDA is ranked better than 58.77% of 325
companies
in the Furnishings, Fixtures & Appliances industry
Industry Median: 1.81
vs BKK:SIAM-R: 1.38
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Siam Steel International PCL Debt-to-EBITDA Related Terms
Siam Steel International PCL Debt-to-EBITDA Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BKK:SIAM-R vs SN, SGI, MHK: Debt-to-EBITDA Comparison
For the Furnishings, Fixtures & Appliances subindustry, Siam Steel International PCL's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Siam Steel International PCL Debt-to-EBITDA vs Furnishings, Fixtures & Appliances Industry
For the Furnishings, Fixtures & Appliances industry and Consumer Cyclical sector, Siam Steel International PCL's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Siam Steel International PCL's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Jun. 2026) EBITDA data.
Siam Steel International PCL (BKK:SIAM-R) has a Debt-to-EBITDA of 1.39 as of Jun. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Siam Steel International PCL. This is 43% below median its historical median of 2.42. According to the industry distribution chart, Siam Steel International PCL ranks #134 out of 325 companies in the Furnishings, Fixtures & Appliances industry, placing it in the top 41.2%.
Is Siam Steel International PCL's Debt-to-EBITDA too high?
Siam Steel International PCL's current Debt-to-EBITDA of 1.39 is 43% below median its 10-year median of 2.42. The Furnishings, Fixtures & Appliances industry median Debt-to-EBITDA is 1.81. Siam Steel International PCL's value of 1.39 is 23.2% below this industry median. Based on the distribution chart, Siam Steel International PCL ranks #134 out of 325 companies in the Furnishings, Fixtures & Appliances industry, which is above the industry midpoint. Overall, Siam Steel International PCL has a GF Score™ of 40/100, reflecting its overall financial health beyond just this single metric.
How does Siam Steel International PCL's Debt-to-EBITDA compare to SN and SGI?
According to the Furnishings, Fixtures & Appliances industry distribution chart, Siam Steel International PCL ranks #134 out of 325 companies for Debt-to-EBITDA. This puts Siam Steel International PCL in the upper half of its industry. The industry median Debt-to-EBITDA is 1.81. Siam Steel International PCL's value of 1.39 is 23.2% below this benchmark. While the company's 10-year median is 2.42 vs. the industry median of 1.81, Siam Steel International PCL has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for a Furnishings, Fixtures & Appliances company?
The median Debt-to-EBITDA among Furnishings, Fixtures & Appliances companies is 1.81, based on 325 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Siam Steel International PCL's current Debt-to-EBITDA of 1.39 is 23.2% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Siam Steel International PCL. For the Furnishings, Fixtures & Appliances industry, the median Debt-to-EBITDA is 1.81 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Siam Steel International PCL's current Debt-to-EBITDA is 1.39, which is 43% below median its own 10-year median of 2.42. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Siam Steel International PCL stock overvalued right now?
Siam Steel International PCL (BKK:SIAM-R) has a current Debt-to-EBITDA of 1.39. The stock's GF Value™ is ฿0.67, compared to a current price of ฿0.98 — trading 46.3% above its estimated fair value. The current Debt-to-EBITDA is 1.39, which is 43% below median its 10-year median of 2.42 and 23.2% below the Furnishings, Fixtures & Appliances industry median of 1.81. Siam Steel International PCL's overall GF Score™ is 40/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Siam Steel International PCL (BKK:SIAM-R), the current Debt-to-EBITDA is 1.39 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Siam Steel International PCL (BKK:SIAM-R) Overvalued in 2026?
Based on GuruFocus' analysis, Siam Steel International PCL stock appears to be overvalued.
The current stock price of ฿0.98 is trading 46.3% above its estimated GF Value™ of ฿0.67.
Key valuation signals for BKK:SIAM-R:
Debt-to-EBITDA: 1.39 (43% below median its 10-year median of 2.42)
GF Value™: ฿0.67 vs. price of ฿0.98 (46.3% above fair value)
Industry Position: 23.2% below the Furnishings, Fixtures & Appliances median (#134 of 325)
No single metric tells the full story. See the BKK:SIAM-R stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Siam Steel International PCL is engaged in the manufacturing and sales of steel office equipment and furniture parts, construction services and alternative energy sector. The company manufactures and sells steel furniture under the brands LUCKY KINGDOM, OKAMURA, CHITOSE, and PILOT, and wooden furniture, including freestanding and built-in products, under the KINGDOM brand. It also provides interior design services for office and residential spaces, and manufactures and sells prefabricated buildings under the LUCKY Hi-Tech Building System brand. Its business segments are manufacturing and sales and of furniture, construction services and alternative energy sector. The majority of the company's revenue is generated from the Furniture segment. Geographically, it operates only in Thailand.
40GF Score
Get the complete analysis for BKK:SIAM-R
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BKK:SIAM-R has been successfully added to your 
