Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Mitsui High-tecMHTCF +17.08%72 Debt-to-EBITDA is 2.21 as of Jan. 2026, which is at its 10-year median of 2.21. GuruFocus rates MHTCF with a GF Score™ of 72/100 and a GF Value™ of $6.72 (Modestly Undervalued). The stock has 4 warning signs investors should review. Among 722 Semiconductors companies, Mitsui High-tec ranks worse than 71.88% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Mitsui High-tec's Debt-to-EBITDA or its related term are showing as below:
MHTCF'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 0.71 Med: 2.21 Max: 4.62
Current: 3.55
During the past 13 years, the highest Debt-to-EBITDA Ratio of Mitsui High-tec was 4.62. The lowest was 0.71. And the median was 2.21.
MHTCF's Debt-to-EBITDA is ranked worse than 71.88% of 722
companies
in the Semiconductors industry
Industry Median: 1.445
vs MHTCF: 3.55
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Mitsui High-tec Debt-to-EBITDA Related Terms
Mitsui High-tec Debt-to-EBITDA Historical Data
* Premium members only.
The historical data trend for Mitsui High-tec's Debt-to-EBITDA can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
MHTCF vs NVDA, AVGO, MU: Debt-to-EBITDA Comparison
For the Semiconductors subindustry, Mitsui High-tec's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Mitsui High-tec Debt-to-EBITDA vs Semiconductors Industry
For the Semiconductors industry and Technology sector, Mitsui High-tec's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Mitsui High-tec's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Jan. 2026) EBITDA data.
Mitsui High-tec (MHTCF) has a Debt-to-EBITDA of 2.21 as of Jan. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Mitsui High-tec. This is near median its historical median of 2.21. Over the past decade, Mitsui High-tec's Debt-to-EBITDA has ranged from 0.71 to 4.62. According to the industry distribution chart, Mitsui High-tec ranks #519 out of 722 companies in the Semiconductors industry, placing it in the top 71.9%.
Is Mitsui High-tec's Debt-to-EBITDA too high?
Mitsui High-tec's current Debt-to-EBITDA of 2.21 is near median its 10-year median of 2.21. Over the past 10 years, this metric has ranged from a low of 0.71 to a high of 4.62. The Semiconductors industry median Debt-to-EBITDA is 1.45. Mitsui High-tec's value of 2.21 is 52.9% above this industry median. Based on the distribution chart, Mitsui High-tec ranks #519 out of 722 companies in the Semiconductors industry, which is below the industry midpoint. Overall, Mitsui High-tec has a GF Score™ of 72/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Mitsui High-tec's Debt-to-EBITDA compare to NVDA and AVGO?
According to the Semiconductors industry distribution chart, Mitsui High-tec ranks #519 out of 722 companies for Debt-to-EBITDA. This places Mitsui High-tec in the lower half of its industry. The industry median Debt-to-EBITDA is 1.45. Mitsui High-tec's value of 2.21 is 52.9% above this benchmark. Historically, Mitsui High-tec's own Debt-to-EBITDA has ranged from 0.71 to 4.62 over the past decade. While the company's 10-year median is 2.21 vs. the industry median of 1.45, Mitsui High-tec has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for a Semiconductors company?
The median Debt-to-EBITDA among Semiconductors companies is 1.45, based on 722 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Mitsui High-tec's current Debt-to-EBITDA of 2.21 is 52.9% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Mitsui High-tec. For the Semiconductors industry, the median Debt-to-EBITDA is 1.45 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Mitsui High-tec's current Debt-to-EBITDA is 2.21, which is near median its own 10-year median of 2.21. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Mitsui High-tec stock overvalued right now?
Based on GuruFocus' analysis, Mitsui High-tec (MHTCF) is currently considered Modestly Undervalued. The stock's GF Value™ is $6.72, compared to a current price of $5.62 — trading 16.4% below its estimated fair value. The current Debt-to-EBITDA is 2.21, which is near median its 10-year median of 2.21 and 52.9% above the Semiconductors industry median of 1.45. Mitsui High-tec's overall GF Score™ is 72/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Mitsui High-tec (MHTCF), the current Debt-to-EBITDA is 2.21 as of Jan. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Mitsui High-tec (MHTCF) Overvalued in 2026?
Based on GuruFocus' analysis, Mitsui High-tec stock appears to be undervalued.
The current stock price of $5.62 is trading 16.4% below its estimated GF Value™ of $6.72.
GuruFocus considers Mitsui High-tec to be Modestly Undervalued.
Key valuation signals for MHTCF:
Debt-to-EBITDA: 2.21 (near median its 10-year median of 2.21)
GF Value™: $6.72 vs. price of $5.62 (16.4% below fair value)
Industry Position: 52.9% above the Semiconductors median (#519 of 722)
No single metric tells the full story. See the MHTCF stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Mitsui High-tec Inc manufactures and sells lead frame, motor core, precision tooling and machine tools in Japan. Its precision tooling/precision parts products include motor core dies, lead frame dies, mold dies, trim and form dies, and other type of stamping tools used in motor cores and IC lead frames, electric motor cores, automobile components, coins, and resin injection molding. It also provides open lead frames for semiconductor packages; and motor parts.
72GF Score
Get the complete analysis for MHTCF
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
MHTCF has been successfully added to your 
