Mitsui High-tecMHTCF +17.08%72 PEG Ratio is 0.81 as of Jun. 24, 2026, which is 170% above its 10-year median of 0.30. GuruFocus rates MHTCF with a GF Score™ of 72/100 and a GF Value™ of $6.60 (Modestly Undervalued). The stock has 9 warning signs investors should review. Among 329 Semiconductors companies, Mitsui High-tec ranks better than 83.59% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Mitsui High-tec's PEG Ratio or its related term are showing as below:
MHTCF'
s PEG Ratio Range Over the Past 10 Years
Min: 0.09 Med: 0.3 Max: 1.19
Current: 1.12
During the past 13 years, Mitsui High-tec's highest PEG Ratio was 1.19. The lowest was 0.09. And the median was 0.30.
MHTCF's PEG Ratio is ranked better than 83.59% of 329
companies
in the Semiconductors industry
Industry Median: 3.81
vs MHTCF: 1.12
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Mitsui High-tec (OTCPK:MHTCF) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Mitsui High-tec PEG Ratio Related Terms
Mitsui High-tec PEG Ratio Historical Data
* Premium members only.
The historical data trend for Mitsui High-tec's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Semiconductors subindustry, Mitsui High-tec's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Mitsui High-tec PEG Ratio vs Semiconductors Industry
For the Semiconductors industry and Technology sector, Mitsui High-tec's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Mitsui High-tec's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Mitsui High-tec (MHTCF) has a PEG Ratio of 0.81 as of Jun. 24, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Mitsui High-tec and its competitors. This is 170% above median its historical median of 0.30. Over the past decade, Mitsui High-tec's PEG Ratio has ranged from 0.09 to 1.19. According to the industry distribution chart, Mitsui High-tec ranks #54 out of 329 companies in the Semiconductors industry, placing it in the top 16.4%.
Is Mitsui High-tec's PEG Ratio too high?
Mitsui High-tec's current PEG Ratio of 0.81 is 170% above median its 10-year median of 0.30. Over the past 10 years, this metric has ranged from a low of 0.09 to a high of 1.19. The Semiconductors industry median PEG Ratio is 3.81. Mitsui High-tec's value of 0.81 is 78.7% below this industry median. Based on the distribution chart, Mitsui High-tec ranks #54 out of 329 companies in the Semiconductors industry, which is in the top quartile — a strong position relative to peers. Overall, Mitsui High-tec has a GF Score™ of 72/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Mitsui High-tec's PEG Ratio compare to NVDA and AVGO?
According to the Semiconductors industry distribution chart, Mitsui High-tec ranks #54 out of 329 companies for PEG Ratio. This places Mitsui High-tec in the top 16% of its industry — outperforming the majority of peers. The industry median PEG Ratio is 3.81. Mitsui High-tec's value of 0.81 is 78.7% below this benchmark. Historically, Mitsui High-tec's own PEG Ratio has ranged from 0.09 to 1.19 over the past decade. While the company's 10-year median is 0.30 vs. the industry median of 3.81, Mitsui High-tec has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Semiconductors company?
The median PEG Ratio among Semiconductors companies is 3.81, based on 329 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Mitsui High-tec's current PEG Ratio of 0.81 is 78.7% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Mitsui High-tec and its competitors. For the Semiconductors industry, the median PEG Ratio is 3.81 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Mitsui High-tec's current PEG Ratio is 0.81, which is 170% above median its own 10-year median of 0.30. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Mitsui High-tec stock overvalued right now?
Based on GuruFocus' analysis, Mitsui High-tec (MHTCF) is currently considered Modestly Undervalued. The stock's GF Value™ is $6.60, compared to a current price of $5.62 — trading 14.8% below its estimated fair value. The current PEG Ratio is 0.81, which is 170% above median its 10-year median of 0.30 and 78.7% below the Semiconductors industry median of 3.81. Mitsui High-tec's overall GF Score™ is 72/100 with 9 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Mitsui High-tec (MHTCF), the current PEG Ratio is 0.81 as of Jun. 24, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Mitsui High-tec (MHTCF) Overvalued in 2026?
Based on GuruFocus' analysis, Mitsui High-tec stock appears to be undervalued.
The current stock price of $5.62 is trading 14.8% below its estimated GF Value™ of $6.60.
GuruFocus considers Mitsui High-tec to be Modestly Undervalued.
Key valuation signals for MHTCF:
PEG Ratio: 0.81 (170% above median its 10-year median of 0.30)
GF Value™: $6.60 vs. price of $5.62 (14.8% below fair value)
Industry Position: 78.7% below the Semiconductors median (#54 of 329)
No single metric tells the full story. See the MHTCF stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Mitsui High-tec Inc manufactures and sells lead frame, motor core, precision tooling and machine tools in Japan. Its precision tooling/precision parts products include motor core dies, lead frame dies, mold dies, trim and form dies, and other type of stamping tools used in motor cores and IC lead frames, electric motor cores, automobile components, coins, and resin injection molding. It also provides open lead frames for semiconductor packages; and motor parts.
72GF Score
Get the complete analysis for MHTCF
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
MHTCF has been successfully added to your 
