Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Ador Welding's Debt-to-EBITDA or its related term are showing as below:
NSE:ADOR'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 0.02 Med: 0.63 Max: 8.29
Current: 0.02
During the past 13 years, the highest Debt-to-EBITDA Ratio of Ador Welding was 8.29. The lowest was 0.02. And the median was 0.63.
NSE:ADOR's Debt-to-EBITDA is ranked better than 97.77% of 2332
companies
in the Industrial Products industry
Industry Median: 1.7
vs NSE:ADOR: 0.02
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Ador Welding Debt-to-EBITDA Related Terms
Ador Welding Debt-to-EBITDA Historical Data
* Premium members only.
The historical data trend for Ador Welding's Debt-to-EBITDA can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:ADOR vs GEV, ETN, PH: Debt-to-EBITDA Comparison
For the Specialty Industrial Machinery subindustry, Ador Welding's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Ador Welding Debt-to-EBITDA vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Ador Welding's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Ador Welding's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Jun. 2026) EBITDA data.
Ador Welding (NSE:ADOR) has a Debt-to-EBITDA of 0.00 as of Jun. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Ador Welding. Over the past decade, Ador Welding's Debt-to-EBITDA has ranged from 0.02 to 8.29. According to the industry distribution chart, Ador Welding ranks #52 out of 2332 companies in the Industrial Products industry, placing it in the top 2.2%.
Is Ador Welding's Debt-to-EBITDA too high?
Ador Welding's current Debt-to-EBITDA is 0.00. Over the past 10 years, this metric has ranged from a low of 0.02 to a high of 8.29. Based on the distribution chart, Ador Welding ranks #52 out of 2332 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Ador Welding has a GF Score™ of 77/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Ador Welding's Debt-to-EBITDA compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Ador Welding ranks #52 out of 2332 companies for Debt-to-EBITDA. This places Ador Welding in the top 2% of its industry — outperforming the majority of peers. The industry median Debt-to-EBITDA is 1.70. Historically, Ador Welding's own Debt-to-EBITDA has ranged from 0.02 to 8.29 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for an Industrial Products company?
The median Debt-to-EBITDA among Industrial Products companies is 1.70, based on 2,332 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Ador Welding. For the Industrial Products industry, the median Debt-to-EBITDA is 1.70 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Ador Welding's current Debt-to-EBITDA is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Ador Welding stock overvalued right now?
Based on GuruFocus' analysis, Ador Welding (NSE:ADOR) is currently considered Modestly Overvalued. The stock's GF Value™ is ₹1,183.75, compared to a current price of ₹1,510.80 — trading 27.6% above its estimated fair value. The current Debt-to-EBITDA is 0.00. Ador Welding's overall GF Score™ is 77/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Ador Welding (NSE:ADOR), the current Debt-to-EBITDA is 0.00 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Ador Welding (NSE:ADOR) Overvalued in 2026?
Based on GuruFocus' analysis, Ador Welding stock appears to be overvalued.
The current stock price of ₹1,510.80 is trading 27.6% above its estimated GF Value™ of ₹1,183.75.
GuruFocus considers Ador Welding to be Modestly Overvalued.
Key valuation signals for NSE:ADOR:
Debt-to-EBITDA: 0.00
GF Value™: ₹1,183.75 vs. price of ₹1,510.80 (27.6% above fair value)
No single metric tells the full story. See the NSE:ADOR stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Ador Welding Ltd is a welding and cutting solution provider offering welding consumables, and equipment, automation solutions, and skill development. The strategic business units are welding electrodes, wires, and fluxes, welding and cutting equipment, gas cutting, PPE and accessories and CNC machines, project engineering solutions, and welding automation. The Company has three reportable business segments: i) Products ii) Services; and iii) Maintenance & Reclamation (M&R). Geographically, the company generates a majority of its revenue within India and the rest from other markets.
77GF Score
Get the complete analysis for NSE:ADOR
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:ADOR has been successfully added to your 
