Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Ador WeldingNSE:ADOR -1.94%78 EBITDA Margin % is 13.81% as of Jun. 2026, which is 36% above its 10-year median of 10.15. GuruFocus rates NSE:ADOR with a GF Score™ of 78/100 and a GF Value™ of ₹1,179.65 (Modestly Overvalued). The stock has 4 warning signs investors should review. Among 3,035 Industrial Products companies, Ador Welding ranks better than 71.2% on this metric.
EBITDA Margin % is calculated as EBITDA divided by its Revenue. Ador Welding's EBITDA for the
three
months ended in Jun. 2026 was ₹427 Mil. Ador Welding's Revenue for the
three
months ended in Jun. 2026 was ₹3,095 Mil. Therefore, Ador Welding's EBITDA margin for the quarter that ended in Jun. 2026 was 13.81%.
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Ador Welding EBITDA Margin % Related Terms
Ador Welding EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Ador Welding's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:ADOR vs GEV, ETN, PH: EBITDA Margin % Comparison
For the Specialty Industrial Machinery subindustry, Ador Welding's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Ador Welding EBITDA Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Ador Welding's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Ador Welding's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Ador Welding (NSE:ADOR) has a EBITDA Margin % of 13.81% as of Jun. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Ador Welding and its competitors. This is 36% above median its historical median of 10.15. Over the past decade, Ador Welding's EBITDA Margin % has ranged from 0.79 to 14.93. According to the industry distribution chart, Ador Welding ranks #874 out of 3035 companies in the Industrial Products industry, placing it in the top 28.8%.
Is Ador Welding's EBITDA Margin % too high?
Ador Welding's current EBITDA Margin % of 13.81% is 36% above median its 10-year median of 10.15. Over the past 10 years, this metric has ranged from a low of 0.79 to a high of 14.93. The Industrial Products industry median EBITDA Margin % is 9.46. Ador Welding's value of 13.81% is 46% above this industry median. Based on the distribution chart, Ador Welding ranks #874 out of 3035 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Ador Welding has a GF Score™ of 78/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Ador Welding's EBITDA Margin % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Ador Welding ranks #874 out of 3035 companies for EBITDA Margin %. This puts Ador Welding in the upper half of its industry. The industry median EBITDA Margin % is 9.46. Ador Welding's value of 13.81% is 46% above this benchmark. Historically, Ador Welding's own EBITDA Margin % has ranged from 0.79 to 14.93 over the past decade. While the company's 10-year median is 10.15 vs. the industry median of 9.46, Ador Welding has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for an Industrial Products company?
The median EBITDA Margin % among Industrial Products companies is 9.46, based on 3,035 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Ador Welding's current EBITDA Margin % of 13.81% is 46% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Ador Welding and its competitors. For the Industrial Products industry, the median EBITDA Margin % is 9.46 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Ador Welding's current EBITDA Margin % is 13.81%, which is 36% above median its own 10-year median of 10.15. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Ador Welding stock overvalued right now?
Based on GuruFocus' analysis, Ador Welding (NSE:ADOR) is currently considered Modestly Overvalued. The stock's GF Value™ is ₹1,179.65, compared to a current price of ₹1,477.90 — trading 25.3% above its estimated fair value. The current EBITDA Margin % is 13.81%, which is 36% above median its 10-year median of 10.15 and 46% above the Industrial Products industry median of 9.46. Ador Welding's overall GF Score™ is 78/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Ador Welding (NSE:ADOR), the current EBITDA Margin % is 13.81% as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Ador Welding (NSE:ADOR) Overvalued in 2026?
Based on GuruFocus' analysis, Ador Welding stock appears to be overvalued.
The current stock price of ₹1,477.90 is trading 25.3% above its estimated GF Value™ of ₹1,179.65.
GuruFocus considers Ador Welding to be Modestly Overvalued.
Key valuation signals for NSE:ADOR:
EBITDA Margin %: 13.81% (36% above median its 10-year median of 10.15)
GF Value™: ₹1,179.65 vs. price of ₹1,477.90 (25.3% above fair value)
Industry Position: 46% above the Industrial Products median (#874 of 3035)
No single metric tells the full story. See the NSE:ADOR stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Ador Welding Ltd is a welding and cutting solution provider offering welding consumables, and equipment, automation solutions, and skill development. The strategic business units are welding electrodes, wires, and fluxes, welding and cutting equipment, gas cutting, PPE and accessories and CNC machines, project engineering solutions, and welding automation. The Company has three reportable business segments: i) Products ii) Services; and iii) Maintenance & Reclamation (M&R). Geographically, the company generates a majority of its revenue within India and the rest from other markets.
78GF Score
Get the complete analysis for NSE:ADOR
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:ADOR has been successfully added to your 
