Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Automotive Stampings & Assemblies's Debt-to-EBITDA or its related term are showing as below:
NSE:ASAL'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: -733.8 Med: 2.32 Max: 12.38
Current: 2.11
During the past 13 years, the highest Debt-to-EBITDA Ratio of Automotive Stampings & Assemblies was 12.38. The lowest was -733.80. And the median was 2.32.
NSE:ASAL's Debt-to-EBITDA is ranked better than 52.61% of 1093
companies
in the Vehicles & Parts industry
Industry Median: 2.25
vs NSE:ASAL: 2.11
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Automotive Stampings & Assemblies Debt-to-EBITDA Related Terms
Automotive Stampings & Assemblies Debt-to-EBITDA Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Auto Parts subindustry, Automotive Stampings & Assemblies's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Automotive Stampings & Assemblies Debt-to-EBITDA vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Automotive Stampings & Assemblies's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Automotive Stampings & Assemblies's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Mar. 2026) EBITDA data.
Automotive Stampings & Assemblies (NSE:ASAL) has a Debt-to-EBITDA of 1.66 as of Mar. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Automotive Stampings & Assemblies. This is 28% below median its historical median of 2.32. According to the industry distribution chart, Automotive Stampings & Assemblies ranks #518 out of 1093 companies in the Vehicles & Parts industry, placing it in the top 47.4%.
Is Automotive Stampings & Assemblies' Debt-to-EBITDA too high?
Automotive Stampings & Assemblies' current Debt-to-EBITDA of 1.66 is 28% below median its 10-year median of 2.32. The Vehicles & Parts industry median Debt-to-EBITDA is 2.25. Automotive Stampings & Assemblies' value of 1.66 is 26.2% below this industry median. Based on the distribution chart, Automotive Stampings & Assemblies ranks #518 out of 1093 companies in the Vehicles & Parts industry, which is above the industry midpoint. Overall, Automotive Stampings & Assemblies has a GF Score™ of 70/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Automotive Stampings & Assemblies' Debt-to-EBITDA compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Automotive Stampings & Assemblies ranks #518 out of 1093 companies for Debt-to-EBITDA. This puts Automotive Stampings & Assemblies in the upper half of its industry. The industry median Debt-to-EBITDA is 2.25. Automotive Stampings & Assemblies' value of 1.66 is 26.2% below this benchmark. While the company's 10-year median is 2.32 vs. the industry median of 2.25, Automotive Stampings & Assemblies has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for a Vehicles & Parts company?
The median Debt-to-EBITDA among Vehicles & Parts companies is 2.25, based on 1,093 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Automotive Stampings & Assemblies's current Debt-to-EBITDA of 1.66 is 26.2% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Automotive Stampings & Assemblies. For the Vehicles & Parts industry, the median Debt-to-EBITDA is 2.25 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Automotive Stampings & Assemblies's current Debt-to-EBITDA is 1.66, which is 28% below median its own 10-year median of 2.32. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Automotive Stampings & Assemblies stock overvalued right now?
Based on GuruFocus' analysis, Automotive Stampings & Assemblies (NSE:ASAL) is currently considered Fairly Valued. The stock's GF Value™ is ₹571.82, compared to a current price of ₹551.55 — trading 3.5% below its estimated fair value. The current Debt-to-EBITDA is 1.66, which is 28% below median its 10-year median of 2.32 and 26.2% below the Vehicles & Parts industry median of 2.25. Automotive Stampings & Assemblies' overall GF Score™ is 70/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Automotive Stampings & Assemblies (NSE:ASAL), the current Debt-to-EBITDA is 1.66 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Automotive Stampings & Assemblies (NSE:ASAL) Overvalued in 2026?
Based on GuruFocus' analysis, Automotive Stampings & Assemblies stock appears to be undervalued.
The current stock price of ₹551.55 is trading 3.5% below its estimated GF Value™ of ₹571.82.
GuruFocus considers Automotive Stampings & Assemblies to be Fairly Valued.
Key valuation signals for NSE:ASAL:
Debt-to-EBITDA: 1.66 (28% below median its 10-year median of 2.32)
GF Value™: ₹571.82 vs. price of ₹551.55 (3.5% below fair value)
Industry Position: 26.2% below the Vehicles & Parts median (#518 of 1093)
No single metric tells the full story. See the NSE:ASAL stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Automotive Stampings & Assemblies Business Description
Automotive Stampings & Assemblies Ltd manufactures and supplies sheet metal components, welded assemblies, and modules for automobiles. The company operates only in the Automobile Component Segment in the Domestic Market. Geographically, the majority of its revenue comes from Components.
70GF Score
Get the complete analysis for NSE:ASAL
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:ASAL has been successfully added to your 
