NSE:ASAL'
s Quick Ratio Range Over the Past 10 Years
Min: 0.21 Med: 0.33 Max: 0.56
Current: 0.56
During the past 13 years, Automotive Stampings & Assemblies's highest Quick Ratio was 0.56. The lowest was 0.21. And the median was 0.33.
NSE:ASAL's Quick Ratio is ranked worse than 83.99% of 1337
companies
in the Vehicles & Parts industry
Industry Median: 1.06
vs NSE:ASAL: 0.56
Automotive Stampings & Assemblies (NSE:ASAL) Quick Ratio Explanation
The quick ratio is more conservative than the Current Ratio because it excludes inventories from current assets. The ratio derives its name presumably from the fact that assets such as cash and marketable securities are quick sources of cash. Inventories generally take time to be converted into cash, and if they have to be sold quickly, the company may have to accept a lower price than book value of these inventories. As a result, they are justifiably excluded from assets that are ready sources of immediate cash.
In general, low or decreasing quick ratios generally suggest that a company is over-leveraged, struggling to maintain or grow sales, paying bills too quickly or collecting receivables too slowly. On the other hand, a high or increasing quick ratio generally indicates that a company is experiencing solid top-line growth, quickly converting receivables into cash, and easily able to cover its financial obligations. Such companies often have faster inventory turnover and cash conversion cycles.
The higher the quick ratio, the better the company's liquidity position.
Automotive Stampings & Assemblies Quick Ratio Related Terms
Automotive Stampings & Assemblies Quick Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Automotive Stampings & Assemblies Quick Ratio Chart
For the Auto Parts subindustry, Automotive Stampings & Assemblies's Quick Ratio, along with its competitors' market caps and Quick Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Automotive Stampings & Assemblies Quick Ratio vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Automotive Stampings & Assemblies's Quick Ratio distribution charts can be found below:
* The bar in red indicates where Automotive Stampings & Assemblies's Quick Ratio falls into.
Automotive Stampings & Assemblies Quick Ratio Calculation
The quick ratio measures a company's ability to meet its short-term obligations with its most liquid assets. For this reason, the ratio excludes inventories from current assets.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Automotive Stampings & Assemblies (NSE:ASAL) has a Quick Ratio of 0.56 as of Mar. 2026. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Automotive Stampings & Assemblies and its competitors. This is 70% above median its historical median of 0.33. Over the past decade, Automotive Stampings & Assemblies' Quick Ratio has ranged from 0.21 to 0.56. According to the industry distribution chart, Automotive Stampings & Assemblies ranks #1123 out of 1337 companies in the Vehicles & Parts industry, placing it in the top 84%.
Is Automotive Stampings & Assemblies' Quick Ratio too high?
Automotive Stampings & Assemblies' current Quick Ratio of 0.56 is 70% above median its 10-year median of 0.33. Over the past 10 years, this metric has ranged from a low of 0.21 to a high of 0.56. The Vehicles & Parts industry median Quick Ratio is 1.06. Automotive Stampings & Assemblies' value of 0.56 is 47.2% below this industry median. Based on the distribution chart, Automotive Stampings & Assemblies ranks #1123 out of 1337 companies in the Vehicles & Parts industry, which is in the bottom quartile relative to peers. Overall, Automotive Stampings & Assemblies has a GF Score™ of 70/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Automotive Stampings & Assemblies' Quick Ratio compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Automotive Stampings & Assemblies ranks #1123 out of 1337 companies for Quick Ratio. This places Automotive Stampings & Assemblies in the lower half of its industry. The industry median Quick Ratio is 1.06. Automotive Stampings & Assemblies' value of 0.56 is 47.2% below this benchmark. Historically, Automotive Stampings & Assemblies' own Quick Ratio has ranged from 0.21 to 0.56 over the past decade. While the company's 10-year median is 0.33 vs. the industry median of 1.06, Automotive Stampings & Assemblies has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Quick Ratio for a Vehicles & Parts company?
The median Quick Ratio among Vehicles & Parts companies is 1.06, based on 1,337 companies in the industry. Companies in the top quartile (top 25%) have a Quick Ratio significantly above this median, while those in the bottom quartile fall well below. However, Quick Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Automotive Stampings & Assemblies's current Quick Ratio of 0.56 is 47.2% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Quick Ratio mean?
A high Quick Ratio can signal that a stock is expensive relative to its fundamentals. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Automotive Stampings & Assemblies and its competitors. For the Vehicles & Parts industry, the median Quick Ratio is 1.06 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Automotive Stampings & Assemblies's current Quick Ratio is 0.56, which is 70% above median its own 10-year median of 0.33. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Automotive Stampings & Assemblies stock overvalued right now?
Based on GuruFocus' analysis, Automotive Stampings & Assemblies (NSE:ASAL) is currently considered Fairly Valued. The stock's GF Value™ is ₹571.10, compared to a current price of ₹519.05 — trading 9.1% below its estimated fair value. The current Quick Ratio is 0.56, which is 70% above median its 10-year median of 0.33 and 47.2% below the Vehicles & Parts industry median of 1.06. Automotive Stampings & Assemblies' overall GF Score™ is 70/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Quick Ratio calculated?
Quick Ratio is calculated from a company's financial statements. For Automotive Stampings & Assemblies (NSE:ASAL), the current Quick Ratio is 0.56 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Automotive Stampings & Assemblies (NSE:ASAL) Overvalued in 2026?
Based on GuruFocus' analysis, Automotive Stampings & Assemblies stock appears to be undervalued.
The current stock price of ₹519.05 is trading 9.1% below its estimated GF Value™ of ₹571.10.
GuruFocus considers Automotive Stampings & Assemblies to be Fairly Valued.
Key valuation signals for NSE:ASAL:
Quick Ratio: 0.56 (70% above median its 10-year median of 0.33)
GF Value™: ₹571.10 vs. price of ₹519.05 (9.1% below fair value)
Industry Position: 47.2% below the Vehicles & Parts median (#1123 of 1337)
No single metric tells the full story. See the NSE:ASAL stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Automotive Stampings & Assemblies Business Description
Automotive Stampings & Assemblies Ltd manufactures and supplies sheet metal components, welded assemblies, and modules for automobiles. The company operates only in the Automobile Component Segment in the Domestic Market. Geographically, the majority of its revenue comes from Components.
70GF Score
Get the complete analysis for NSE:ASAL
Quick Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:ASAL has been successfully added to your 
