Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
XAC AutomationROCO:5490 -0.52%67 Debt-to-EBITDA is 0.07 as of Jun. 2026, which is 42% below its 10-year median of 0.12. GuruFocus rates ROCO:5490 with a GF Score™ of 67/100 and a GF Value™ of NT$35.36 (Modestly Undervalued). The stock has 2 warning signs investors should review. Among 2,348 Industrial Products companies, XAC Automation ranks better than 91.82% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for XAC Automation's Debt-to-EBITDA or its related term are showing as below:
ROCO:5490'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: -0.33 Med: 0.12 Max: 0.52
Current: 0.08
During the past 13 years, the highest Debt-to-EBITDA Ratio of XAC Automation was 0.52. The lowest was -0.33. And the median was 0.12.
ROCO:5490's Debt-to-EBITDA is ranked better than 91.82% of 2348
companies
in the Industrial Products industry
Industry Median: 1.68
vs ROCO:5490: 0.08
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
XAC Automation Debt-to-EBITDA Related Terms
XAC Automation Debt-to-EBITDA Historical Data
* Premium members only.
The historical data trend for XAC Automation's Debt-to-EBITDA can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Business Equipment & Supplies subindustry, XAC Automation's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
XAC Automation Debt-to-EBITDA vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, XAC Automation's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where XAC Automation's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Jun. 2026) EBITDA data.
XAC Automation (ROCO:5490) has a Debt-to-EBITDA of 0.07 as of Jun. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on XAC Automation. This is 42% below median its historical median of 0.12. According to the industry distribution chart, XAC Automation ranks #192 out of 2348 companies in the Industrial Products industry, placing it in the top 8.2%.
Is XAC Automation's Debt-to-EBITDA too high?
XAC Automation's current Debt-to-EBITDA of 0.07 is 42% below median its 10-year median of 0.12. The Industrial Products industry median Debt-to-EBITDA is 1.68. XAC Automation's value of 0.07 is 95.8% below this industry median. Based on the distribution chart, XAC Automation ranks #192 out of 2348 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, XAC Automation has a GF Score™ of 67/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does XAC Automation's Debt-to-EBITDA compare to competitors?
According to the Industrial Products industry distribution chart, XAC Automation ranks #192 out of 2348 companies for Debt-to-EBITDA. This places XAC Automation in the top 8% of its industry — outperforming the majority of peers. The industry median Debt-to-EBITDA is 1.68. XAC Automation's value of 0.07 is 95.8% below this benchmark. While the company's 10-year median is 0.12 vs. the industry median of 1.68, XAC Automation has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for an Industrial Products company?
The median Debt-to-EBITDA among Industrial Products companies is 1.68, based on 2,348 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. XAC Automation's current Debt-to-EBITDA of 0.07 is 95.8% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on XAC Automation. For the Industrial Products industry, the median Debt-to-EBITDA is 1.68 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. XAC Automation's current Debt-to-EBITDA is 0.07, which is 42% below median its own 10-year median of 0.12. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is XAC Automation stock overvalued right now?
Based on GuruFocus' analysis, XAC Automation (ROCO:5490) is currently considered Modestly Undervalued. The stock's GF Value™ is NT$35.36, compared to a current price of NT$28.90 — trading 18.3% below its estimated fair value. The current Debt-to-EBITDA is 0.07, which is 42% below median its 10-year median of 0.12 and 95.8% below the Industrial Products industry median of 1.68. XAC Automation's overall GF Score™ is 67/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For XAC Automation (ROCO:5490), the current Debt-to-EBITDA is 0.07 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is XAC Automation (ROCO:5490) Overvalued in 2026?
Based on GuruFocus' analysis, XAC Automation stock appears to be undervalued.
The current stock price of NT$28.90 is trading 18.3% below its estimated GF Value™ of NT$35.36.
GuruFocus considers XAC Automation to be Modestly Undervalued.
Key valuation signals for ROCO:5490:
Debt-to-EBITDA: 0.07 (42% below median its 10-year median of 0.12)
GF Value™: NT$35.36 vs. price of NT$28.90 (18.3% below fair value)
Industry Position: 95.8% below the Industrial Products median (#192 of 2348)
No single metric tells the full story. See the ROCO:5490 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
XAC Automation Corp is a research and development, and manufacturing company. The company focuses on delivering commerce-specific solutions to the payment industry. The company researches, develops, produces, manufactures, and sale of electronic financial transaction terminals and their components, transaction data security protection equipment and their components, and multi-function smart cards, card readers and writers, and their components. Its key products include integrated POS for ECR, POS, and customer-facing devices, integrated POS for handheld and desktop use cases, for unattended outdoor payment modules, and others.
67GF Score
Get the complete analysis for ROCO:5490
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:5490 has been successfully added to your 
