Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Shuang-Bang Industrial's Debt-to-EBITDA or its related term are showing as below:
ROCO:6506'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 1.47 Med: 3.46 Max: 12.04
Current: 2.87
During the past 13 years, the highest Debt-to-EBITDA Ratio of Shuang-Bang Industrial was 12.04. The lowest was 1.47. And the median was 3.46.
ROCO:6506's Debt-to-EBITDA is ranked worse than 60.52% of 1264
companies
in the Chemicals industry
Industry Median: 1.97
vs ROCO:6506: 2.87
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Shuang-Bang Industrial Debt-to-EBITDA Related Terms
Shuang-Bang Industrial Debt-to-EBITDA Historical Data
* Premium members only.
The historical data trend for Shuang-Bang Industrial's Debt-to-EBITDA can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ROCO:6506 vs LIN, SHW, ECL: Debt-to-EBITDA Comparison
For the Specialty Chemicals subindustry, Shuang-Bang Industrial's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Shuang-Bang Industrial Debt-to-EBITDA vs Chemicals Industry
For the Chemicals industry and Basic Materials sector, Shuang-Bang Industrial's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Shuang-Bang Industrial's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Jun. 2026) EBITDA data.
Shuang-Bang Industrial (ROCO:6506) has a Debt-to-EBITDA of 2.43 as of Jun. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Shuang-Bang Industrial. This is 30% below median its historical median of 3.46. Over the past decade, Shuang-Bang Industrial's Debt-to-EBITDA has ranged from 1.47 to 12.04. According to the industry distribution chart, Shuang-Bang Industrial ranks #765 out of 1264 companies in the Chemicals industry, placing it in the top 60.5%.
Is Shuang-Bang Industrial's Debt-to-EBITDA too high?
Shuang-Bang Industrial's current Debt-to-EBITDA of 2.43 is 30% below median its 10-year median of 3.46. Over the past 10 years, this metric has ranged from a low of 1.47 to a high of 12.04. The Chemicals industry median Debt-to-EBITDA is 1.97. Shuang-Bang Industrial's value of 2.43 is 23.4% above this industry median. Based on the distribution chart, Shuang-Bang Industrial ranks #765 out of 1264 companies in the Chemicals industry, which is below the industry midpoint. Overall, Shuang-Bang Industrial has a GF Score™ of 75/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Shuang-Bang Industrial's Debt-to-EBITDA compare to LIN and SHW?
According to the Chemicals industry distribution chart, Shuang-Bang Industrial ranks #765 out of 1264 companies for Debt-to-EBITDA. This places Shuang-Bang Industrial in the lower half of its industry. The industry median Debt-to-EBITDA is 1.97. Shuang-Bang Industrial's value of 2.43 is 23.4% above this benchmark. Historically, Shuang-Bang Industrial's own Debt-to-EBITDA has ranged from 1.47 to 12.04 over the past decade. While the company's 10-year median is 3.46 vs. the industry median of 1.97, Shuang-Bang Industrial has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for a Chemicals company?
The median Debt-to-EBITDA among Chemicals companies is 1.97, based on 1,264 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Shuang-Bang Industrial's current Debt-to-EBITDA of 2.43 is 23.4% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Shuang-Bang Industrial. For the Chemicals industry, the median Debt-to-EBITDA is 1.97 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Shuang-Bang Industrial's current Debt-to-EBITDA is 2.43, which is 30% below median its own 10-year median of 3.46. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Shuang-Bang Industrial stock overvalued right now?
Based on GuruFocus' analysis, Shuang-Bang Industrial (ROCO:6506) is currently considered Fairly Valued. The stock's GF Value™ is NT$18.61, compared to a current price of NT$17.90 — trading 3.8% below its estimated fair value. The current Debt-to-EBITDA is 2.43, which is 30% below median its 10-year median of 3.46 and 23.4% above the Chemicals industry median of 1.97. Shuang-Bang Industrial's overall GF Score™ is 75/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Shuang-Bang Industrial (ROCO:6506), the current Debt-to-EBITDA is 2.43 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Shuang-Bang Industrial (ROCO:6506) Overvalued in 2026?
Based on GuruFocus' analysis, Shuang-Bang Industrial stock appears to be undervalued.
The current stock price of NT$17.90 is trading 3.8% below its estimated GF Value™ of NT$18.61.
GuruFocus considers Shuang-Bang Industrial to be Fairly Valued.
Key valuation signals for ROCO:6506:
Debt-to-EBITDA: 2.43 (30% below median its 10-year median of 3.46)
GF Value™: NT$18.61 vs. price of NT$17.90 (3.8% below fair value)
Industry Position: 23.4% above the Chemicals median (#765 of 1264)
No single metric tells the full story. See the ROCO:6506 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Shuang-Bang Industrial Corp is engaged in the manufacturing of PU resin for shoes, coating and lamination, hardener, and Thermoplastic Polyurethane (TPU) and the sales of photoinitiators. The group has four segments, including coating and lamination, polymer, TPU, and sports. It generates the majority of its revenue from the coating and lamination segment engaged in manufacturing. The TPU segment is engaged in manufacturing of PU resin for shoes, coating and lamination, hardener, and Thermoplastic Polyurethane (TPU) and sales of photo initiators.
75GF Score
Get the complete analysis for ROCO:6506
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:6506 has been successfully added to your 
