Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Martas Precision Slide CoROCO:6705 77 Debt-to-EBITDA is 1.14 as of Dec. 2025, which is 63% below its 10-year median of 3.07. GuruFocus rates ROCO:6705 with a GF Score™ of 77/100 and a GF Value™ of NT$58.52 (Significantly Overvalued). The stock has 6 warning signs investors should review. Among 2,348 Industrial Products companies, Martas Precision Slide Co ranks better than 53.66% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Martas Precision Slide Co's Debt-to-EBITDA or its related term are showing as below:
ROCO:6705'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 1.43 Med: 3.07 Max: 9.11
Current: 1.43
During the past 11 years, the highest Debt-to-EBITDA Ratio of Martas Precision Slide Co was 9.11. The lowest was 1.43. And the median was 3.07.
ROCO:6705's Debt-to-EBITDA is ranked better than 53.66% of 2348
companies
in the Industrial Products industry
Industry Median: 1.68
vs ROCO:6705: 1.43
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Martas Precision Slide Co Debt-to-EBITDA Related Terms
Martas Precision Slide Co Debt-to-EBITDA Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ROCO:6705 vs SNA, RBC, SWK: Debt-to-EBITDA Comparison
For the Tools & Accessories subindustry, Martas Precision Slide Co's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Martas Precision Slide Co Debt-to-EBITDA vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Martas Precision Slide Co's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Martas Precision Slide Co's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is two times the quarterly (Dec. 2025) EBITDA data.
Martas Precision Slide Co (ROCO:6705) has a Debt-to-EBITDA of 1.14 as of Dec. 2025. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Martas Precision Slide Co. This is 63% below median its historical median of 3.07. Over the past decade, Martas Precision Slide Co's Debt-to-EBITDA has ranged from 1.43 to 9.11. According to the industry distribution chart, Martas Precision Slide Co ranks #1088 out of 2348 companies in the Industrial Products industry, placing it in the top 46.3%.
Is Martas Precision Slide Co's Debt-to-EBITDA too high?
Martas Precision Slide Co's current Debt-to-EBITDA of 1.14 is 63% below median its 10-year median of 3.07. Over the past 10 years, this metric has ranged from a low of 1.43 to a high of 9.11. The Industrial Products industry median Debt-to-EBITDA is 1.68. Martas Precision Slide Co's value of 1.14 is 32.1% below this industry median. Based on the distribution chart, Martas Precision Slide Co ranks #1088 out of 2348 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Martas Precision Slide Co has a GF Score™ of 77/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Martas Precision Slide Co's Debt-to-EBITDA compare to SNA and RBC?
According to the Industrial Products industry distribution chart, Martas Precision Slide Co ranks #1088 out of 2348 companies for Debt-to-EBITDA. This puts Martas Precision Slide Co in the upper half of its industry. The industry median Debt-to-EBITDA is 1.68. Martas Precision Slide Co's value of 1.14 is 32.1% below this benchmark. Historically, Martas Precision Slide Co's own Debt-to-EBITDA has ranged from 1.43 to 9.11 over the past decade. While the company's 10-year median is 3.07 vs. the industry median of 1.68, Martas Precision Slide Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for an Industrial Products company?
The median Debt-to-EBITDA among Industrial Products companies is 1.68, based on 2,348 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Martas Precision Slide Co's current Debt-to-EBITDA of 1.14 is 32.1% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Martas Precision Slide Co. For the Industrial Products industry, the median Debt-to-EBITDA is 1.68 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Martas Precision Slide Co's current Debt-to-EBITDA is 1.14, which is 63% below median its own 10-year median of 3.07. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Martas Precision Slide Co stock overvalued right now?
Based on GuruFocus' analysis, Martas Precision Slide Co (ROCO:6705) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$58.52, compared to a current price of NT$108.00 — trading 84.6% above its estimated fair value. The current Debt-to-EBITDA is 1.14, which is 63% below median its 10-year median of 3.07 and 32.1% below the Industrial Products industry median of 1.68. Martas Precision Slide Co's overall GF Score™ is 77/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Martas Precision Slide Co (ROCO:6705), the current Debt-to-EBITDA is 1.14 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Martas Precision Slide Co (ROCO:6705) Overvalued in 2026?
Based on GuruFocus' analysis, Martas Precision Slide Co stock appears to be overvalued.
The current stock price of NT$108.00 is trading 84.6% above its estimated GF Value™ of NT$58.52.
GuruFocus considers Martas Precision Slide Co to be Significantly Overvalued.
Key valuation signals for ROCO:6705:
Debt-to-EBITDA: 1.14 (63% below median its 10-year median of 3.07)
GF Value™: NT$58.52 vs. price of NT$108.00 (84.6% above fair value)
Industry Position: 32.1% below the Industrial Products median (#1088 of 2348)
No single metric tells the full story. See the ROCO:6705 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Martas Precision Slide Co Ltd specializes in ball-bearing slides. It is a manufacturer in mainland China and are pioneer of roll-forming machine technology. Its products are used in industrial, residential, kitchen, office, and various other places.
77GF Score
Get the complete analysis for ROCO:6705
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:6705 has been successfully added to your 
