Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Asia Metal IndustriesROCO:6727 -1.64%72 Debt-to-EBITDA is 0.25 as of Jun. 2026, which is 81% below its 10-year median of 1.35. GuruFocus rates ROCO:6727 with a GF Score™ of 72/100 and a GF Value™ of NT$145.85 (Significantly Overvalued). The stock has 6 warning signs investors should review. Among 2,313 Industrial Products companies, Asia Metal Industries ranks better than 83.05% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Asia Metal Industries's Debt-to-EBITDA or its related term are showing as below:
ROCO:6727'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 0.28 Med: 1.35 Max: 3.39
Current: 0.28
During the past 10 years, the highest Debt-to-EBITDA Ratio of Asia Metal Industries was 3.39. The lowest was 0.28. And the median was 1.35.
ROCO:6727's Debt-to-EBITDA is ranked better than 83.05% of 2313
companies
in the Industrial Products industry
Industry Median: 1.69
vs ROCO:6727: 0.28
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Asia Metal Industries Debt-to-EBITDA Related Terms
Asia Metal Industries Debt-to-EBITDA Historical Data
* Premium members only.
The historical data trend for Asia Metal Industries's Debt-to-EBITDA can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ROCO:6727 vs GEV, ETN, PH: Debt-to-EBITDA Comparison
For the Specialty Industrial Machinery subindustry, Asia Metal Industries's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Asia Metal Industries Debt-to-EBITDA vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Asia Metal Industries's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Asia Metal Industries's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Jun. 2026) EBITDA data.
Asia Metal Industries (ROCO:6727) has a Debt-to-EBITDA of 0.25 as of Jun. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Asia Metal Industries. This is 81% below median its historical median of 1.35. Over the past decade, Asia Metal Industries' Debt-to-EBITDA has ranged from 0.28 to 3.39. According to the industry distribution chart, Asia Metal Industries ranks #392 out of 2313 companies in the Industrial Products industry, placing it in the top 16.9%.
Is Asia Metal Industries' Debt-to-EBITDA too high?
Asia Metal Industries' current Debt-to-EBITDA of 0.25 is 81% below median its 10-year median of 1.35. Over the past 10 years, this metric has ranged from a low of 0.28 to a high of 3.39. The Industrial Products industry median Debt-to-EBITDA is 1.69. Asia Metal Industries' value of 0.25 is 85.2% below this industry median. Based on the distribution chart, Asia Metal Industries ranks #392 out of 2313 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Asia Metal Industries has a GF Score™ of 72/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Asia Metal Industries' Debt-to-EBITDA compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Asia Metal Industries ranks #392 out of 2313 companies for Debt-to-EBITDA. This places Asia Metal Industries in the top 17% of its industry — outperforming the majority of peers. The industry median Debt-to-EBITDA is 1.69. Asia Metal Industries' value of 0.25 is 85.2% below this benchmark. Historically, Asia Metal Industries' own Debt-to-EBITDA has ranged from 0.28 to 3.39 over the past decade. While the company's 10-year median is 1.35 vs. the industry median of 1.69, Asia Metal Industries has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for an Industrial Products company?
The median Debt-to-EBITDA among Industrial Products companies is 1.69, based on 2,313 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Asia Metal Industries's current Debt-to-EBITDA of 0.25 is 85.2% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Asia Metal Industries. For the Industrial Products industry, the median Debt-to-EBITDA is 1.69 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Asia Metal Industries's current Debt-to-EBITDA is 0.25, which is 81% below median its own 10-year median of 1.35. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Asia Metal Industries stock overvalued right now?
Based on GuruFocus' analysis, Asia Metal Industries (ROCO:6727) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$145.85, compared to a current price of NT$541.00 — trading 270.9% above its estimated fair value. The current Debt-to-EBITDA is 0.25, which is 81% below median its 10-year median of 1.35 and 85.2% below the Industrial Products industry median of 1.69. Asia Metal Industries' overall GF Score™ is 72/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Asia Metal Industries (ROCO:6727), the current Debt-to-EBITDA is 0.25 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Asia Metal Industries (ROCO:6727) Overvalued in 2026?
Based on GuruFocus' analysis, Asia Metal Industries stock appears to be overvalued.
The current stock price of NT$541.00 is trading 270.9% above its estimated GF Value™ of NT$145.85.
GuruFocus considers Asia Metal Industries to be Significantly Overvalued.
Key valuation signals for ROCO:6727:
Debt-to-EBITDA: 0.25 (81% below median its 10-year median of 1.35)
GF Value™: NT$145.85 vs. price of NT$541.00 (270.9% above fair value)
Industry Position: 85.2% below the Industrial Products median (#392 of 2313)
No single metric tells the full story. See the ROCO:6727 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Asia Metal Industries Inc is a Taiwan-based company. Its main business is the design, manufacture, processing and trading of various metal machinery and parts; design, manufacturing, processing and trading of various molds; various tanks and related pipeline projects; design, manufacture, processing, maintenance and trading of automated machinery and equipment and parts; the design, manufacture, processing and trading of precision testing instruments and parts, as well as the import and export trading of the preceding products.
72GF Score
Get the complete analysis for ROCO:6727
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:6727 has been successfully added to your 
