Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Asia Metal IndustriesROCO:6727 -9.93%66 PEG Ratio is 7.84 as of Jul. 18, 2026, which is 50% below its 10-year median of 15.74. GuruFocus rates ROCO:6727 with a GF Score™ of 66/100 and a GF Value™ of NT$79.50 (Significantly Overvalued). The stock has 3 warning signs investors should review. Among 1,276 Industrial Products companies, Asia Metal Industries ranks worse than 87.15% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Asia Metal Industries's PEG Ratio or its related term are showing as below:
ROCO:6727'
s PEG Ratio Range Over the Past 10 Years
Min: 0.53 Med: 15.74 Max: 119.73
Current: 7.84
During the past 10 years, Asia Metal Industries's highest PEG Ratio was 119.73. The lowest was 0.53. And the median was 15.74.
ROCO:6727's PEG Ratio is ranked worse than 87.15% of 1276
companies
in the Industrial Products industry
Industry Median: 1.785
vs ROCO:6727: 7.84
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Asia Metal Industries (ROCO:6727) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Asia Metal Industries's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Asia Metal Industries PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Asia Metal Industries's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Asia Metal Industries's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Asia Metal Industries (ROCO:6727) has a PEG Ratio of 7.84 as of Jul. 18, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Asia Metal Industries and its competitors. This is 50% below median its historical median of 15.74. Over the past decade, Asia Metal Industries' PEG Ratio has ranged from 0.53 to 119.73. According to the industry distribution chart, Asia Metal Industries ranks #1112 out of 1276 companies in the Industrial Products industry, placing it in the top 87.1%.
Is Asia Metal Industries' PEG Ratio too high?
Asia Metal Industries' current PEG Ratio of 7.84 is 50% below median its 10-year median of 15.74. Over the past 10 years, this metric has ranged from a low of 0.53 to a high of 119.73. The Industrial Products industry median PEG Ratio is 1.79. Asia Metal Industries' value of 7.84 is 339.2% above this industry median. Based on the distribution chart, Asia Metal Industries ranks #1112 out of 1276 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Asia Metal Industries has a GF Score™ of 66/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Asia Metal Industries' PEG Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Asia Metal Industries ranks #1112 out of 1276 companies for PEG Ratio. This places Asia Metal Industries in the lower half of its industry. The industry median PEG Ratio is 1.79. Asia Metal Industries' value of 7.84 is 339.2% above this benchmark. Historically, Asia Metal Industries' own PEG Ratio has ranged from 0.53 to 119.73 over the past decade. While the company's 10-year median is 15.74 vs. the industry median of 1.79, Asia Metal Industries has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.79, based on 1,276 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Asia Metal Industries's current PEG Ratio of 7.84 is 339.2% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Asia Metal Industries and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.79 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Asia Metal Industries's current PEG Ratio is 7.84, which is 50% below median its own 10-year median of 15.74. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Asia Metal Industries stock overvalued right now?
Based on GuruFocus' analysis, Asia Metal Industries (ROCO:6727) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$79.50, compared to a current price of NT$367.50 — trading 362.3% above its estimated fair value. The current PEG Ratio is 7.84, which is 50% below median its 10-year median of 15.74 and 339.2% above the Industrial Products industry median of 1.79. Asia Metal Industries' overall GF Score™ is 66/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Asia Metal Industries (ROCO:6727), the current PEG Ratio is 7.84 as of Jul. 18, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Asia Metal Industries (ROCO:6727) Overvalued in 2026?
Based on GuruFocus' analysis, Asia Metal Industries stock appears to be overvalued.
The current stock price of NT$367.50 is trading 362.3% above its estimated GF Value™ of NT$79.50.
GuruFocus considers Asia Metal Industries to be Significantly Overvalued.
Key valuation signals for ROCO:6727:
PEG Ratio: 7.84 (50% below median its 10-year median of 15.74)
GF Value™: NT$79.50 vs. price of NT$367.50 (362.3% above fair value)
Industry Position: 339.2% above the Industrial Products median (#1112 of 1276)
No single metric tells the full story. See the ROCO:6727 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Asia Metal Industries Inc is a Taiwan-based company. Its main business is the design, manufacture, processing and trading of various metal machinery and parts; design, manufacturing, processing and trading of various molds; various tanks and related pipeline projects; design, manufacture, processing, maintenance and trading of automated machinery and equipment and parts; the design, manufacture, processing and trading of precision testing instruments and parts, as well as the import and export trading of the preceding products.
66GF Score
Get the complete analysis for ROCO:6727
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:6727 has been successfully added to your 
