Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
SHSE:688012'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: -2.02 Med: 0.3 Max: 5.12
Current: 0.26
During the past 10 years, the highest Debt-to-EBITDA Ratio of Advanced Micro-fabrication Equipment was 5.12. The lowest was -2.02. And the median was 0.30.
SHSE:688012's Debt-to-EBITDA is ranked better than 77.56% of 731
companies
in the Semiconductors industry
Industry Median: 1.47
vs SHSE:688012: 0.26
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Advanced Micro-fabrication Equipment Debt-to-EBITDA Related Terms
Advanced Micro-fabrication Equipment Debt-to-EBITDA Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
SHSE:688012 vs AMAT, LRCX, KLAC: Debt-to-EBITDA Comparison
For the Semiconductor Equipment & Materials subindustry, Advanced Micro-fabrication Equipment's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Advanced Micro-fabrication Equipment Debt-to-EBITDA vs Semiconductors Industry
For the Semiconductors industry and Technology sector, Advanced Micro-fabrication Equipment's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Advanced Micro-fabrication Equipment's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Mar. 2026) EBITDA data.
Advanced Micro-fabrication Equipment (SHSE:688012) has a Debt-to-EBITDA of 0.19 as of Mar. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Advanced Micro-fabrication Equipment. This is 37% below median its historical median of 0.30. According to the industry distribution chart, Advanced Micro-fabrication Equipment ranks #164 out of 731 companies in the Semiconductors industry, placing it in the top 22.4%.
Is Advanced Micro-fabrication Equipment's Debt-to-EBITDA too high?
Advanced Micro-fabrication Equipment's current Debt-to-EBITDA of 0.19 is 37% below median its 10-year median of 0.30. The Semiconductors industry median Debt-to-EBITDA is 1.47. Advanced Micro-fabrication Equipment's value of 0.19 is 87.1% below this industry median. Based on the distribution chart, Advanced Micro-fabrication Equipment ranks #164 out of 731 companies in the Semiconductors industry, which is in the top quartile — a strong position relative to peers. Overall, Advanced Micro-fabrication Equipment has a GF Score™ of 82/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Advanced Micro-fabrication Equipment's Debt-to-EBITDA compare to AMAT and LRCX?
According to the Semiconductors industry distribution chart, Advanced Micro-fabrication Equipment ranks #164 out of 731 companies for Debt-to-EBITDA. This places Advanced Micro-fabrication Equipment in the top 22% of its industry — outperforming the majority of peers. The industry median Debt-to-EBITDA is 1.47. Advanced Micro-fabrication Equipment's value of 0.19 is 87.1% below this benchmark. While the company's 10-year median is 0.30 vs. the industry median of 1.47, Advanced Micro-fabrication Equipment has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for a Semiconductors company?
The median Debt-to-EBITDA among Semiconductors companies is 1.47, based on 731 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Advanced Micro-fabrication Equipment's current Debt-to-EBITDA of 0.19 is 87.1% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Advanced Micro-fabrication Equipment. For the Semiconductors industry, the median Debt-to-EBITDA is 1.47 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Advanced Micro-fabrication Equipment's current Debt-to-EBITDA is 0.19, which is 37% below median its own 10-year median of 0.30. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Advanced Micro-fabrication Equipment stock overvalued right now?
Based on GuruFocus' analysis, Advanced Micro-fabrication Equipment (SHSE:688012) is currently considered Significantly Overvalued. The stock's GF Value™ is ¥222.82, compared to a current price of ¥380.90 — trading 70.9% above its estimated fair value. The current Debt-to-EBITDA is 0.19, which is 37% below median its 10-year median of 0.30 and 87.1% below the Semiconductors industry median of 1.47. Advanced Micro-fabrication Equipment's overall GF Score™ is 82/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Advanced Micro-fabrication Equipment (SHSE:688012), the current Debt-to-EBITDA is 0.19 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Advanced Micro-fabrication Equipment (SHSE:688012) Overvalued in 2026?
Based on GuruFocus' analysis, Advanced Micro-fabrication Equipment stock appears to be overvalued.
The current stock price of ¥380.90 is trading 70.9% above its estimated GF Value™ of ¥222.82.
GuruFocus considers Advanced Micro-fabrication Equipment to be Significantly Overvalued.
Key valuation signals for SHSE:688012:
Debt-to-EBITDA: 0.19 (37% below median its 10-year median of 0.30)
GF Value™: ¥222.82 vs. price of ¥380.90 (70.9% above fair value)
Industry Position: 87.1% below the Semiconductors median (#164 of 731)
No single metric tells the full story. See the SHSE:688012 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Advanced Micro-fabrication Equipment Inc is engaged in the development, production, and sales of equipment such as plasma etching equipment, deep silicon etching equipment, and metal organic chemical vapor deposition (MOCVD) equipment for microelectronic devices such as integrated circuits and LED chips.
82GF Score
Get the complete analysis for SHSE:688012
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:688012 has been successfully added to your 
