Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
SHSE:688012'
s EV-to-EBITDA Range Over the Past 10 Years
Min: 30.28 Med: 70.27 Max: 597.13
Current: 79.15
During the past 10 years, the highest EV-to-EBITDA of Advanced Micro-fabrication Equipment was 597.13. The lowest was 30.28. And the median was 70.27.
SHSE:688012's EV-to-EBITDA is ranked worse than 83.31% of 773
companies
in the Semiconductors industry
Industry Median: 21.13
vs SHSE:688012: 79.15
EV-to-EBITDA is a valuation multiple used in finance and investment to measure the value of a company. This important multiple is often used in conjunction with, or as an alternative to, the PE Ratio to determine the fair market value of a company.
EV-to-EBITDA is a valuation multiple used in finance and investment to measure the value of a company. This important multiple is often used in conjunction with, or as an alternative to, the PE Ratio (TTM) to determine the fair market value of a company.
Advanced Micro-fabrication Equipment's PE Ratio (TTM) for today is calculated as:
Advanced Micro-fabrication Equipment's share price for today is ¥362.50.
Advanced Micro-fabrication Equipment's Earnings per Share (Diluted) for the trailing twelve months (TTM) ended in Jun. 2026 adds up the quarterly data reported by the company within the most recent 12 months, which was ¥4.495.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Study has found that the companies with the lowest EV-to-EBITDA outperforms companies measured as cheap by other ratios such as PE Ratio (TTM).
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
SHSE:688012 vs AMAT, LRCX, KLAC: EV-to-EBITDA Comparison
For the Semiconductor Equipment & Materials subindustry, Advanced Micro-fabrication Equipment's EV-to-EBITDA, along with its competitors' market caps and EV-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Advanced Micro-fabrication Equipment EV-to-EBITDA vs Semiconductors Industry
For the Semiconductors industry and Technology sector, Advanced Micro-fabrication Equipment's EV-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Advanced Micro-fabrication Equipment's EV-to-EBITDA falls into.
Advanced Micro-fabrication Equipment's current Enterprise Value is ¥345,691 Mil.
Advanced Micro-fabrication Equipment's EBITDA for the trailing twelve months (TTM) ended in Jun. 2026 adds up the quarterly data reported by the company within the most recent 12 months, which was ¥4,368 Mil.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Advanced Micro-fabrication Equipment (SHSE:688012) has a EV-to-EBITDA of 79.15 as of Aug. 21, 2026. EV to EBITDA ratio is the company's enterprise value divided by earnings before interest, taxes, depreciation and amortization. View historical data on Advanced Micro-fabrication Equipment. This is 13% above median its historical median of 70.27. Over the past decade, Advanced Micro-fabrication Equipment's EV-to-EBITDA has ranged from 30.28 to 597.13. According to the industry distribution chart, Advanced Micro-fabrication Equipment ranks #644 out of 773 companies in the Semiconductors industry, placing it in the top 83.3%.
Is Advanced Micro-fabrication Equipment's EV-to-EBITDA too high?
Advanced Micro-fabrication Equipment's current EV-to-EBITDA of 79.15 is 13% above median its 10-year median of 70.27. Over the past 10 years, this metric has ranged from a low of 30.28 to a high of 597.13. The Semiconductors industry median EV-to-EBITDA is 21.13. Advanced Micro-fabrication Equipment's value of 79.15 is 274.6% above this industry median. Based on the distribution chart, Advanced Micro-fabrication Equipment ranks #644 out of 773 companies in the Semiconductors industry, which is in the bottom quartile relative to peers. Overall, Advanced Micro-fabrication Equipment has a GF Score™ of 82/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Advanced Micro-fabrication Equipment's EV-to-EBITDA compare to AMAT and LRCX?
According to the Semiconductors industry distribution chart, Advanced Micro-fabrication Equipment ranks #644 out of 773 companies for EV-to-EBITDA. This places Advanced Micro-fabrication Equipment in the lower half of its industry. The industry median EV-to-EBITDA is 21.13. Advanced Micro-fabrication Equipment's value of 79.15 is 274.6% above this benchmark. Historically, Advanced Micro-fabrication Equipment's own EV-to-EBITDA has ranged from 30.28 to 597.13 over the past decade. While the company's 10-year median is 70.27 vs. the industry median of 21.13, Advanced Micro-fabrication Equipment has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EV-to-EBITDA for a Semiconductors company?
The median EV-to-EBITDA among Semiconductors companies is 21.13, based on 773 companies in the industry. Companies in the top quartile (top 25%) have a EV-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, EV-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Advanced Micro-fabrication Equipment's current EV-to-EBITDA of 79.15 is 274.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EV-to-EBITDA mean?
A high EV-to-EBITDA can signal that a stock is expensive relative to its fundamentals. EV to EBITDA ratio is the company's enterprise value divided by earnings before interest, taxes, depreciation and amortization. View historical data on Advanced Micro-fabrication Equipment. For the Semiconductors industry, the median EV-to-EBITDA is 21.13 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Advanced Micro-fabrication Equipment's current EV-to-EBITDA is 79.15, which is 13% above median its own 10-year median of 70.27. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Advanced Micro-fabrication Equipment stock overvalued right now?
Based on GuruFocus' analysis, Advanced Micro-fabrication Equipment (SHSE:688012) is currently considered Modestly Overvalued. The stock's GF Value™ is ¥286.38, compared to a current price of ¥362.50 — trading 26.6% above its estimated fair value. The current EV-to-EBITDA is 79.15, which is 13% above median its 10-year median of 70.27 and 274.6% above the Semiconductors industry median of 21.13. Advanced Micro-fabrication Equipment's overall GF Score™ is 82/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EV-to-EBITDA calculated?
EV-to-EBITDA is calculated from a company's financial statements. For Advanced Micro-fabrication Equipment (SHSE:688012), the current EV-to-EBITDA is 79.15 as of Aug. 21, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Advanced Micro-fabrication Equipment (SHSE:688012) Overvalued in 2026?
Based on GuruFocus' analysis, Advanced Micro-fabrication Equipment stock appears to be overvalued.
The current stock price of ¥362.50 is trading 26.6% above its estimated GF Value™ of ¥286.38.
GuruFocus considers Advanced Micro-fabrication Equipment to be Modestly Overvalued.
Key valuation signals for SHSE:688012:
EV-to-EBITDA: 79.15 (13% above median its 10-year median of 70.27)
GF Value™: ¥286.38 vs. price of ¥362.50 (26.6% above fair value)
Industry Position: 274.6% above the Semiconductors median (#644 of 773)
No single metric tells the full story. See the SHSE:688012 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Advanced Micro-fabrication Equipment Inc is engaged in the development, production, and sales of equipment such as plasma etching equipment, deep silicon etching equipment, and metal organic chemical vapor deposition (MOCVD) equipment for microelectronic devices such as integrated circuits and LED chips.
82GF Score
Get the complete analysis for SHSE:688012
EV-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:688012 has been successfully added to your 
