Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Mirle Automation CoTPE:2464 +1.97%55 Debt-to-EBITDA is 3.00 as of Jun. 2026, which is 4% below its 10-year median of 3.11. GuruFocus rates TPE:2464 with a GF Score™ of 55/100 and a GF Value™ of NT$64.14 (Significantly Overvalued). The stock has 9 warning signs investors should review. Among 2,335 Industrial Products companies, Mirle Automation Co ranks worse than 83.77% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Mirle Automation Co's Debt-to-EBITDA or its related term are showing as below:
TPE:2464'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 0.64 Med: 3.11 Max: 858.77
Current: 6.2
During the past 13 years, the highest Debt-to-EBITDA Ratio of Mirle Automation Co was 858.77. The lowest was 0.64. And the median was 3.11.
TPE:2464's Debt-to-EBITDA is ranked worse than 83.77% of 2335
companies
in the Industrial Products industry
Industry Median: 1.66
vs TPE:2464: 6.20
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Mirle Automation Co Debt-to-EBITDA Related Terms
Mirle Automation Co Debt-to-EBITDA Historical Data
* Premium members only.
The historical data trend for Mirle Automation Co's Debt-to-EBITDA can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TPE:2464 vs GEV, ETN, PH: Debt-to-EBITDA Comparison
For the Specialty Industrial Machinery subindustry, Mirle Automation Co's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Mirle Automation Co Debt-to-EBITDA vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Mirle Automation Co's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Mirle Automation Co's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Jun. 2026) EBITDA data.
Mirle Automation Co (TPE:2464) has a Debt-to-EBITDA of 3.00 as of Jun. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Mirle Automation Co. This is near median its historical median of 3.11. Over the past decade, Mirle Automation Co's Debt-to-EBITDA has ranged from 0.64 to 858.77. According to the industry distribution chart, Mirle Automation Co ranks #1956 out of 2335 companies in the Industrial Products industry, placing it in the top 83.8%.
Is Mirle Automation Co's Debt-to-EBITDA too high?
Mirle Automation Co's current Debt-to-EBITDA of 3.00 is near median its 10-year median of 3.11. Over the past 10 years, this metric has ranged from a low of 0.64 to a high of 858.77. The Industrial Products industry median Debt-to-EBITDA is 1.66. Mirle Automation Co's value of 3.00 is 80.7% above this industry median. Based on the distribution chart, Mirle Automation Co ranks #1956 out of 2335 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Mirle Automation Co has a GF Score™ of 55/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Mirle Automation Co's Debt-to-EBITDA compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Mirle Automation Co ranks #1956 out of 2335 companies for Debt-to-EBITDA. This places Mirle Automation Co in the lower half of its industry. The industry median Debt-to-EBITDA is 1.66. Mirle Automation Co's value of 3.00 is 80.7% above this benchmark. Historically, Mirle Automation Co's own Debt-to-EBITDA has ranged from 0.64 to 858.77 over the past decade. While the company's 10-year median is 3.11 vs. the industry median of 1.66, Mirle Automation Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for an Industrial Products company?
The median Debt-to-EBITDA among Industrial Products companies is 1.66, based on 2,335 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Mirle Automation Co's current Debt-to-EBITDA of 3.00 is 80.7% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Mirle Automation Co. For the Industrial Products industry, the median Debt-to-EBITDA is 1.66 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Mirle Automation Co's current Debt-to-EBITDA is 3.00, which is near median its own 10-year median of 3.11. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Mirle Automation Co stock overvalued right now?
Based on GuruFocus' analysis, Mirle Automation Co (TPE:2464) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$64.14, compared to a current price of NT$181.50 — trading 183% above its estimated fair value. The current Debt-to-EBITDA is 3.00, which is near median its 10-year median of 3.11 and 80.7% above the Industrial Products industry median of 1.66. Mirle Automation Co's overall GF Score™ is 55/100 with 9 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Mirle Automation Co (TPE:2464), the current Debt-to-EBITDA is 3.00 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Mirle Automation Co (TPE:2464) Overvalued in 2026?
Based on GuruFocus' analysis, Mirle Automation Co stock appears to be overvalued.
The current stock price of NT$181.50 is trading 183% above its estimated GF Value™ of NT$64.14.
GuruFocus considers Mirle Automation Co to be Significantly Overvalued.
Key valuation signals for TPE:2464:
Debt-to-EBITDA: 3.00 (near median its 10-year median of 3.11)
GF Value™: NT$64.14 vs. price of NT$181.50 (183% above fair value)
Industry Position: 80.7% above the Industrial Products median (#1956 of 2335)
No single metric tells the full story. See the TPE:2464 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Mirle Automation Co Ltd is engaged in automation system integrators and related product manufacturing. It is mainly engaged in the business of automation equipment systems and their components, various parking facilities, medical equipment, and the design, development, production, and sale of automation equipment used in these products, and also provides after-sales services for the products. It is also engaged in the leasing business and develops and sells software and databases. Its segments are the intelligent automation system and equipment, which derive key revenue, and the digital technology products and industrial controllers. Geographically, it derives key revenue from Taiwan. Product-wise, it generates the majority of its revenue from Semiconductor automation systems.
55GF Score
Get the complete analysis for TPE:2464
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:2464 has been successfully added to your 
