Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Jentech Precision Industrial Co's Debt-to-EBITDA or its related term are showing as below:
TPE:3653'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 0 Med: 0.41 Max: 1.52
Current: 0.01
During the past 13 years, the highest Debt-to-EBITDA Ratio of Jentech Precision Industrial Co was 1.52. The lowest was 0.00. And the median was 0.41.
TPE:3653's Debt-to-EBITDA is ranked better than 99.94% of 1794
companies
in the Hardware industry
Industry Median: 1.69
vs TPE:3653: 0.01
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Jentech Precision Industrial Co Debt-to-EBITDA Related Terms
Jentech Precision Industrial Co Debt-to-EBITDA Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Jentech Precision Industrial Co Debt-to-EBITDA Chart
TPE:3653 vs APH, GLW, TEL: Debt-to-EBITDA Comparison
For the Electronic Components subindustry, Jentech Precision Industrial Co's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Jentech Precision Industrial Co Debt-to-EBITDA vs Hardware Industry
For the Hardware industry and Technology sector, Jentech Precision Industrial Co's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Jentech Precision Industrial Co's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Mar. 2026) EBITDA data.
Jentech Precision Industrial Co (TPE:3653) has a Debt-to-EBITDA of 0.01 as of Mar. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Jentech Precision Industrial Co. This is 98% below median its historical median of 0.41. According to the industry distribution chart, Jentech Precision Industrial Co ranks #1 out of 1794 companies in the Hardware industry, placing it in the top 0.099999999999994%.
Is Jentech Precision Industrial Co's Debt-to-EBITDA too high?
Jentech Precision Industrial Co's current Debt-to-EBITDA of 0.01 is 98% below median its 10-year median of 0.41. The Hardware industry median Debt-to-EBITDA is 1.69. Jentech Precision Industrial Co's value of 0.01 is 99.4% below this industry median. Based on the distribution chart, Jentech Precision Industrial Co ranks #1 out of 1794 companies in the Hardware industry, which is in the top quartile — a strong position relative to peers. Overall, Jentech Precision Industrial Co has a GF Score™ of 79/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Jentech Precision Industrial Co's Debt-to-EBITDA compare to APH and GLW?
According to the Hardware industry distribution chart, Jentech Precision Industrial Co ranks #1 out of 1794 companies for Debt-to-EBITDA. This places Jentech Precision Industrial Co in the top 0% of its industry — outperforming the majority of peers. The industry median Debt-to-EBITDA is 1.69. Jentech Precision Industrial Co's value of 0.01 is 99.4% below this benchmark. While the company's 10-year median is 0.41 vs. the industry median of 1.69, Jentech Precision Industrial Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for a Hardware company?
The median Debt-to-EBITDA among Hardware companies is 1.69, based on 1,794 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Jentech Precision Industrial Co's current Debt-to-EBITDA of 0.01 is 99.4% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Jentech Precision Industrial Co. For the Hardware industry, the median Debt-to-EBITDA is 1.69 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Jentech Precision Industrial Co's current Debt-to-EBITDA is 0.01, which is 98% below median its own 10-year median of 0.41. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Jentech Precision Industrial Co stock overvalued right now?
Based on GuruFocus' analysis, Jentech Precision Industrial Co (TPE:3653) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$2,190.52, compared to a current price of NT$4,635.00 — trading 111.6% above its estimated fair value. The current Debt-to-EBITDA is 0.01, which is 98% below median its 10-year median of 0.41 and 99.4% below the Hardware industry median of 1.69. Jentech Precision Industrial Co's overall GF Score™ is 79/100. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Jentech Precision Industrial Co (TPE:3653), the current Debt-to-EBITDA is 0.01 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Jentech Precision Industrial Co (TPE:3653) Overvalued in 2026?
Based on GuruFocus' analysis, Jentech Precision Industrial Co stock appears to be overvalued.
The current stock price of NT$4,635.00 is trading 111.6% above its estimated GF Value™ of NT$2,190.52.
GuruFocus considers Jentech Precision Industrial Co to be Significantly Overvalued.
Key valuation signals for TPE:3653:
Debt-to-EBITDA: 0.01 (98% below median its 10-year median of 0.41)
GF Value™: NT$2,190.52 vs. price of NT$4,635.00 (111.6% above fair value)
Industry Position: 99.4% below the Hardware median (#1 of 1794)
No single metric tells the full story. See the TPE:3653 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Jentech Precision Industrial Co Ltd is engaged in manufacturing and processing of precision toolings and trading of their materials; manufacturing, processing and trading of metal components of electrical appliances, electronics, and computers; manufacturing, processing and trading of hardware machinery and its components; metal forging and processing of surface treatment. The companies reportable operating segments are semiconductor business group and others. The majority of the revenue is earn from semiconductor business group.
79GF Score
Get the complete analysis for TPE:3653
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:3653 has been successfully added to your 
