Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Lemtech Holdings CoTPE:4912 -0.56%81 Debt-to-EBITDA is 1.92 as of Mar. 2026, which is 34% below its 10-year median of 2.90. GuruFocus rates TPE:4912 with a GF Score™ of 81/100 and a GF Value™ of NT$129.33 (Significantly Undervalued). The stock has 3 warning signs investors should review. Among 2,348 Industrial Products companies, Lemtech Holdings Co ranks worse than 59.11% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Lemtech Holdings Co's Debt-to-EBITDA or its related term are showing as below:
TPE:4912'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 1.57 Med: 2.9 Max: 3.44
Current: 2.29
During the past 13 years, the highest Debt-to-EBITDA Ratio of Lemtech Holdings Co was 3.44. The lowest was 1.57. And the median was 2.90.
TPE:4912's Debt-to-EBITDA is ranked worse than 59.11% of 2348
companies
in the Industrial Products industry
Industry Median: 1.68
vs TPE:4912: 2.29
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Lemtech Holdings Co Debt-to-EBITDA Related Terms
Lemtech Holdings Co Debt-to-EBITDA Historical Data
* Premium members only.
The historical data trend for Lemtech Holdings Co's Debt-to-EBITDA can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TPE:4912 vs CRS, ATI, MLI: Debt-to-EBITDA Comparison
For the Metal Fabrication subindustry, Lemtech Holdings Co's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Lemtech Holdings Co Debt-to-EBITDA vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Lemtech Holdings Co's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Lemtech Holdings Co's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Mar. 2026) EBITDA data.
Lemtech Holdings Co (TPE:4912) has a Debt-to-EBITDA of 1.92 as of Mar. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Lemtech Holdings Co. This is 34% below median its historical median of 2.90. Over the past decade, Lemtech Holdings Co's Debt-to-EBITDA has ranged from 1.57 to 3.44. According to the industry distribution chart, Lemtech Holdings Co ranks #1388 out of 2348 companies in the Industrial Products industry, placing it in the top 59.1%.
Is Lemtech Holdings Co's Debt-to-EBITDA too high?
Lemtech Holdings Co's current Debt-to-EBITDA of 1.92 is 34% below median its 10-year median of 2.90. Over the past 10 years, this metric has ranged from a low of 1.57 to a high of 3.44. The Industrial Products industry median Debt-to-EBITDA is 1.68. Lemtech Holdings Co's value of 1.92 is 14.3% above this industry median. Based on the distribution chart, Lemtech Holdings Co ranks #1388 out of 2348 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Lemtech Holdings Co has a GF Score™ of 81/100 and is considered Significantly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Lemtech Holdings Co's Debt-to-EBITDA compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Lemtech Holdings Co ranks #1388 out of 2348 companies for Debt-to-EBITDA. This places Lemtech Holdings Co in the lower half of its industry. The industry median Debt-to-EBITDA is 1.68. Lemtech Holdings Co's value of 1.92 is 14.3% above this benchmark. Historically, Lemtech Holdings Co's own Debt-to-EBITDA has ranged from 1.57 to 3.44 over the past decade. While the company's 10-year median is 2.90 vs. the industry median of 1.68, Lemtech Holdings Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for an Industrial Products company?
The median Debt-to-EBITDA among Industrial Products companies is 1.68, based on 2,348 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Lemtech Holdings Co's current Debt-to-EBITDA of 1.92 is 14.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Lemtech Holdings Co. For the Industrial Products industry, the median Debt-to-EBITDA is 1.68 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Lemtech Holdings Co's current Debt-to-EBITDA is 1.92, which is 34% below median its own 10-year median of 2.90. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Lemtech Holdings Co stock overvalued right now?
Based on GuruFocus' analysis, Lemtech Holdings Co (TPE:4912) is currently considered Significantly Undervalued. The stock's GF Value™ is NT$129.33, compared to a current price of NT$89.40 — trading 30.9% below its estimated fair value. The current Debt-to-EBITDA is 1.92, which is 34% below median its 10-year median of 2.90 and 14.3% above the Industrial Products industry median of 1.68. Lemtech Holdings Co's overall GF Score™ is 81/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Lemtech Holdings Co (TPE:4912), the current Debt-to-EBITDA is 1.92 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Lemtech Holdings Co (TPE:4912) Overvalued in 2026?
Based on GuruFocus' analysis, Lemtech Holdings Co stock appears to be undervalued.
The current stock price of NT$89.40 is trading 30.9% below its estimated GF Value™ of NT$129.33.
GuruFocus considers Lemtech Holdings Co to be Significantly Undervalued.
Key valuation signals for TPE:4912:
Debt-to-EBITDA: 1.92 (34% below median its 10-year median of 2.90)
GF Value™: NT$129.33 vs. price of NT$89.40 (30.9% below fair value)
Industry Position: 14.3% above the Industrial Products median (#1388 of 2348)
No single metric tells the full story. See the TPE:4912 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Lemtech Holdings Co Ltd focuses on the production and design of various new electronic components, such as fine blanking molds, die casting molds, non-metallic molds, computer connectors and computer heat dissipation modules, and sales of self-produced products. Its solutions consist of Precision Metal Stamping & Weldments, Overmolding, Precision Tooling, Heat Pipe & Vapor Chamber Heatsinks, Thermosiphon, Liquid Cooling/Cold Plate, Electromechanical Sub-Assemblies, Racks and Enclosures, and Slide Rail Kits. Its segments include Manufacturing Department in Taiwan, Manufacturing Department in China, Manufacturing Department in Europe, and Others. It derives the majority of revenue from Manufacturing Department in China.
81GF Score
Get the complete analysis for TPE:4912
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:4912 has been successfully added to your 
