Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
King Shing Industrial CoTPE:7732 +1.15%39 Debt-to-EBITDA is 0.61 as of Mar. 2026, which is 36% below its 10-year median of 0.95. GuruFocus rates TPE:7732 with a GF Score™ of 39/100. The stock has 5 warning signs investors should review. Among 2,331 Industrial Products companies, King Shing Industrial Co ranks better than 64.78% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for King Shing Industrial Co's Debt-to-EBITDA or its related term are showing as below:
TPE:7732'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 0.58 Med: 0.95 Max: 1.69
Current: 0.93
During the past 7 years, the highest Debt-to-EBITDA Ratio of King Shing Industrial Co was 1.69. The lowest was 0.58. And the median was 0.95.
TPE:7732's Debt-to-EBITDA is ranked better than 64.78% of 2331
companies
in the Industrial Products industry
Industry Median: 1.68
vs TPE:7732: 0.93
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
King Shing Industrial Co Debt-to-EBITDA Related Terms
King Shing Industrial Co Debt-to-EBITDA Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Electrical Equipment & Parts subindustry, King Shing Industrial Co's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
King Shing Industrial Co Debt-to-EBITDA vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, King Shing Industrial Co's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where King Shing Industrial Co's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Mar. 2026) EBITDA data.
King Shing Industrial Co (TPE:7732) has a Debt-to-EBITDA of 0.61 as of Mar. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on King Shing Industrial Co. This is 36% below median its historical median of 0.95. Over the past decade, King Shing Industrial Co's Debt-to-EBITDA has ranged from 0.58 to 1.69. According to the industry distribution chart, King Shing Industrial Co ranks #821 out of 2331 companies in the Industrial Products industry, placing it in the top 35.2%.
Is King Shing Industrial Co's Debt-to-EBITDA too high?
King Shing Industrial Co's current Debt-to-EBITDA of 0.61 is 36% below median its 10-year median of 0.95. Over the past 10 years, this metric has ranged from a low of 0.58 to a high of 1.69. The Industrial Products industry median Debt-to-EBITDA is 1.68. King Shing Industrial Co's value of 0.61 is 63.7% below this industry median. Based on the distribution chart, King Shing Industrial Co ranks #821 out of 2331 companies in the Industrial Products industry, which is above the industry midpoint. Overall, King Shing Industrial Co has a GF Score™ of 39/100, reflecting its overall financial health beyond just this single metric.
How does King Shing Industrial Co's Debt-to-EBITDA compare to VRT and BE?
According to the Industrial Products industry distribution chart, King Shing Industrial Co ranks #821 out of 2331 companies for Debt-to-EBITDA. This puts King Shing Industrial Co in the upper half of its industry. The industry median Debt-to-EBITDA is 1.68. King Shing Industrial Co's value of 0.61 is 63.7% below this benchmark. Historically, King Shing Industrial Co's own Debt-to-EBITDA has ranged from 0.58 to 1.69 over the past decade. While the company's 10-year median is 0.95 vs. the industry median of 1.68, King Shing Industrial Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for an Industrial Products company?
The median Debt-to-EBITDA among Industrial Products companies is 1.68, based on 2,331 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. King Shing Industrial Co's current Debt-to-EBITDA of 0.61 is 63.7% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on King Shing Industrial Co. For the Industrial Products industry, the median Debt-to-EBITDA is 1.68 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. King Shing Industrial Co's current Debt-to-EBITDA is 0.61, which is 36% below median its own 10-year median of 0.95. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is King Shing Industrial Co stock overvalued right now?
King Shing Industrial Co (TPE:7732) has a current Debt-to-EBITDA of 0.61. The current Debt-to-EBITDA is 0.61, which is 36% below median its 10-year median of 0.95 and 63.7% below the Industrial Products industry median of 1.68. King Shing Industrial Co's overall GF Score™ is 39/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For King Shing Industrial Co (TPE:7732), the current Debt-to-EBITDA is 0.61 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
King Shing Industrial Co Ltd and its subsidiaries are mainly engaged in the research, development, manufacturing, and sales of automotive parts. The Company's main industries include fan assy, blower, timing cover, DC motor, PWM & LIN module, injection part, stamping part, molding design, and molding manufacture. Its products include fan assy, blower, blade, shroud, motor, timing cover, and brushless motor. The Company also provides solutions including product development, R&D test equipment, mold and tooling shop in Thailand, plastic injection molding, and others. Geographically, the Company generates the majority of its revenue from the USA.
39GF Score
Get the complete analysis for TPE:7732
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:7732 has been successfully added to your 
