Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Punch Industry CoTSE:6165 +1.65%65 Debt-to-EBITDA is 1.15 as of Mar. 2026, which is 8% below its 10-year median of 1.25. GuruFocus rates TSE:6165 with a GF Score™ of 65/100 and a GF Value™ of 円390.10 (Significantly Overvalued). The stock has 9 warning signs investors should review. Among 2,313 Industrial Products companies, Punch Industry Co ranks better than 62.91% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Punch Industry Co's Debt-to-EBITDA or its related term are showing as below:
TSE:6165'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: -8.6 Med: 1.25 Max: 3.07
Current: 1.05
During the past 13 years, the highest Debt-to-EBITDA Ratio of Punch Industry Co was 3.07. The lowest was -8.60. And the median was 1.25.
TSE:6165's Debt-to-EBITDA is ranked better than 62.91% of 2313
companies
in the Industrial Products industry
Industry Median: 1.69
vs TSE:6165: 1.05
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Punch Industry Co Debt-to-EBITDA Related Terms
Punch Industry Co Debt-to-EBITDA Historical Data
* Premium members only.
The historical data trend for Punch Industry Co's Debt-to-EBITDA can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TSE:6165 vs SNA, RBC, LECO: Debt-to-EBITDA Comparison
For the Tools & Accessories subindustry, Punch Industry Co's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Punch Industry Co Debt-to-EBITDA vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Punch Industry Co's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Punch Industry Co's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is two times the quarterly (Mar. 2026) EBITDA data.
Punch Industry Co (TSE:6165) has a Debt-to-EBITDA of 1.15 as of Mar. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Punch Industry Co. This is near median its historical median of 1.25. According to the industry distribution chart, Punch Industry Co ranks #858 out of 2313 companies in the Industrial Products industry, placing it in the top 37.1%.
Is Punch Industry Co's Debt-to-EBITDA too high?
Punch Industry Co's current Debt-to-EBITDA of 1.15 is near median its 10-year median of 1.25. The Industrial Products industry median Debt-to-EBITDA is 1.69. Punch Industry Co's value of 1.15 is 32% below this industry median. Based on the distribution chart, Punch Industry Co ranks #858 out of 2313 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Punch Industry Co has a GF Score™ of 65/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Punch Industry Co's Debt-to-EBITDA compare to SNA and RBC?
According to the Industrial Products industry distribution chart, Punch Industry Co ranks #858 out of 2313 companies for Debt-to-EBITDA. This puts Punch Industry Co in the upper half of its industry. The industry median Debt-to-EBITDA is 1.69. Punch Industry Co's value of 1.15 is 32% below this benchmark. While the company's 10-year median is 1.25 vs. the industry median of 1.69, Punch Industry Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for an Industrial Products company?
The median Debt-to-EBITDA among Industrial Products companies is 1.69, based on 2,313 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Punch Industry Co's current Debt-to-EBITDA of 1.15 is 32% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Punch Industry Co. For the Industrial Products industry, the median Debt-to-EBITDA is 1.69 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Punch Industry Co's current Debt-to-EBITDA is 1.15, which is near median its own 10-year median of 1.25. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Punch Industry Co stock overvalued right now?
Based on GuruFocus' analysis, Punch Industry Co (TSE:6165) is currently considered Significantly Overvalued. The stock's GF Value™ is 円390.10, compared to a current price of 円555.00 — trading 42.3% above its estimated fair value. The current Debt-to-EBITDA is 1.15, which is near median its 10-year median of 1.25 and 32% below the Industrial Products industry median of 1.69. Punch Industry Co's overall GF Score™ is 65/100 with 9 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Punch Industry Co (TSE:6165), the current Debt-to-EBITDA is 1.15 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Punch Industry Co (TSE:6165) Overvalued in 2026?
Based on GuruFocus' analysis, Punch Industry Co stock appears to be overvalued.
The current stock price of 円555.00 is trading 42.3% above its estimated GF Value™ of 円390.10.
GuruFocus considers Punch Industry Co to be Significantly Overvalued.
Key valuation signals for TSE:6165:
Debt-to-EBITDA: 1.15 (near median its 10-year median of 1.25)
GF Value™: 円390.10 vs. price of 円555.00 (42.3% above fair value)
Industry Position: 32% below the Industrial Products median (#858 of 2313)
No single metric tells the full story. See the TSE:6165 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Punch Industry Co Ltd is engaged in the manufacture and sale of mould and die components. The product portfolio includes ejector pins, centre pins, core pins, dies, retainers, precision punches and dies, carbide punches, carbide dies, stripper bolts, coil springs, urethane springs, among others.
65GF Score
Get the complete analysis for TSE:6165
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6165 has been successfully added to your 
