Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Chun Zu Machinery Industry CoROCO:4544 -3.69%68 Debt-to-Equity is 0.13 as of Jun. 2026, which is 19% below its 10-year median of 0.16. GuruFocus rates ROCO:4544 with a GF Score™ of 68/100 and a GF Value™ of NT$16.16 (Modestly Undervalued). The stock has 8 warning signs investors should review. Among 2,685 Industrial Products companies, Chun Zu Machinery Industry Co ranks better than 69.91% on this metric.
A high debt to equity ratio generally means that a company has been aggressive in financing its growth with debt. This can result in volatile earnings as a result of the additional interest expense.
The historical rank and industry rank for Chun Zu Machinery Industry Co's Debt-to-Equity or its related term are showing as below:
ROCO:4544'
s Debt-to-Equity Range Over the Past 10 Years
Min: 0.03 Med: 0.16 Max: 0.4
Current: 0.13
During the past 13 years, the highest Debt-to-Equity Ratio of Chun Zu Machinery Industry Co was 0.40. The lowest was 0.03. And the median was 0.16.
ROCO:4544's Debt-to-Equity is ranked better than 69.91% of 2685
companies
in the Industrial Products industry
Industry Median: 0.3
vs ROCO:4544: 0.13
Because a company can increase its ROE % by having more financial leverage, it is important to watch the leverage ratio when investing in high ROE % companies.
Chun Zu Machinery Industry Co Debt-to-Equity Related Terms
Chun Zu Machinery Industry Co Debt-to-Equity Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Chun Zu Machinery Industry Co Debt-to-Equity Chart
ROCO:4544 vs GEV, ETN, PH: Debt-to-Equity Comparison
For the Specialty Industrial Machinery subindustry, Chun Zu Machinery Industry Co's Debt-to-Equity, along with its competitors' market caps and Debt-to-Equity data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Chun Zu Machinery Industry Co Debt-to-Equity vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Chun Zu Machinery Industry Co's Debt-to-Equity distribution charts can be found below:
* The bar in red indicates where Chun Zu Machinery Industry Co's Debt-to-Equity falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Chun Zu Machinery Industry Co (ROCO:4544) has a Debt-to-Equity of 0.13 as of Jun. 2026. Debt-to-Equity ratio represents the ratio of total debt to total company equity. View historical data on Chun Zu Machinery Industry Co and its competitors. This is 19% below median its historical median of 0.16. Over the past decade, Chun Zu Machinery Industry Co's Debt-to-Equity has ranged from 0.03 to 0.40. According to the industry distribution chart, Chun Zu Machinery Industry Co ranks #808 out of 2685 companies in the Industrial Products industry, placing it in the top 30.1%.
Is Chun Zu Machinery Industry Co's Debt-to-Equity too high?
Chun Zu Machinery Industry Co's current Debt-to-Equity of 0.13 is 19% below median its 10-year median of 0.16. Over the past 10 years, this metric has ranged from a low of 0.03 to a high of 0.40. The Industrial Products industry median Debt-to-Equity is 0.30. Chun Zu Machinery Industry Co's value of 0.13 is 56.7% below this industry median. Based on the distribution chart, Chun Zu Machinery Industry Co ranks #808 out of 2685 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Chun Zu Machinery Industry Co has a GF Score™ of 68/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Chun Zu Machinery Industry Co's Debt-to-Equity compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Chun Zu Machinery Industry Co ranks #808 out of 2685 companies for Debt-to-Equity. This puts Chun Zu Machinery Industry Co in the upper half of its industry. The industry median Debt-to-Equity is 0.30. Chun Zu Machinery Industry Co's value of 0.13 is 56.7% below this benchmark. Historically, Chun Zu Machinery Industry Co's own Debt-to-Equity has ranged from 0.03 to 0.40 over the past decade. While the company's 10-year median is 0.16 vs. the industry median of 0.30, Chun Zu Machinery Industry Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-Equity for an Industrial Products company?
The median Debt-to-Equity among Industrial Products companies is 0.30, based on 2,685 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-Equity significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-Equity should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Chun Zu Machinery Industry Co's current Debt-to-Equity of 0.13 is 56.7% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-Equity mean?
A high Debt-to-Equity can signal that a stock is expensive relative to its fundamentals. Debt-to-Equity ratio represents the ratio of total debt to total company equity. View historical data on Chun Zu Machinery Industry Co and its competitors. For the Industrial Products industry, the median Debt-to-Equity is 0.30 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Chun Zu Machinery Industry Co's current Debt-to-Equity is 0.13, which is 19% below median its own 10-year median of 0.16. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Chun Zu Machinery Industry Co stock overvalued right now?
Based on GuruFocus' analysis, Chun Zu Machinery Industry Co (ROCO:4544) is currently considered Modestly Undervalued. The stock's GF Value™ is NT$16.16, compared to a current price of NT$13.05 — trading 19.2% below its estimated fair value. The current Debt-to-Equity is 0.13, which is 19% below median its 10-year median of 0.16 and 56.7% below the Industrial Products industry median of 0.30. Chun Zu Machinery Industry Co's overall GF Score™ is 68/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-Equity calculated?
Debt-to-Equity is calculated from a company's financial statements. For Chun Zu Machinery Industry Co (ROCO:4544), the current Debt-to-Equity is 0.13 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Chun Zu Machinery Industry Co (ROCO:4544) Overvalued in 2026?
Based on GuruFocus' analysis, Chun Zu Machinery Industry Co stock appears to be undervalued.
The current stock price of NT$13.05 is trading 19.2% below its estimated GF Value™ of NT$16.16.
GuruFocus considers Chun Zu Machinery Industry Co to be Modestly Undervalued.
Key valuation signals for ROCO:4544:
Debt-to-Equity: 0.13 (19% below median its 10-year median of 0.16)
GF Value™: NT$16.16 vs. price of NT$13.05 (19.2% below fair value)
Industry Position: 56.7% below the Industrial Products median (#808 of 2685)
No single metric tells the full story. See the ROCO:4544 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Chun Zu Machinery Industry Co Ltd operates in Tools and accessories industry. The company manufactures metal cutting machine tools. The group export products include bolt formers, mini part formers, nut formers, and forming tools.
68GF Score
Get the complete analysis for ROCO:4544
Debt-to-Equity is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:4544 has been successfully added to your 
