What is Chun Zu Machinery Industry Co Quick Ratio?
Chun Zu Machinery Industry CoROCO:4544 72 Quick Ratio is 0.94 as of Dec. 2025, which is 1% above its 10-year median of 0.93. GuruFocus rates ROCO:4544 with a GF Score™ of 72/100 and a GF Value™ of NT$16.95 (Modestly Undervalued). The stock has 9 warning signs investors should review. Among 3,073 Industrial Products companies, Chun Zu Machinery Industry Co ranks worse than 73.15% on this metric.
Chun Zu Machinery Industry Co has a quick ratio of 0.94. It indicates that the company cannot currently fully pay back its current liabilities.
The historical rank and industry rank for Chun Zu Machinery Industry Co's Quick Ratio or its related term are showing as below:
ROCO:4544'
s Quick Ratio Range Over the Past 10 Years
Min: 0.83 Med: 0.93 Max: 1.15
Current: 0.94
During the past 13 years, Chun Zu Machinery Industry Co's highest Quick Ratio was 1.15. The lowest was 0.83. And the median was 0.93.
ROCO:4544's Quick Ratio is ranked worse than 73.15% of 3073
companies
in the Industrial Products industry
Industry Median: 1.39
vs ROCO:4544: 0.94
Chun Zu Machinery Industry Co (ROCO:4544) Quick Ratio Explanation
The quick ratio is more conservative than the Current Ratio because it excludes inventories from current assets. The ratio derives its name presumably from the fact that assets such as cash and marketable securities are quick sources of cash. Inventories generally take time to be converted into cash, and if they have to be sold quickly, the company may have to accept a lower price than book value of these inventories. As a result, they are justifiably excluded from assets that are ready sources of immediate cash.
In general, low or decreasing quick ratios generally suggest that a company is over-leveraged, struggling to maintain or grow sales, paying bills too quickly or collecting receivables too slowly. On the other hand, a high or increasing quick ratio generally indicates that a company is experiencing solid top-line growth, quickly converting receivables into cash, and easily able to cover its financial obligations. Such companies often have faster inventory turnover and cash conversion cycles.
The higher the quick ratio, the better the company's liquidity position.
Chun Zu Machinery Industry Co Quick Ratio Related Terms
Chun Zu Machinery Industry Co Quick Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Chun Zu Machinery Industry Co's Quick Ratio, along with its competitors' market caps and Quick Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Chun Zu Machinery Industry Co Quick Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Chun Zu Machinery Industry Co's Quick Ratio distribution charts can be found below:
* The bar in red indicates where Chun Zu Machinery Industry Co's Quick Ratio falls into.
Chun Zu Machinery Industry Co Quick Ratio Calculation
The quick ratio measures a company's ability to meet its short-term obligations with its most liquid assets. For this reason, the ratio excludes inventories from current assets.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Chun Zu Machinery Industry Co (ROCO:4544) has a Quick Ratio of 0.94 as of Dec. 2025. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Chun Zu Machinery Industry Co and its competitors. This is near median its historical median of 0.93. Over the past decade, Chun Zu Machinery Industry Co's Quick Ratio has ranged from 0.83 to 1.15. According to the industry distribution chart, Chun Zu Machinery Industry Co ranks #2248 out of 3073 companies in the Industrial Products industry, placing it in the top 73.2%.
Is Chun Zu Machinery Industry Co's Quick Ratio too high?
Chun Zu Machinery Industry Co's current Quick Ratio of 0.94 is near median its 10-year median of 0.93. Over the past 10 years, this metric has ranged from a low of 0.83 to a high of 1.15. The Industrial Products industry median Quick Ratio is 1.39. Chun Zu Machinery Industry Co's value of 0.94 is 32.4% below this industry median. Based on the distribution chart, Chun Zu Machinery Industry Co ranks #2248 out of 3073 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Chun Zu Machinery Industry Co has a GF Score™ of 72/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Chun Zu Machinery Industry Co's Quick Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Chun Zu Machinery Industry Co ranks #2248 out of 3073 companies for Quick Ratio. This places Chun Zu Machinery Industry Co in the lower half of its industry. The industry median Quick Ratio is 1.39. Chun Zu Machinery Industry Co's value of 0.94 is 32.4% below this benchmark. Historically, Chun Zu Machinery Industry Co's own Quick Ratio has ranged from 0.83 to 1.15 over the past decade. While the company's 10-year median is 0.93 vs. the industry median of 1.39, Chun Zu Machinery Industry Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Quick Ratio for an Industrial Products company?
The median Quick Ratio among Industrial Products companies is 1.39, based on 3,073 companies in the industry. Companies in the top quartile (top 25%) have a Quick Ratio significantly above this median, while those in the bottom quartile fall well below. However, Quick Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Chun Zu Machinery Industry Co's current Quick Ratio of 0.94 is 32.4% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Quick Ratio mean?
A high Quick Ratio can signal that a stock is expensive relative to its fundamentals. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Chun Zu Machinery Industry Co and its competitors. For the Industrial Products industry, the median Quick Ratio is 1.39 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Chun Zu Machinery Industry Co's current Quick Ratio is 0.94, which is near median its own 10-year median of 0.93. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Chun Zu Machinery Industry Co stock overvalued right now?
Based on GuruFocus' analysis, Chun Zu Machinery Industry Co (ROCO:4544) is currently considered Modestly Undervalued. The stock's GF Value™ is NT$16.95, compared to a current price of NT$14.45 — trading 14.7% below its estimated fair value. The current Quick Ratio is 0.94, which is near median its 10-year median of 0.93 and 32.4% below the Industrial Products industry median of 1.39. Chun Zu Machinery Industry Co's overall GF Score™ is 72/100 with 9 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Quick Ratio calculated?
Quick Ratio is calculated from a company's financial statements. For Chun Zu Machinery Industry Co (ROCO:4544), the current Quick Ratio is 0.94 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Chun Zu Machinery Industry Co (ROCO:4544) Overvalued in 2026?
Based on GuruFocus' analysis, Chun Zu Machinery Industry Co stock appears to be undervalued.
The current stock price of NT$14.45 is trading 14.7% below its estimated GF Value™ of NT$16.95.
GuruFocus considers Chun Zu Machinery Industry Co to be Modestly Undervalued.
Key valuation signals for ROCO:4544:
Quick Ratio: 0.94 (near median its 10-year median of 0.93)
GF Value™: NT$16.95 vs. price of NT$14.45 (14.7% below fair value)
Industry Position: 32.4% below the Industrial Products median (#2248 of 3073)
No single metric tells the full story. See the ROCO:4544 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Chun Zu Machinery Industry Co Business Description
Chun Zu Machinery Industry Co Ltd operates in Tools and accessories industry. The company manufactures metal cutting machine tools. The group export products include bolt formers, mini part formers, nut formers, and forming tools.
72GF Score
Get the complete analysis for ROCO:4544
Quick Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:4544 has been successfully added to your 
