Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Awea Mechantronic CoTPE:1530 -1.22%65 Debt-to-Equity is 0.56 as of Jun. 2026, which is 25% below its 10-year median of 0.75. GuruFocus rates TPE:1530 with a GF Score™ of 65/100 and a GF Value™ of NT$21.12 (Significantly Overvalued). The stock has 6 warning signs investors should review. Among 2,685 Industrial Products companies, Awea Mechantronic Co ranks worse than 70.54% on this metric.
A high debt to equity ratio generally means that a company has been aggressive in financing its growth with debt. This can result in volatile earnings as a result of the additional interest expense.
The historical rank and industry rank for Awea Mechantronic Co's Debt-to-Equity or its related term are showing as below:
TPE:1530'
s Debt-to-Equity Range Over the Past 10 Years
Min: 0.55 Med: 0.75 Max: 1.33
Current: 0.56
During the past 13 years, the highest Debt-to-Equity Ratio of Awea Mechantronic Co was 1.33. The lowest was 0.55. And the median was 0.75.
TPE:1530's Debt-to-Equity is ranked worse than 70.54% of 2685
companies
in the Industrial Products industry
Industry Median: 0.29
vs TPE:1530: 0.56
Because a company can increase its ROE % by having more financial leverage, it is important to watch the leverage ratio when investing in high ROE % companies.
Awea Mechantronic Co Debt-to-Equity Related Terms
Awea Mechantronic Co Debt-to-Equity Historical Data
* Premium members only.
The historical data trend for Awea Mechantronic Co's Debt-to-Equity can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TPE:1530 vs GEV, ETN, PH: Debt-to-Equity Comparison
For the Specialty Industrial Machinery subindustry, Awea Mechantronic Co's Debt-to-Equity, along with its competitors' market caps and Debt-to-Equity data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Awea Mechantronic Co Debt-to-Equity vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Awea Mechantronic Co's Debt-to-Equity distribution charts can be found below:
* The bar in red indicates where Awea Mechantronic Co's Debt-to-Equity falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Awea Mechantronic Co (TPE:1530) has a Debt-to-Equity of 0.56 as of Jun. 2026. Debt-to-Equity ratio represents the ratio of total debt to total company equity. View historical data on Awea Mechantronic Co and its competitors. This is 25% below median its historical median of 0.75. Over the past decade, Awea Mechantronic Co's Debt-to-Equity has ranged from 0.55 to 1.33. According to the industry distribution chart, Awea Mechantronic Co ranks #1894 out of 2685 companies in the Industrial Products industry, placing it in the top 70.5%.
Is Awea Mechantronic Co's Debt-to-Equity too high?
Awea Mechantronic Co's current Debt-to-Equity of 0.56 is 25% below median its 10-year median of 0.75. Over the past 10 years, this metric has ranged from a low of 0.55 to a high of 1.33. The Industrial Products industry median Debt-to-Equity is 0.29. Awea Mechantronic Co's value of 0.56 is 93.1% above this industry median. Based on the distribution chart, Awea Mechantronic Co ranks #1894 out of 2685 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Awea Mechantronic Co has a GF Score™ of 65/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Awea Mechantronic Co's Debt-to-Equity compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Awea Mechantronic Co ranks #1894 out of 2685 companies for Debt-to-Equity. This places Awea Mechantronic Co in the lower half of its industry. The industry median Debt-to-Equity is 0.29. Awea Mechantronic Co's value of 0.56 is 93.1% above this benchmark. Historically, Awea Mechantronic Co's own Debt-to-Equity has ranged from 0.55 to 1.33 over the past decade. While the company's 10-year median is 0.75 vs. the industry median of 0.29, Awea Mechantronic Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-Equity for an Industrial Products company?
The median Debt-to-Equity among Industrial Products companies is 0.29, based on 2,685 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-Equity significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-Equity should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Awea Mechantronic Co's current Debt-to-Equity of 0.56 is 93.1% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-Equity mean?
A high Debt-to-Equity can signal that a stock is expensive relative to its fundamentals. Debt-to-Equity ratio represents the ratio of total debt to total company equity. View historical data on Awea Mechantronic Co and its competitors. For the Industrial Products industry, the median Debt-to-Equity is 0.29 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Awea Mechantronic Co's current Debt-to-Equity is 0.56, which is 25% below median its own 10-year median of 0.75. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Awea Mechantronic Co stock overvalued right now?
Based on GuruFocus' analysis, Awea Mechantronic Co (TPE:1530) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$21.12, compared to a current price of NT$28.25 — trading 33.8% above its estimated fair value. The current Debt-to-Equity is 0.56, which is 25% below median its 10-year median of 0.75 and 93.1% above the Industrial Products industry median of 0.29. Awea Mechantronic Co's overall GF Score™ is 65/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-Equity calculated?
Debt-to-Equity is calculated from a company's financial statements. For Awea Mechantronic Co (TPE:1530), the current Debt-to-Equity is 0.56 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Awea Mechantronic Co (TPE:1530) Overvalued in 2026?
Based on GuruFocus' analysis, Awea Mechantronic Co stock appears to be overvalued.
The current stock price of NT$28.25 is trading 33.8% above its estimated GF Value™ of NT$21.12.
GuruFocus considers Awea Mechantronic Co to be Significantly Overvalued.
Key valuation signals for TPE:1530:
Debt-to-Equity: 0.56 (25% below median its 10-year median of 0.75)
GF Value™: NT$21.12 vs. price of NT$28.25 (33.8% above fair value)
Industry Position: 93.1% above the Industrial Products median (#1894 of 2685)
No single metric tells the full story. See the TPE:1530 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Awea Mechantronic Co Ltd designs manufactures and sells computer numerically controlled machine tools. The company's products include bridge-type machines, CNC vertical machines, gantry-type machines, and horizontal boring machines. It has two segments Taiwan Area and Awea (Suzhou). The company operates in Asia, America, Europe and other countries.
65GF Score
Get the complete analysis for TPE:1530
Debt-to-Equity is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:1530 has been successfully added to your 
