Awea Mechantronic CoTPE:1530 +0.70%64 PEG Ratio is 9.71 as of Jul. 09, 2026, which is 22% above its 10-year median of 7.99. GuruFocus rates TPE:1530 with a GF Score™ of 64/100 and a GF Value™ of NT$23.69 (Modestly Overvalued). The stock has 5 warning signs investors should review. Among 1,280 Industrial Products companies, Awea Mechantronic Co ranks worse than 87.19% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Awea Mechantronic Co's PEG Ratio or its related term are showing as below:
TPE:1530'
s PEG Ratio Range Over the Past 10 Years
Min: 0.84 Med: 7.99 Max: 41.66
Current: 9.71
During the past 13 years, Awea Mechantronic Co's highest PEG Ratio was 41.66. The lowest was 0.84. And the median was 7.99.
TPE:1530's PEG Ratio is ranked worse than 87.19% of 1280
companies
in the Industrial Products industry
Industry Median: 1.805
vs TPE:1530: 9.71
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Awea Mechantronic Co (TPE:1530) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Awea Mechantronic Co PEG Ratio Related Terms
Awea Mechantronic Co PEG Ratio Historical Data
* Premium members only.
The historical data trend for Awea Mechantronic Co's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Awea Mechantronic Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Awea Mechantronic Co PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Awea Mechantronic Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Awea Mechantronic Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Awea Mechantronic Co (TPE:1530) has a PEG Ratio of 9.71 as of Jul. 09, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Awea Mechantronic Co and its competitors. This is 22% above median its historical median of 7.99. Over the past decade, Awea Mechantronic Co's PEG Ratio has ranged from 0.84 to 41.66. According to the industry distribution chart, Awea Mechantronic Co ranks #1116 out of 1280 companies in the Industrial Products industry, placing it in the top 87.2%.
Is Awea Mechantronic Co's PEG Ratio too high?
Awea Mechantronic Co's current PEG Ratio of 9.71 is 22% above median its 10-year median of 7.99. Over the past 10 years, this metric has ranged from a low of 0.84 to a high of 41.66. The Industrial Products industry median PEG Ratio is 1.81. Awea Mechantronic Co's value of 9.71 is 438% above this industry median. Based on the distribution chart, Awea Mechantronic Co ranks #1116 out of 1280 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Awea Mechantronic Co has a GF Score™ of 64/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Awea Mechantronic Co's PEG Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Awea Mechantronic Co ranks #1116 out of 1280 companies for PEG Ratio. This places Awea Mechantronic Co in the lower half of its industry. The industry median PEG Ratio is 1.81. Awea Mechantronic Co's value of 9.71 is 438% above this benchmark. Historically, Awea Mechantronic Co's own PEG Ratio has ranged from 0.84 to 41.66 over the past decade. While the company's 10-year median is 7.99 vs. the industry median of 1.81, Awea Mechantronic Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.81, based on 1,280 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Awea Mechantronic Co's current PEG Ratio of 9.71 is 438% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Awea Mechantronic Co and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.81 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Awea Mechantronic Co's current PEG Ratio is 9.71, which is 22% above median its own 10-year median of 7.99. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Awea Mechantronic Co stock overvalued right now?
Based on GuruFocus' analysis, Awea Mechantronic Co (TPE:1530) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$23.69, compared to a current price of NT$28.75 — trading 21.4% above its estimated fair value. The current PEG Ratio is 9.71, which is 22% above median its 10-year median of 7.99 and 438% above the Industrial Products industry median of 1.81. Awea Mechantronic Co's overall GF Score™ is 64/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Awea Mechantronic Co (TPE:1530), the current PEG Ratio is 9.71 as of Jul. 09, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Awea Mechantronic Co (TPE:1530) Overvalued in 2026?
Based on GuruFocus' analysis, Awea Mechantronic Co stock appears to be overvalued.
The current stock price of NT$28.75 is trading 21.4% above its estimated GF Value™ of NT$23.69.
GuruFocus considers Awea Mechantronic Co to be Modestly Overvalued.
Key valuation signals for TPE:1530:
PEG Ratio: 9.71 (22% above median its 10-year median of 7.99)
GF Value™: NT$23.69 vs. price of NT$28.75 (21.4% above fair value)
Industry Position: 438% above the Industrial Products median (#1116 of 1280)
No single metric tells the full story. See the TPE:1530 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Awea Mechantronic Co Ltd designs manufactures and sells computer numerically controlled machine tools. The company's products include bridge-type machines, CNC vertical machines, gantry-type machines, and horizontal boring machines. It has two segments Taiwan Area and Awea (Suzhou). The company operates in Asia, America, Europe and other countries.
64GF Score
Get the complete analysis for TPE:1530
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:1530 has been successfully added to your 
