Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Awea Mechantronic CoTPE:1530 -1.67%61 EBITDA Margin % is 6.18% as of Jun. 2026, which is 49% below its 10-year median of 12.19. GuruFocus rates TPE:1530 with a GF Score™ of 61/100 and a GF Value™ of NT$21.24 (Significantly Overvalued). The stock has 8 warning signs investors should review. Among 3,044 Industrial Products companies, Awea Mechantronic Co ranks better than 83.54% on this metric.
Awea Mechantronic Co (TPE:1530) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Awea Mechantronic Co EBITDA Margin % Related Terms
Awea Mechantronic Co EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Awea Mechantronic Co's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TPE:1530 vs GEV, ETN, PH: EBITDA Margin % Comparison
For the Specialty Industrial Machinery subindustry, Awea Mechantronic Co's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Awea Mechantronic Co EBITDA Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Awea Mechantronic Co's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Awea Mechantronic Co's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Awea Mechantronic Co (TPE:1530) has a EBITDA Margin % of 6.18% as of Jun. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Awea Mechantronic Co and its competitors. This is 49% below median its historical median of 12.19. Over the past decade, Awea Mechantronic Co's EBITDA Margin % has ranged from 9.52 to 31.22. According to the industry distribution chart, Awea Mechantronic Co ranks #501 out of 3044 companies in the Industrial Products industry, placing it in the top 16.5%.
Is Awea Mechantronic Co's EBITDA Margin % too high?
Awea Mechantronic Co's current EBITDA Margin % of 6.18% is 49% below median its 10-year median of 12.19. Over the past 10 years, this metric has ranged from a low of 9.52 to a high of 31.22. The Industrial Products industry median EBITDA Margin % is 9.72. Awea Mechantronic Co's value of 6.18% is 36.4% below this industry median. Based on the distribution chart, Awea Mechantronic Co ranks #501 out of 3044 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Awea Mechantronic Co has a GF Score™ of 61/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Awea Mechantronic Co's EBITDA Margin % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Awea Mechantronic Co ranks #501 out of 3044 companies for EBITDA Margin %. This places Awea Mechantronic Co in the top 17% of its industry — outperforming the majority of peers. The industry median EBITDA Margin % is 9.72. Awea Mechantronic Co's value of 6.18% is 36.4% below this benchmark. Historically, Awea Mechantronic Co's own EBITDA Margin % has ranged from 9.52 to 31.22 over the past decade. While the company's 10-year median is 12.19 vs. the industry median of 9.72, Awea Mechantronic Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for an Industrial Products company?
The median EBITDA Margin % among Industrial Products companies is 9.72, based on 3,044 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Awea Mechantronic Co's current EBITDA Margin % of 6.18% is 36.4% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Awea Mechantronic Co and its competitors. For the Industrial Products industry, the median EBITDA Margin % is 9.72 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Awea Mechantronic Co's current EBITDA Margin % is 6.18%, which is 49% below median its own 10-year median of 12.19. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Awea Mechantronic Co stock overvalued right now?
Based on GuruFocus' analysis, Awea Mechantronic Co (TPE:1530) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$21.24, compared to a current price of NT$29.20 — trading 37.5% above its estimated fair value. The current EBITDA Margin % is 6.18%, which is 49% below median its 10-year median of 12.19 and 36.4% below the Industrial Products industry median of 9.72. Awea Mechantronic Co's overall GF Score™ is 61/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Awea Mechantronic Co (TPE:1530), the current EBITDA Margin % is 6.18% as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Awea Mechantronic Co (TPE:1530) Overvalued in 2026?
Based on GuruFocus' analysis, Awea Mechantronic Co stock appears to be overvalued.
The current stock price of NT$29.20 is trading 37.5% above its estimated GF Value™ of NT$21.24.
GuruFocus considers Awea Mechantronic Co to be Significantly Overvalued.
Key valuation signals for TPE:1530:
EBITDA Margin %: 6.18% (49% below median its 10-year median of 12.19)
GF Value™: NT$21.24 vs. price of NT$29.20 (37.5% above fair value)
Industry Position: 36.4% below the Industrial Products median (#501 of 3044)
No single metric tells the full story. See the TPE:1530 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Awea Mechantronic Co Ltd designs manufactures and sells computer numerically controlled machine tools. The company's products include bridge-type machines, CNC vertical machines, gantry-type machines, and horizontal boring machines. It has two segments Taiwan Area and Awea (Suzhou). The company operates in Asia, America, Europe and other countries.
61GF Score
Get the complete analysis for TPE:1530
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:1530 has been successfully added to your 
