Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
National FittingsBOM:531289 -1.79%77 EBITDA Margin % is 20.74% as of Mar. 2026, which is 27% above its 10-year median of 16.34. GuruFocus rates BOM:531289 with a GF Score™ of 77/100 and a GF Value™ of ₹164.94 (Fairly Valued). The stock has 3 warning signs investors should review. Among 1,770 Construction companies, National Fittings ranks better than 80.51% on this metric.
EBITDA Margin % is calculated as EBITDA divided by its Revenue. National Fittings's EBITDA for the
three
months ended in Mar. 2026 was ₹48.8 Mil. National Fittings's Revenue for the
three
months ended in Mar. 2026 was ₹235.4 Mil. Therefore, National Fittings's EBITDA margin for the quarter that ended in Mar. 2026 was 20.74%.
National Fittings (BOM:531289) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
National Fittings EBITDA Margin % Related Terms
National Fittings EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for National Fittings's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BOM:531289 vs TT, JCI, CARR: EBITDA Margin % Comparison
For the Building Products & Equipment subindustry, National Fittings's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
National Fittings EBITDA Margin % vs Construction Industry
For the Construction industry and Industrials sector, National Fittings's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where National Fittings's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
National Fittings (BOM:531289) has a EBITDA Margin % of 20.74% as of Mar. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on National Fittings and its competitors. This is 27% above median its historical median of 16.34. Over the past decade, National Fittings' EBITDA Margin % has ranged from 8.31 to 38.47. According to the industry distribution chart, National Fittings ranks #345 out of 1770 companies in the Construction industry, placing it in the top 19.5%.
Is National Fittings' EBITDA Margin % too high?
National Fittings' current EBITDA Margin % of 20.74% is 27% above median its 10-year median of 16.34. Over the past 10 years, this metric has ranged from a low of 8.31 to a high of 38.47. The Construction industry median EBITDA Margin % is 9.14. National Fittings' value of 20.74% is 126.9% above this industry median. Based on the distribution chart, National Fittings ranks #345 out of 1770 companies in the Construction industry, which is in the top quartile — a strong position relative to peers. Overall, National Fittings has a GF Score™ of 77/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does National Fittings' EBITDA Margin % compare to TT and JCI?
According to the Construction industry distribution chart, National Fittings ranks #345 out of 1770 companies for EBITDA Margin %. This places National Fittings in the top 20% of its industry — outperforming the majority of peers. The industry median EBITDA Margin % is 9.14. National Fittings' value of 20.74% is 126.9% above this benchmark. Historically, National Fittings' own EBITDA Margin % has ranged from 8.31 to 38.47 over the past decade. While the company's 10-year median is 16.34 vs. the industry median of 9.14, National Fittings has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for a Construction company?
The median EBITDA Margin % among Construction companies is 9.14, based on 1,770 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. National Fittings's current EBITDA Margin % of 20.74% is 126.9% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on National Fittings and its competitors. For the Construction industry, the median EBITDA Margin % is 9.14 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. National Fittings's current EBITDA Margin % is 20.74%, which is 27% above median its own 10-year median of 16.34. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is National Fittings stock overvalued right now?
Based on GuruFocus' analysis, National Fittings (BOM:531289) is currently considered Fairly Valued. The stock's GF Value™ is ₹164.94, compared to a current price of ₹164.50 — trading 0.3% below its estimated fair value. The current EBITDA Margin % is 20.74%, which is 27% above median its 10-year median of 16.34 and 126.9% above the Construction industry median of 9.14. National Fittings' overall GF Score™ is 77/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For National Fittings (BOM:531289), the current EBITDA Margin % is 20.74% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is National Fittings (BOM:531289) Overvalued in 2026?
Based on GuruFocus' analysis, National Fittings stock appears to be undervalued.
The current stock price of ₹164.50 is trading 0.3% below its estimated GF Value™ of ₹164.94.
GuruFocus considers National Fittings to be Fairly Valued.
Key valuation signals for BOM:531289:
EBITDA Margin %: 20.74% (27% above median its 10-year median of 16.34)
GF Value™: ₹164.94 vs. price of ₹164.50 (0.3% below fair value)
Industry Position: 126.9% above the Construction median (#345 of 1770)
No single metric tells the full story. See the BOM:531289 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
National Fittings Ltd is a manufacturer and sells SG Iron Grooved and Screwed Pipe Fittings, Stainless Pipe Fittings, and Ball Valves for industrial and non-industrial applications. It has only one reportable business segment, which is Manufacturing of Pipe Fittings. Geographically, the company generates a majority of its revenue from exports of its products to other countries and the rest from its customers within India.
77GF Score
Get the complete analysis for BOM:531289
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:531289 has been successfully added to your 
