Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
National FittingsBOM:531289 -1.79%77 Dividend Yield % is 0.61% as of Jul. 19, 2026, which is 51% below its 10-year median of 1.25. GuruFocus rates BOM:531289 with a GF Score™ of 77/100 and a GF Value™ of ₹164.94 (Fairly Valued). The stock has 3 warning signs investors should review. Among 1,014 Construction companies, National Fittings ranks worse than 89.15% on this metric.
As of today (2026-07-19), the Trailing Annual Dividend Yield of National Fittings is 0.61%.
The historical rank and industry rank for National Fittings's Dividend Yield % or its related term are showing as below:
BOM:531289'
s Dividend Yield % Range Over the Past 10 Years
Min: 0.49 Med: 1.25 Max: 7.13
Current: 0.61
During the past 13 years, the highest Dividend Yield of National Fittings was 7.13%. The lowest was 0.49%. And the median was 1.25%.
BOM:531289's Dividend Yield % is ranked worse than 89.15% of 1014
companies
in the Construction industry
Industry Median: 2.8
vs BOM:531289: 0.61
During the past 12 months, National Fittings's average Dividends Per Share Growth Rate was -33.30% per year.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of National Fittings was 26.00% per year. The lowest was -20.60% per year. And the median was 0.00% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
National Fittings (BOM:531289) Dividend Yield % Explanation
Over the long term, the return from dividends has been a significant contributor to the total returns produced by equity securities. Studies by Elroy Dimson, Paul Marsh, and Mike Staunton of Princeton University (2002) found that a market-oriented portfolio, which included reinvested dividends, would have generated nearly 85 times the wealth generated by the same portfolio relying solely on capital gains.
Dividends may also qualify a lower tax rate for investors.
In dividends investing, Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
National Fittings Dividend Yield % Historical Data
* Premium members only.
The historical data trend for National Fittings's Dividend Yield % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BOM:531289 vs TT, JCI, CARR: Dividend Yield % Comparison
For the Building Products & Equipment subindustry, National Fittings's Dividend Yield %, along with its competitors' market caps and Dividend Yield % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
National Fittings Dividend Yield % vs Construction Industry
For the Construction industry and Industrials sector, National Fittings's Dividend Yield % distribution charts can be found below:
* The bar in red indicates where National Fittings's Dividend Yield % falls into.
Dividend Yield measures how much a company pays out in dividends each year relative to its share price.
National Fittings Recent Full-Year* Dividend History
Amount
Ex-date
Record Date
Pay Date
Type
Frequency
Forex Rate
INR 1.000000
2025-09-12
2025-09-13
2025-10-15
Cash Dividend
annually
INR:INR 1.000000
* GuruFocus has an internal rule that if the most recent dividend payment frequency is at least 4 times a year, then the full year will be calculated according to the frequency of payment or the one-year time frame, whichever is stricter.
* GuruFocus converts dividend currency to local traded share price currency in order to calculate dividend yield. Please refer to the last column "Forex Rate" in the above table.
National Fittings's Trailing Annual Dividend Yield (%) for Today is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
National Fittings (BOM:531289) has a Dividend Yield % of 0.61% as of Jul. 19, 2026. Dividend yield is the ratio of company dividends to the share price. View historical data on National Fittings and its competitors. This is 51% below median its historical median of 1.25. Over the past decade, National Fittings' Dividend Yield % has ranged from 0.49 to 7.13. According to the industry distribution chart, National Fittings ranks #904 out of 1014 companies in the Construction industry, placing it in the top 89.2%.
Is National Fittings' Dividend Yield % too high?
National Fittings' current Dividend Yield % of 0.61% is 51% below median its 10-year median of 1.25. Over the past 10 years, this metric has ranged from a low of 0.49 to a high of 7.13. The Construction industry median Dividend Yield % is 2.80. National Fittings' value of 0.61% is 78.2% below this industry median. Based on the distribution chart, National Fittings ranks #904 out of 1014 companies in the Construction industry, which is in the bottom quartile relative to peers. Overall, National Fittings has a GF Score™ of 77/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does National Fittings' Dividend Yield % compare to TT and JCI?
According to the Construction industry distribution chart, National Fittings ranks #904 out of 1014 companies for Dividend Yield %. This places National Fittings in the lower half of its industry. The industry median Dividend Yield % is 2.80. National Fittings' value of 0.61% is 78.2% below this benchmark. Historically, National Fittings' own Dividend Yield % has ranged from 0.49 to 7.13 over the past decade. While the company's 10-year median is 1.25 vs. the industry median of 2.80, National Fittings has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Yield % for a Construction company?
The median Dividend Yield % among Construction companies is 2.80, based on 1,014 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Yield % significantly above this median, while those in the bottom quartile fall well below. However, Dividend Yield % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. National Fittings's current Dividend Yield % of 0.61% is 78.2% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Yield % mean?
A high Dividend Yield % can signal that a stock is expensive relative to its fundamentals. Dividend yield is the ratio of company dividends to the share price. View historical data on National Fittings and its competitors. For the Construction industry, the median Dividend Yield % is 2.80 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. National Fittings's current Dividend Yield % is 0.61%, which is 51% below median its own 10-year median of 1.25. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is National Fittings stock overvalued right now?
Based on GuruFocus' analysis, National Fittings (BOM:531289) is currently considered Fairly Valued. The stock's GF Value™ is ₹164.94, compared to a current price of ₹164.50 — trading 0.3% below its estimated fair value. The current Dividend Yield % is 0.61%, which is 51% below median its 10-year median of 1.25 and 78.2% below the Construction industry median of 2.80. National Fittings' overall GF Score™ is 77/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Yield % calculated?
Dividend Yield % is calculated from a company's financial statements. For National Fittings (BOM:531289), the current Dividend Yield % is 0.61% as of Jul. 19, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is National Fittings (BOM:531289) Overvalued in 2026?
Based on GuruFocus' analysis, National Fittings stock appears to be undervalued.
The current stock price of ₹164.50 is trading 0.3% below its estimated GF Value™ of ₹164.94.
GuruFocus considers National Fittings to be Fairly Valued.
Key valuation signals for BOM:531289:
Dividend Yield %: 0.61% (51% below median its 10-year median of 1.25)
GF Value™: ₹164.94 vs. price of ₹164.50 (0.3% below fair value)
Industry Position: 78.2% below the Construction median (#904 of 1014)
No single metric tells the full story. See the BOM:531289 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
National Fittings Ltd is a manufacturer and sells SG Iron Grooved and Screwed Pipe Fittings, Stainless Pipe Fittings, and Ball Valves for industrial and non-industrial applications. It has only one reportable business segment, which is Manufacturing of Pipe Fittings. Geographically, the company generates a majority of its revenue from exports of its products to other countries and the rest from its customers within India.
77GF Score
Get the complete analysis for BOM:531289
Dividend Yield % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:531289 has been successfully added to your 
