Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Manaksia Coated Metals & Industries EBITDA Margin % Related Terms
Manaksia Coated Metals & Industries EBITDA Margin % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BOM:539046 vs CRS, ATI, MLI: EBITDA Margin % Comparison
For the Metal Fabrication subindustry, Manaksia Coated Metals & Industries's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Manaksia Coated Metals & Industries EBITDA Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Manaksia Coated Metals & Industries's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Manaksia Coated Metals & Industries's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Manaksia Coated Metals & Industries (BOM:539046) has a EBITDA Margin % of 11.10% as of Jun. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Manaksia Coated Metals & Industries and its competitors. This is 54% above median its historical median of 7.19. Over the past decade, Manaksia Coated Metals & Industries' EBITDA Margin % has ranged from 5.28 to 10.33. According to the industry distribution chart, Manaksia Coated Metals & Industries ranks #1439 out of 3041 companies in the Industrial Products industry, placing it in the top 47.3%.
Is Manaksia Coated Metals & Industries' EBITDA Margin % too high?
Manaksia Coated Metals & Industries' current EBITDA Margin % of 11.10% is 54% above median its 10-year median of 7.19. Over the past 10 years, this metric has ranged from a low of 5.28 to a high of 10.33. The Industrial Products industry median EBITDA Margin % is 9.65. Manaksia Coated Metals & Industries' value of 11.10% is 15% above this industry median. Based on the distribution chart, Manaksia Coated Metals & Industries ranks #1439 out of 3041 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Manaksia Coated Metals & Industries has a GF Score™ of 68/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Manaksia Coated Metals & Industries' EBITDA Margin % compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Manaksia Coated Metals & Industries ranks #1439 out of 3041 companies for EBITDA Margin %. This puts Manaksia Coated Metals & Industries in the upper half of its industry. The industry median EBITDA Margin % is 9.65. Manaksia Coated Metals & Industries' value of 11.10% is 15% above this benchmark. Historically, Manaksia Coated Metals & Industries' own EBITDA Margin % has ranged from 5.28 to 10.33 over the past decade. While the company's 10-year median is 7.19 vs. the industry median of 9.65, Manaksia Coated Metals & Industries has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for an Industrial Products company?
The median EBITDA Margin % among Industrial Products companies is 9.65, based on 3,041 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Manaksia Coated Metals & Industries's current EBITDA Margin % of 11.10% is 15% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Manaksia Coated Metals & Industries and its competitors. For the Industrial Products industry, the median EBITDA Margin % is 9.65 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Manaksia Coated Metals & Industries's current EBITDA Margin % is 11.10%, which is 54% above median its own 10-year median of 7.19. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Manaksia Coated Metals & Industries stock overvalued right now?
Based on GuruFocus' analysis, Manaksia Coated Metals & Industries (BOM:539046) is currently considered Significantly Overvalued. The stock's GF Value™ is ₹81.12, compared to a current price of ₹125.80 — trading 55.1% above its estimated fair value. The current EBITDA Margin % is 11.10%, which is 54% above median its 10-year median of 7.19 and 15% above the Industrial Products industry median of 9.65. Manaksia Coated Metals & Industries' overall GF Score™ is 68/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Manaksia Coated Metals & Industries (BOM:539046), the current EBITDA Margin % is 11.10% as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Manaksia Coated Metals & Industries (BOM:539046) Overvalued in 2026?
Based on GuruFocus' analysis, Manaksia Coated Metals & Industries stock appears to be overvalued.
The current stock price of ₹125.80 is trading 55.1% above its estimated GF Value™ of ₹81.12.
GuruFocus considers Manaksia Coated Metals & Industries to be Significantly Overvalued.
Key valuation signals for BOM:539046:
EBITDA Margin %: 11.10% (54% above median its 10-year median of 7.19)
GF Value™: ₹81.12 vs. price of ₹125.80 (55.1% above fair value)
Industry Position: 15% above the Industrial Products median (#1439 of 3041)
No single metric tells the full story. See the BOM:539046 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Manaksia Coated Metals & Industries Ltd is engaged in the manufacturing of Mosquito Repellent Coils and value-added secondary metal products like Galvanised Corrugated Sheets, Galvanised Plain Sheets, Colour-Coated (Pre-painted) Sheets. It operates in two segments including Metal Products; and others. The metal products segment, which is the key revenue driver, includes colour-coated (pre-painted) steel and aluminum sheets and coils. Geographically, it has operations in India as well as overseas. The company's products are Colour Coated Metal Sheets & Coils, Galvanised Steel Sheets & Coils, Mosquito Repellent Coils, Ultramarine Blue Powder, and Agro Products. The company sells products under brands such as Zingalvo, Singham, and Brochures.
68GF Score
Get the complete analysis for BOM:539046
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:539046 has been successfully added to your 
