Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. Manaksia Coated Metals & Industries's Dividend Payout Ratio for the
months ended in Jun. 2026 was 0.00.
The historical rank and industry rank for Manaksia Coated Metals & Industries's Dividend Payout Ratio or its related term are showing as below:
BOM:539046'
s Dividend Payout Ratio Range Over the Past 10 Years
Min: 0.01 Med: 0.02 Max: 0.02
Current: 0.01
During the past 13 years, the highest Dividend Payout Ratio of Manaksia Coated Metals & Industries was 0.02. The lowest was 0.01. And the median was 0.02.
BOM:539046's Dividend Payout Ratio is ranked better than 99.94% of 1732
companies
in the Industrial Products industry
Industry Median: 0.36
vs BOM:539046: 0.01
During the past 13 years, the highest Trailing Annual Dividend Yield of Manaksia Coated Metals & Industries was 0.21%. The lowest was 0.03%. And the median was 0.06%.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Manaksia Coated Metals & Industries was 18.60% per year. The lowest was 18.60% per year. And the median was 18.60% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Manaksia Coated Metals & Industries (BOM:539046) Dividend Payout Ratio Explanation
In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
Manaksia Coated Metals & Industries Dividend Payout Ratio Related Terms
Manaksia Coated Metals & Industries Dividend Payout Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Manaksia Coated Metals & Industries Dividend Payout Ratio Chart
BOM:539046 vs CRS, ATI, MLI: Dividend Payout Ratio Comparison
For the Metal Fabrication subindustry, Manaksia Coated Metals & Industries's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Manaksia Coated Metals & Industries Dividend Payout Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Manaksia Coated Metals & Industries's Dividend Payout Ratio distribution charts can be found below:
* The bar in red indicates where Manaksia Coated Metals & Industries's Dividend Payout Ratio falls into.
Manaksia Coated Metals & Industries Dividend Payout Ratio Calculation
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Manaksia Coated Metals & Industries (BOM:539046) has a Dividend Payout Ratio of 0.00 as of Jun. 2026. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Manaksia Coated Metals & Industries and its competitors. Over the past decade, Manaksia Coated Metals & Industries' Dividend Payout Ratio has ranged from 0.01 to 0.02. According to the industry distribution chart, Manaksia Coated Metals & Industries ranks #1 out of 1732 companies in the Industrial Products industry, placing it in the top 0.099999999999994%.
Is Manaksia Coated Metals & Industries' Dividend Payout Ratio too high?
Manaksia Coated Metals & Industries' current Dividend Payout Ratio is 0.00. Over the past 10 years, this metric has ranged from a low of 0.01 to a high of 0.02. Based on the distribution chart, Manaksia Coated Metals & Industries ranks #1 out of 1732 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Manaksia Coated Metals & Industries has a GF Score™ of 68/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Manaksia Coated Metals & Industries' Dividend Payout Ratio compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Manaksia Coated Metals & Industries ranks #1 out of 1732 companies for Dividend Payout Ratio. This places Manaksia Coated Metals & Industries in the top 0% of its industry — outperforming the majority of peers. The industry median Dividend Payout Ratio is 0.36. Historically, Manaksia Coated Metals & Industries' own Dividend Payout Ratio has ranged from 0.01 to 0.02 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Payout Ratio for an Industrial Products company?
The median Dividend Payout Ratio among Industrial Products companies is 0.36, based on 1,732 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Payout Ratio mean?
A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Manaksia Coated Metals & Industries and its competitors. For the Industrial Products industry, the median Dividend Payout Ratio is 0.36 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Manaksia Coated Metals & Industries's current Dividend Payout Ratio is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Manaksia Coated Metals & Industries stock overvalued right now?
Based on GuruFocus' analysis, Manaksia Coated Metals & Industries (BOM:539046) is currently considered Significantly Overvalued. The stock's GF Value™ is ₹81.12, compared to a current price of ₹125.80 — trading 55.1% above its estimated fair value. The current Dividend Payout Ratio is 0.00. Manaksia Coated Metals & Industries' overall GF Score™ is 68/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Payout Ratio calculated?
Dividend Payout Ratio is calculated from a company's financial statements. For Manaksia Coated Metals & Industries (BOM:539046), the current Dividend Payout Ratio is 0.00 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Manaksia Coated Metals & Industries (BOM:539046) Overvalued in 2026?
Based on GuruFocus' analysis, Manaksia Coated Metals & Industries stock appears to be overvalued.
The current stock price of ₹125.80 is trading 55.1% above its estimated GF Value™ of ₹81.12.
GuruFocus considers Manaksia Coated Metals & Industries to be Significantly Overvalued.
Key valuation signals for BOM:539046:
Dividend Payout Ratio: 0.00
GF Value™: ₹81.12 vs. price of ₹125.80 (55.1% above fair value)
No single metric tells the full story. See the BOM:539046 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Manaksia Coated Metals & Industries Ltd is engaged in the manufacturing of Mosquito Repellent Coils and value-added secondary metal products like Galvanised Corrugated Sheets, Galvanised Plain Sheets, Colour-Coated (Pre-painted) Sheets. It operates in two segments including Metal Products; and others. The metal products segment, which is the key revenue driver, includes colour-coated (pre-painted) steel and aluminum sheets and coils. Geographically, it has operations in India as well as overseas. The company's products are Colour Coated Metal Sheets & Coils, Galvanised Steel Sheets & Coils, Mosquito Repellent Coils, Ultramarine Blue Powder, and Agro Products. The company sells products under brands such as Zingalvo, Singham, and Brochures.
68GF Score
Get the complete analysis for BOM:539046
Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:539046 has been successfully added to your 
