Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Sunita ToolsBOM:544001 -3.14%67 EBITDA Margin % is 16.79% as of Mar. 2026, which is 41% below its 10-year median of 28.42. GuruFocus rates BOM:544001 with a GF Score™ of 67/100 and a GF Value™ of ₹1,056.44 (Fairly Valued). The stock has 8 warning signs investors should review. Among 3,049 Industrial Products companies, Sunita Tools ranks better than 84.39% on this metric.
EBITDA Margin % is calculated as EBITDA divided by its Revenue. Sunita Tools's EBITDA for the
six
months ended in Mar. 2026 was ₹53.1 Mil. Sunita Tools's Revenue for the
six
months ended in Mar. 2026 was ₹316.0 Mil. Therefore, Sunita Tools's EBITDA margin for the quarter that ended in Mar. 2026 was 16.79%.
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Sunita Tools EBITDA Margin % Related Terms
Sunita Tools EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Sunita Tools's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BOM:544001 vs GEV, ETN, PH: EBITDA Margin % Comparison
For the Specialty Industrial Machinery subindustry, Sunita Tools's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Sunita Tools EBITDA Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Sunita Tools's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Sunita Tools's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Sunita Tools (BOM:544001) has a EBITDA Margin % of 16.79% as of Mar. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Sunita Tools and its competitors. This is 41% below median its historical median of 28.42. Over the past decade, Sunita Tools' EBITDA Margin % has ranged from 20.69 to 35.89. According to the industry distribution chart, Sunita Tools ranks #476 out of 3049 companies in the Industrial Products industry, placing it in the top 15.6%.
Is Sunita Tools' EBITDA Margin % too high?
Sunita Tools' current EBITDA Margin % of 16.79% is 41% below median its 10-year median of 28.42. Over the past 10 years, this metric has ranged from a low of 20.69 to a high of 35.89. The Industrial Products industry median EBITDA Margin % is 9.57. Sunita Tools' value of 16.79% is 75.4% above this industry median. Based on the distribution chart, Sunita Tools ranks #476 out of 3049 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Sunita Tools has a GF Score™ of 67/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Sunita Tools' EBITDA Margin % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Sunita Tools ranks #476 out of 3049 companies for EBITDA Margin %. This places Sunita Tools in the top 16% of its industry — outperforming the majority of peers. The industry median EBITDA Margin % is 9.57. Sunita Tools' value of 16.79% is 75.4% above this benchmark. Historically, Sunita Tools' own EBITDA Margin % has ranged from 20.69 to 35.89 over the past decade. While the company's 10-year median is 28.42 vs. the industry median of 9.57, Sunita Tools has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for an Industrial Products company?
The median EBITDA Margin % among Industrial Products companies is 9.57, based on 3,049 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Sunita Tools's current EBITDA Margin % of 16.79% is 75.4% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Sunita Tools and its competitors. For the Industrial Products industry, the median EBITDA Margin % is 9.57 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Sunita Tools's current EBITDA Margin % is 16.79%, which is 41% below median its own 10-year median of 28.42. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Sunita Tools stock overvalued right now?
Based on GuruFocus' analysis, Sunita Tools (BOM:544001) is currently considered Fairly Valued. The stock's GF Value™ is ₹1,056.44, compared to a current price of ₹1,067.25 — trading 1% above its estimated fair value. The current EBITDA Margin % is 16.79%, which is 41% below median its 10-year median of 28.42 and 75.4% above the Industrial Products industry median of 9.57. Sunita Tools' overall GF Score™ is 67/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Sunita Tools (BOM:544001), the current EBITDA Margin % is 16.79% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Sunita Tools (BOM:544001) Overvalued in 2026?
Based on GuruFocus' analysis, Sunita Tools stock appears to be overvalued.
The current stock price of ₹1,067.25 is trading 1% above its estimated GF Value™ of ₹1,056.44.
GuruFocus considers Sunita Tools to be Fairly Valued.
Key valuation signals for BOM:544001:
EBITDA Margin %: 16.79% (41% below median its 10-year median of 28.42)
GF Value™: ₹1,056.44 vs. price of ₹1,067.25 (1% above fair value)
Industry Position: 75.4% above the Industrial Products median (#476 of 3049)
No single metric tells the full story. See the BOM:544001 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Sunita Tools Ltd is an engineering and mould base industry. It manufactures Ground Plates, Mould Bases, and Precision CNC Machining. Company products are a pre-requisite and act as food to the manufacturing industries be it Automotive, Pharmaceutical, Electronics, Consumer Goods, and Manufacturing Sectors.
67GF Score
Get the complete analysis for BOM:544001
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:544001 has been successfully added to your 
