Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Sunita ToolsBOM:544001 -3.14%67 PEG Ratio is 2.62 as of Aug. 30, 2026, which is 24% above its 10-year median of 2.11. GuruFocus rates BOM:544001 with a GF Score™ of 67/100 and a GF Value™ of ₹1,056.44 (Fairly Valued). The stock has 8 warning signs investors should review. Among 1,280 Industrial Products companies, Sunita Tools ranks worse than 64.22% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Sunita Tools's PEG Ratio or its related term are showing as below:
BOM:544001'
s PEG Ratio Range Over the Past 10 Years
Min: 1.66 Med: 2.11 Max: 2.62
Current: 2.62
During the past 6 years, Sunita Tools's highest PEG Ratio was 2.62. The lowest was 1.66. And the median was 2.11.
BOM:544001's PEG Ratio is ranked worse than 64.22% of 1280
companies
in the Industrial Products industry
Industry Median: 1.75
vs BOM:544001: 2.62
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Sunita Tools PEG Ratio Related Terms
Sunita Tools PEG Ratio Historical Data
* Premium members only.
The historical data trend for Sunita Tools's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Sunita Tools's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Sunita Tools PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Sunita Tools's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Sunita Tools's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Sunita Tools (BOM:544001) has a PEG Ratio of 2.62 as of Aug. 30, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Sunita Tools and its competitors. This is 24% above median its historical median of 2.11. Over the past decade, Sunita Tools' PEG Ratio has ranged from 1.66 to 2.62. According to the industry distribution chart, Sunita Tools ranks #822 out of 1280 companies in the Industrial Products industry, placing it in the top 64.2%.
Is Sunita Tools' PEG Ratio too high?
Sunita Tools' current PEG Ratio of 2.62 is 24% above median its 10-year median of 2.11. Over the past 10 years, this metric has ranged from a low of 1.66 to a high of 2.62. The Industrial Products industry median PEG Ratio is 1.75. Sunita Tools' value of 2.62 is 49.7% above this industry median. Based on the distribution chart, Sunita Tools ranks #822 out of 1280 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Sunita Tools has a GF Score™ of 67/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Sunita Tools' PEG Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Sunita Tools ranks #822 out of 1280 companies for PEG Ratio. This places Sunita Tools in the lower half of its industry. The industry median PEG Ratio is 1.75. Sunita Tools' value of 2.62 is 49.7% above this benchmark. Historically, Sunita Tools' own PEG Ratio has ranged from 1.66 to 2.62 over the past decade. While the company's 10-year median is 2.11 vs. the industry median of 1.75, Sunita Tools has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.75, based on 1,280 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Sunita Tools's current PEG Ratio of 2.62 is 49.7% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Sunita Tools and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.75 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Sunita Tools's current PEG Ratio is 2.62, which is 24% above median its own 10-year median of 2.11. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Sunita Tools stock overvalued right now?
Based on GuruFocus' analysis, Sunita Tools (BOM:544001) is currently considered Fairly Valued. The stock's GF Value™ is ₹1,056.44, compared to a current price of ₹1,067.25 — trading 1% above its estimated fair value. The current PEG Ratio is 2.62, which is 24% above median its 10-year median of 2.11 and 49.7% above the Industrial Products industry median of 1.75. Sunita Tools' overall GF Score™ is 67/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Sunita Tools (BOM:544001), the current PEG Ratio is 2.62 as of Aug. 30, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Sunita Tools (BOM:544001) Overvalued in 2026?
Based on GuruFocus' analysis, Sunita Tools stock appears to be overvalued.
The current stock price of ₹1,067.25 is trading 1% above its estimated GF Value™ of ₹1,056.44.
GuruFocus considers Sunita Tools to be Fairly Valued.
Key valuation signals for BOM:544001:
PEG Ratio: 2.62 (24% above median its 10-year median of 2.11)
GF Value™: ₹1,056.44 vs. price of ₹1,067.25 (1% above fair value)
Industry Position: 49.7% above the Industrial Products median (#822 of 1280)
No single metric tells the full story. See the BOM:544001 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Sunita Tools Ltd is an engineering and mould base industry. It manufactures Ground Plates, Mould Bases, and Precision CNC Machining. Company products are a pre-requisite and act as food to the manufacturing industries be it Automotive, Pharmaceutical, Electronics, Consumer Goods, and Manufacturing Sectors.
67GF Score
Get the complete analysis for BOM:544001
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:544001 has been successfully added to your 
