Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Showa Manufacturing CoFSE:5953 -0.58%52 EBITDA Margin % is 20.07% as of Mar. 2026, which is 275% above its 10-year median of 5.35. GuruFocus rates FSE:5953 with a GF Score™ of 52/100 and a GF Value™ of 円3,411.59 (Significantly Overvalued). The stock has 3 warning signs investors should review. Among 2,475 Hardware companies, Showa Manufacturing Co ranks better than 69.54% on this metric.
Showa Manufacturing Co (FSE:5953) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Showa Manufacturing Co EBITDA Margin % Related Terms
Showa Manufacturing Co EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Showa Manufacturing Co's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
FSE:5953 vs APH, GLW, TEL: EBITDA Margin % Comparison
For the Electronic Components subindustry, Showa Manufacturing Co's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Showa Manufacturing Co EBITDA Margin % vs Hardware Industry
For the Hardware industry and Technology sector, Showa Manufacturing Co's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Showa Manufacturing Co's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Showa Manufacturing Co (FSE:5953) has a EBITDA Margin % of 20.07% as of Mar. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Showa Manufacturing Co and its competitors. This is 275% above median its historical median of 5.35. Over the past decade, Showa Manufacturing Co's EBITDA Margin % has ranged from 3.01 to 13.60. According to the industry distribution chart, Showa Manufacturing Co ranks #754 out of 2475 companies in the Hardware industry, placing it in the top 30.5%.
Is Showa Manufacturing Co's EBITDA Margin % too high?
Showa Manufacturing Co's current EBITDA Margin % of 20.07% is 275% above median its 10-year median of 5.35. Over the past 10 years, this metric has ranged from a low of 3.01 to a high of 13.60. The Hardware industry median EBITDA Margin % is 7.29. Showa Manufacturing Co's value of 20.07% is 175.3% above this industry median. Based on the distribution chart, Showa Manufacturing Co ranks #754 out of 2475 companies in the Hardware industry, which is above the industry midpoint. Overall, Showa Manufacturing Co has a GF Score™ of 52/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Showa Manufacturing Co's EBITDA Margin % compare to APH and GLW?
According to the Hardware industry distribution chart, Showa Manufacturing Co ranks #754 out of 2475 companies for EBITDA Margin %. This puts Showa Manufacturing Co in the upper half of its industry. The industry median EBITDA Margin % is 7.29. Showa Manufacturing Co's value of 20.07% is 175.3% above this benchmark. Historically, Showa Manufacturing Co's own EBITDA Margin % has ranged from 3.01 to 13.60 over the past decade. While the company's 10-year median is 5.35 vs. the industry median of 7.29, Showa Manufacturing Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for a Hardware company?
The median EBITDA Margin % among Hardware companies is 7.29, based on 2,475 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Showa Manufacturing Co's current EBITDA Margin % of 20.07% is 175.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Showa Manufacturing Co and its competitors. For the Hardware industry, the median EBITDA Margin % is 7.29 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Showa Manufacturing Co's current EBITDA Margin % is 20.07%, which is 275% above median its own 10-year median of 5.35. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Showa Manufacturing Co stock overvalued right now?
Based on GuruFocus' analysis, Showa Manufacturing Co (FSE:5953) is currently considered Significantly Overvalued. The stock's GF Value™ is 円3,411.59, compared to a current price of 円6,910.00 — trading 102.5% above its estimated fair value. The current EBITDA Margin % is 20.07%, which is 275% above median its 10-year median of 5.35 and 175.3% above the Hardware industry median of 7.29. Showa Manufacturing Co's overall GF Score™ is 52/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Showa Manufacturing Co (FSE:5953), the current EBITDA Margin % is 20.07% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Showa Manufacturing Co (FSE:5953) Overvalued in 2026?
Based on GuruFocus' analysis, Showa Manufacturing Co stock appears to be overvalued.
The current stock price of 円6,910.00 is trading 102.5% above its estimated GF Value™ of 円3,411.59.
GuruFocus considers Showa Manufacturing Co to be Significantly Overvalued.
Key valuation signals for FSE:5953:
EBITDA Margin %: 20.07% (275% above median its 10-year median of 5.35)
GF Value™: 円3,411.59 vs. price of 円6,910.00 (102.5% above fair value)
Industry Position: 175.3% above the Hardware median (#754 of 2475)
No single metric tells the full story. See the FSE:5953 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Showa Manufacturing Co Ltd manufactures and sales heat source and hot water supply products. It also provides air conditioning, environmental products, casting products, and special heat source products. Casting products include boilers which are used in jet engine parts and nuclear reactor parts, general machinery, automobiles. Special heat source product includes high-clean heat treatment furnace and ultra-thin electric heater which performs drying, baking, and annealing of PDP, LCD, OLED. The company has three reportable segments: Materials Processing Business, Materials Processing Business, and Service Engineering Business.
52GF Score
Get the complete analysis for FSE:5953
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
FSE:5953 has been successfully added to your 
