Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Winson Machinery CoROCO:4538 +0.54%75 EBITDA Margin % is 13.59% as of Dec. 2025, which is 38% below its 10-year median of 21.98. GuruFocus rates ROCO:4538 with a GF Score™ of 75/100 and a GF Value™ of NT$17.46 (Fairly Valued). The stock has 5 warning signs investors should review. Among 3,031 Industrial Products companies, Winson Machinery Co ranks better than 70.47% on this metric.
EBITDA Margin % is calculated as EBITDA divided by its Revenue. Winson Machinery Co's EBITDA for the
three
months ended in Dec. 2025 was NT$13.8 Mil. Winson Machinery Co's Revenue for the
three
months ended in Dec. 2025 was NT$101.6 Mil. Therefore, Winson Machinery Co's EBITDA margin for the quarter that ended in Dec. 2025 was 13.59%.
Winson Machinery Co (ROCO:4538) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Winson Machinery Co EBITDA Margin % Related Terms
Winson Machinery Co EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Winson Machinery Co's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ROCO:4538 vs CRS, ATI, MLI: EBITDA Margin % Comparison
For the Metal Fabrication subindustry, Winson Machinery Co's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Winson Machinery Co EBITDA Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Winson Machinery Co's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Winson Machinery Co's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Winson Machinery Co (ROCO:4538) has a EBITDA Margin % of 13.59% as of Dec. 2025. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Winson Machinery Co and its competitors. This is 38% below median its historical median of 21.98. Over the past decade, Winson Machinery Co's EBITDA Margin % has ranged from 13.83 to 25.53. According to the industry distribution chart, Winson Machinery Co ranks #895 out of 3031 companies in the Industrial Products industry, placing it in the top 29.5%.
Is Winson Machinery Co's EBITDA Margin % too high?
Winson Machinery Co's current EBITDA Margin % of 13.59% is 38% below median its 10-year median of 21.98. Over the past 10 years, this metric has ranged from a low of 13.83 to a high of 25.53. The Industrial Products industry median EBITDA Margin % is 9.42. Winson Machinery Co's value of 13.59% is 44.3% above this industry median. Based on the distribution chart, Winson Machinery Co ranks #895 out of 3031 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Winson Machinery Co has a GF Score™ of 75/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Winson Machinery Co's EBITDA Margin % compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Winson Machinery Co ranks #895 out of 3031 companies for EBITDA Margin %. This puts Winson Machinery Co in the upper half of its industry. The industry median EBITDA Margin % is 9.42. Winson Machinery Co's value of 13.59% is 44.3% above this benchmark. Historically, Winson Machinery Co's own EBITDA Margin % has ranged from 13.83 to 25.53 over the past decade. While the company's 10-year median is 21.98 vs. the industry median of 9.42, Winson Machinery Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for an Industrial Products company?
The median EBITDA Margin % among Industrial Products companies is 9.42, based on 3,031 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Winson Machinery Co's current EBITDA Margin % of 13.59% is 44.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Winson Machinery Co and its competitors. For the Industrial Products industry, the median EBITDA Margin % is 9.42 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Winson Machinery Co's current EBITDA Margin % is 13.59%, which is 38% below median its own 10-year median of 21.98. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Winson Machinery Co stock overvalued right now?
Based on GuruFocus' analysis, Winson Machinery Co (ROCO:4538) is currently considered Fairly Valued. The stock's GF Value™ is NT$17.46, compared to a current price of NT$18.60 — trading 6.5% above its estimated fair value. The current EBITDA Margin % is 13.59%, which is 38% below median its 10-year median of 21.98 and 44.3% above the Industrial Products industry median of 9.42. Winson Machinery Co's overall GF Score™ is 75/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Winson Machinery Co (ROCO:4538), the current EBITDA Margin % is 13.59% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Winson Machinery Co (ROCO:4538) Overvalued in 2026?
Based on GuruFocus' analysis, Winson Machinery Co stock appears to be overvalued.
The current stock price of NT$18.60 is trading 6.5% above its estimated GF Value™ of NT$17.46.
GuruFocus considers Winson Machinery Co to be Fairly Valued.
Key valuation signals for ROCO:4538:
EBITDA Margin %: 13.59% (38% below median its 10-year median of 21.98)
GF Value™: NT$17.46 vs. price of NT$18.60 (6.5% above fair value)
Industry Position: 44.3% above the Industrial Products median (#895 of 3031)
No single metric tells the full story. See the ROCO:4538 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Winson Machinery Co Ltd is a Taiwan-based company specialized in large machine tool castings, ductile iron, and grey iron castings. It offers products such as beds for grinding M/C, heads for vertical milling M/C, beds for slant lathe, bed for lathe M/C, beams, tables, beds for CNC lathes, and others. The company also offers production equipment such as module furan sand mixer, induction furnace, casting ladle, 6-ton induction furnace, vertical sand blasting machine, and annealing furnace.
75GF Score
Get the complete analysis for ROCO:4538
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:4538 has been successfully added to your 
