Koge Micro Tech CoROCO:4568 85 EBITDA Margin % is 15.90% as of Dec. 2025, which is 21% below its 10-year median of 20.13. GuruFocus rates ROCO:4568 with a GF Score™ of 85/100 and a GF Value™ of NT$57.19 (Modestly Undervalued). The stock has 4 warning signs investors should review. Among 3,039 Industrial Products companies, Koge Micro Tech Co ranks better than 60.88% on this metric.
EBITDA Margin % is calculated as EBITDA divided by its Revenue. Koge Micro Tech Co's EBITDA for the
three
months ended in Dec. 2025 was NT$54 Mil. Koge Micro Tech Co's Revenue for the
three
months ended in Dec. 2025 was NT$337 Mil. Therefore, Koge Micro Tech Co's EBITDA margin for the quarter that ended in Dec. 2025 was 15.90%.
Koge Micro Tech Co (ROCO:4568) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Koge Micro Tech Co EBITDA Margin % Related Terms
Koge Micro Tech Co EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Koge Micro Tech Co's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ROCO:4568 vs GEV, ETN, PH: EBITDA Margin % Comparison
For the Specialty Industrial Machinery subindustry, Koge Micro Tech Co's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Koge Micro Tech Co EBITDA Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Koge Micro Tech Co's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Koge Micro Tech Co's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Koge Micro Tech Co (ROCO:4568) has a EBITDA Margin % of 15.90% as of Dec. 2025. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Koge Micro Tech Co and its competitors. This is 21% below median its historical median of 20.13. Over the past decade, Koge Micro Tech Co's EBITDA Margin % has ranged from 10.53 to 26.09. According to the industry distribution chart, Koge Micro Tech Co ranks #1189 out of 3039 companies in the Industrial Products industry, placing it in the top 39.1%.
Is Koge Micro Tech Co's EBITDA Margin % too high?
Koge Micro Tech Co's current EBITDA Margin % of 15.90% is 21% below median its 10-year median of 20.13. Over the past 10 years, this metric has ranged from a low of 10.53 to a high of 26.09. The Industrial Products industry median EBITDA Margin % is 9.45. Koge Micro Tech Co's value of 15.90% is 68.3% above this industry median. Based on the distribution chart, Koge Micro Tech Co ranks #1189 out of 3039 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Koge Micro Tech Co has a GF Score™ of 85/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Koge Micro Tech Co's EBITDA Margin % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Koge Micro Tech Co ranks #1189 out of 3039 companies for EBITDA Margin %. This puts Koge Micro Tech Co in the upper half of its industry. The industry median EBITDA Margin % is 9.45. Koge Micro Tech Co's value of 15.90% is 68.3% above this benchmark. Historically, Koge Micro Tech Co's own EBITDA Margin % has ranged from 10.53 to 26.09 over the past decade. While the company's 10-year median is 20.13 vs. the industry median of 9.45, Koge Micro Tech Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for an Industrial Products company?
The median EBITDA Margin % among Industrial Products companies is 9.45, based on 3,039 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Koge Micro Tech Co's current EBITDA Margin % of 15.90% is 68.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Koge Micro Tech Co and its competitors. For the Industrial Products industry, the median EBITDA Margin % is 9.45 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Koge Micro Tech Co's current EBITDA Margin % is 15.90%, which is 21% below median its own 10-year median of 20.13. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Koge Micro Tech Co stock overvalued right now?
Based on GuruFocus' analysis, Koge Micro Tech Co (ROCO:4568) is currently considered Modestly Undervalued. The stock's GF Value™ is NT$57.19, compared to a current price of NT$41.80 — trading 26.9% below its estimated fair value. The current EBITDA Margin % is 15.90%, which is 21% below median its 10-year median of 20.13 and 68.3% above the Industrial Products industry median of 9.45. Koge Micro Tech Co's overall GF Score™ is 85/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Koge Micro Tech Co (ROCO:4568), the current EBITDA Margin % is 15.90% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Koge Micro Tech Co (ROCO:4568) Overvalued in 2026?
Based on GuruFocus' analysis, Koge Micro Tech Co stock appears to be undervalued.
The current stock price of NT$41.80 is trading 26.9% below its estimated GF Value™ of NT$57.19.
GuruFocus considers Koge Micro Tech Co to be Modestly Undervalued.
Key valuation signals for ROCO:4568:
EBITDA Margin %: 15.90% (21% below median its 10-year median of 20.13)
GF Value™: NT$57.19 vs. price of NT$41.80 (26.9% below fair value)
Industry Position: 68.3% above the Industrial Products median (#1189 of 3039)
No single metric tells the full story. See the ROCO:4568 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Koge Micro Tech Co Ltd is a Taiwan-based company engaged in the business of manufacturing precision pumps and valves. It engages in designing and producing different types of precision pumps and valves including air pumps, vacuum pumps, water pumps, gear pumps, and electromagnetic pumps; one-way solenoid valves, two-way solenoid valves, three-way solenoid valves, combined-type solenoid valves, linear-type solenoid valve and solenoid valves. The group's products are used and sold in fuel cells, energy and environment, environmental monitoring, detection analysis, medical devices, automotive products, healthcare equipment, beauty care apparatus, and household appliance fields.
85GF Score
Get the complete analysis for ROCO:4568
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:4568 has been successfully added to your 
