Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Plastron Presicion CoROCO:6185 -1.38%61 EBITDA Margin % is 33.61% as of Dec. 2025, which is 35% above its 10-year median of 24.86. GuruFocus rates ROCO:6185 with a GF Score™ of 61/100 and a GF Value™ of NT$16.71 (Modestly Undervalued). The stock has 4 warning signs investors should review. Among 2,479 Hardware companies, Plastron Presicion Co ranks better than 93.38% on this metric.
Plastron Presicion Co (ROCO:6185) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Plastron Presicion Co EBITDA Margin % Related Terms
Plastron Presicion Co EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Plastron Presicion Co's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Electronic Components subindustry, Plastron Presicion Co's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Plastron Presicion Co EBITDA Margin % vs Hardware Industry
For the Hardware industry and Technology sector, Plastron Presicion Co's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Plastron Presicion Co's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Plastron Presicion Co (ROCO:6185) has a EBITDA Margin % of 33.61% as of Dec. 2025. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Plastron Presicion Co and its competitors. This is 35% above median its historical median of 24.86. Over the past decade, Plastron Presicion Co's EBITDA Margin % has ranged from 1.81 to 41.63. According to the industry distribution chart, Plastron Presicion Co ranks #164 out of 2479 companies in the Hardware industry, placing it in the top 6.6%.
Is Plastron Presicion Co's EBITDA Margin % too high?
Plastron Presicion Co's current EBITDA Margin % of 33.61% is 35% above median its 10-year median of 24.86. Over the past 10 years, this metric has ranged from a low of 1.81 to a high of 41.63. The Hardware industry median EBITDA Margin % is 7.01. Plastron Presicion Co's value of 33.61% is 379.5% above this industry median. Based on the distribution chart, Plastron Presicion Co ranks #164 out of 2479 companies in the Hardware industry, which is in the top quartile — a strong position relative to peers. Overall, Plastron Presicion Co has a GF Score™ of 61/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Plastron Presicion Co's EBITDA Margin % compare to APH and GLW?
According to the Hardware industry distribution chart, Plastron Presicion Co ranks #164 out of 2479 companies for EBITDA Margin %. This places Plastron Presicion Co in the top 7% of its industry — outperforming the majority of peers. The industry median EBITDA Margin % is 7.01. Plastron Presicion Co's value of 33.61% is 379.5% above this benchmark. Historically, Plastron Presicion Co's own EBITDA Margin % has ranged from 1.81 to 41.63 over the past decade. While the company's 10-year median is 24.86 vs. the industry median of 7.01, Plastron Presicion Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for a Hardware company?
The median EBITDA Margin % among Hardware companies is 7.01, based on 2,479 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Plastron Presicion Co's current EBITDA Margin % of 33.61% is 379.5% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Plastron Presicion Co and its competitors. For the Hardware industry, the median EBITDA Margin % is 7.01 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Plastron Presicion Co's current EBITDA Margin % is 33.61%, which is 35% above median its own 10-year median of 24.86. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Plastron Presicion Co stock overvalued right now?
Based on GuruFocus' analysis, Plastron Presicion Co (ROCO:6185) is currently considered Modestly Undervalued. The stock's GF Value™ is NT$16.71, compared to a current price of NT$14.30 — trading 14.4% below its estimated fair value. The current EBITDA Margin % is 33.61%, which is 35% above median its 10-year median of 24.86 and 379.5% above the Hardware industry median of 7.01. Plastron Presicion Co's overall GF Score™ is 61/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Plastron Presicion Co (ROCO:6185), the current EBITDA Margin % is 33.61% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Plastron Presicion Co (ROCO:6185) Overvalued in 2026?
Based on GuruFocus' analysis, Plastron Presicion Co stock appears to be undervalued.
The current stock price of NT$14.30 is trading 14.4% below its estimated GF Value™ of NT$16.71.
GuruFocus considers Plastron Presicion Co to be Modestly Undervalued.
Key valuation signals for ROCO:6185:
EBITDA Margin %: 33.61% (35% above median its 10-year median of 24.86)
GF Value™: NT$16.71 vs. price of NT$14.30 (14.4% below fair value)
Industry Position: 379.5% above the Hardware median (#164 of 2479)
No single metric tells the full story. See the ROCO:6185 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Plastron Presicion Co Ltd develops, manufactures, and sells different board-to-board connectors. It offers board-to-board connectors, memory cards, FFC series products, and HDMI & DVI products high-frequency connectors, I/O transmission connectors, and other custom-made connectors. Geographically, it operates in Taiwan, Germany, PRC, and Others.
61GF Score
Get the complete analysis for ROCO:6185
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:6185 has been successfully added to your 
