Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Yantai Eddie Precision Machinery Co (SHSE:603638) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Yantai Eddie Precision Machinery Co EBITDA Margin % Related Terms
Yantai Eddie Precision Machinery Co EBITDA Margin % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Yantai Eddie Precision Machinery Co EBITDA Margin % Chart
SHSE:603638 vs GEV, ETN, PH: EBITDA Margin % Comparison
For the Specialty Industrial Machinery subindustry, Yantai Eddie Precision Machinery Co's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Yantai Eddie Precision Machinery Co EBITDA Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Yantai Eddie Precision Machinery Co's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Yantai Eddie Precision Machinery Co's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Yantai Eddie Precision Machinery Co (SHSE:603638) has a EBITDA Margin % of 17.43% as of Mar. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Yantai Eddie Precision Machinery Co and its competitors. This is 41% below median its historical median of 29.42. Over the past decade, Yantai Eddie Precision Machinery Co's EBITDA Margin % has ranged from 16.82 to 34.53. According to the industry distribution chart, Yantai Eddie Precision Machinery Co ranks #698 out of 3036 companies in the Industrial Products industry, placing it in the top 23%.
Is Yantai Eddie Precision Machinery Co's EBITDA Margin % too high?
Yantai Eddie Precision Machinery Co's current EBITDA Margin % of 17.43% is 41% below median its 10-year median of 29.42. Over the past 10 years, this metric has ranged from a low of 16.82 to a high of 34.53. The Industrial Products industry median EBITDA Margin % is 9.46. Yantai Eddie Precision Machinery Co's value of 17.43% is 84.2% above this industry median. Based on the distribution chart, Yantai Eddie Precision Machinery Co ranks #698 out of 3036 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Yantai Eddie Precision Machinery Co has a GF Score™ of 82/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Yantai Eddie Precision Machinery Co's EBITDA Margin % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Yantai Eddie Precision Machinery Co ranks #698 out of 3036 companies for EBITDA Margin %. This places Yantai Eddie Precision Machinery Co in the top 23% of its industry — outperforming the majority of peers. The industry median EBITDA Margin % is 9.46. Yantai Eddie Precision Machinery Co's value of 17.43% is 84.2% above this benchmark. Historically, Yantai Eddie Precision Machinery Co's own EBITDA Margin % has ranged from 16.82 to 34.53 over the past decade. While the company's 10-year median is 29.42 vs. the industry median of 9.46, Yantai Eddie Precision Machinery Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for an Industrial Products company?
The median EBITDA Margin % among Industrial Products companies is 9.46, based on 3,036 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Yantai Eddie Precision Machinery Co's current EBITDA Margin % of 17.43% is 84.2% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Yantai Eddie Precision Machinery Co and its competitors. For the Industrial Products industry, the median EBITDA Margin % is 9.46 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Yantai Eddie Precision Machinery Co's current EBITDA Margin % is 17.43%, which is 41% below median its own 10-year median of 29.42. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Yantai Eddie Precision Machinery Co stock overvalued right now?
Based on GuruFocus' analysis, Yantai Eddie Precision Machinery Co (SHSE:603638) is currently considered Modestly Undervalued. The stock's GF Value™ is ¥25.41, compared to a current price of ¥19.41 — trading 23.6% below its estimated fair value. The current EBITDA Margin % is 17.43%, which is 41% below median its 10-year median of 29.42 and 84.2% above the Industrial Products industry median of 9.46. Yantai Eddie Precision Machinery Co's overall GF Score™ is 82/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Yantai Eddie Precision Machinery Co (SHSE:603638), the current EBITDA Margin % is 17.43% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Yantai Eddie Precision Machinery Co (SHSE:603638) Overvalued in 2026?
Based on GuruFocus' analysis, Yantai Eddie Precision Machinery Co stock appears to be undervalued.
The current stock price of ¥19.41 is trading 23.6% below its estimated GF Value™ of ¥25.41.
GuruFocus considers Yantai Eddie Precision Machinery Co to be Modestly Undervalued.
Key valuation signals for SHSE:603638:
EBITDA Margin %: 17.43% (41% below median its 10-year median of 29.42)
GF Value™: ¥25.41 vs. price of ¥19.41 (23.6% below fair value)
Industry Position: 84.2% above the Industrial Products median (#698 of 3036)
No single metric tells the full story. See the SHSE:603638 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Yantai Eddie Precision Machinery Co Business Description
Yantai Eddie Precision Machinery Co Ltd is a China based manufacturer of hydraulic breaker and related equipment. It develops, produces and sells hydraulic breaker, quick coupler, high-frequency vibration breaker, hydraulic shear, hydraulic crusher, stone grapple, log grapple and other attachments for construction machinery. The company sells its products in China, and also exports it to the various other countries.
82GF Score
Get the complete analysis for SHSE:603638
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:603638 has been successfully added to your 
