Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
SHSE:603638's PB Ratio is ranked worse than 73.75% of 2991
companies
in the Industrial Products industry
Industry Median: 2.21
vs SHSE:603638: 4.12
During the past 12 months, Yantai Eddie Precision Machinery Co's average Book Value Per Share Growth Rate was 8.40% per year.
During the past 3 years, the average Book Value Per Share Growth Rate was 6.00% per year.
During the past 5 years, the average Book Value Per Share Growth Rate was 8.10% per year.
During the past 10 years, the average Book Value Per Share Growth Rate was 21.80% per year.
During the past 13 years, the highest 3-Year average Book Value Per Share Growth Rate of Yantai Eddie Precision Machinery Co was 40.50% per year. The lowest was -16.50% per year. And the median was 13.40% per year.
The PB Ratio works the best for the businesses that earn most of their profit from their assets, e.g. banks and insurance companies.
Be Aware
Some businesses have very light assets, such as software companies or insurance agencies. The PB Ratio does not work well for these companies. Some companies even have negative equity, so the PB Ratio cannot be applied to them.
Yantai Eddie Precision Machinery Co PB Ratio Related Terms
Yantai Eddie Precision Machinery Co PB Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Yantai Eddie Precision Machinery Co PB Ratio Chart
For the Specialty Industrial Machinery subindustry, Yantai Eddie Precision Machinery Co's PB Ratio, along with its competitors' market caps and PB Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Yantai Eddie Precision Machinery Co PB Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Yantai Eddie Precision Machinery Co's PB Ratio distribution charts can be found below:
* The bar in red indicates where Yantai Eddie Precision Machinery Co's PB Ratio falls into.
Yantai Eddie Precision Machinery Co PB Ratio Calculation
The PB Ratio, or Price-to-Book ratio, or Price/Book, is a financial ratio used to compare a company's market price to its Book Value per Share. It is a ratio widely used to value stocks.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
It can also be calculated from the numbers for the whole company:
A closely related ratio is called Price-to-Tangible-Book. The difference between Price-to-Tangible-Book and PB Ratio is that book value other than intangibles are used in the calculation.
Yantai Eddie Precision Machinery Co (SHSE:603638) has a PB Ratio of 4.12 as of Aug. 26, 2026. Price-to-Book ratio is the ratio of share price to a company's book value per share. View historical data on Yantai Eddie Precision Machinery Co and its competitors. This is 34% below median its historical median of 6.26. Over the past decade, Yantai Eddie Precision Machinery Co's PB Ratio has ranged from 3.43 to 21.35. According to the industry distribution chart, Yantai Eddie Precision Machinery Co ranks #2206 out of 2991 companies in the Industrial Products industry, placing it in the top 73.8%.
Is Yantai Eddie Precision Machinery Co's PB Ratio too high?
Yantai Eddie Precision Machinery Co's current PB Ratio of 4.12 is 34% below median its 10-year median of 6.26. Over the past 10 years, this metric has ranged from a low of 3.43 to a high of 21.35. The Industrial Products industry median PB Ratio is 2.21. Yantai Eddie Precision Machinery Co's value of 4.12 is 86.4% above this industry median. Based on the distribution chart, Yantai Eddie Precision Machinery Co ranks #2206 out of 2991 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Yantai Eddie Precision Machinery Co has a GF Score™ of 79/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Yantai Eddie Precision Machinery Co's PB Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Yantai Eddie Precision Machinery Co ranks #2206 out of 2991 companies for PB Ratio. This places Yantai Eddie Precision Machinery Co in the lower half of its industry. The industry median PB Ratio is 2.21. Yantai Eddie Precision Machinery Co's value of 4.12 is 86.4% above this benchmark. Historically, Yantai Eddie Precision Machinery Co's own PB Ratio has ranged from 3.43 to 21.35 over the past decade. While the company's 10-year median is 6.26 vs. the industry median of 2.21, Yantai Eddie Precision Machinery Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PB Ratio for an Industrial Products company?
The median PB Ratio among Industrial Products companies is 2.21, based on 2,991 companies in the industry. Companies in the top quartile (top 25%) have a PB Ratio significantly above this median, while those in the bottom quartile fall well below. However, PB Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Yantai Eddie Precision Machinery Co's current PB Ratio of 4.12 is 86.4% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PB Ratio mean?
A high PB Ratio can signal that a stock is expensive relative to its fundamentals. Price-to-Book ratio is the ratio of share price to a company's book value per share. View historical data on Yantai Eddie Precision Machinery Co and its competitors. For the Industrial Products industry, the median PB Ratio is 2.21 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Yantai Eddie Precision Machinery Co's current PB Ratio is 4.12, which is 34% below median its own 10-year median of 6.26. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Yantai Eddie Precision Machinery Co stock overvalued right now?
Based on GuruFocus' analysis, Yantai Eddie Precision Machinery Co (SHSE:603638) is currently considered Modestly Undervalued. The stock's GF Value™ is ¥25.70, compared to a current price of ¥18.86 — trading 26.6% below its estimated fair value. The current PB Ratio is 4.12, which is 34% below median its 10-year median of 6.26 and 86.4% above the Industrial Products industry median of 2.21. Yantai Eddie Precision Machinery Co's overall GF Score™ is 79/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PB Ratio calculated?
PB Ratio is calculated from a company's financial statements. For Yantai Eddie Precision Machinery Co (SHSE:603638), the current PB Ratio is 4.12 as of Aug. 26, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Yantai Eddie Precision Machinery Co (SHSE:603638) Overvalued in 2026?
Based on GuruFocus' analysis, Yantai Eddie Precision Machinery Co stock appears to be undervalued.
The current stock price of ¥18.86 is trading 26.6% below its estimated GF Value™ of ¥25.70.
GuruFocus considers Yantai Eddie Precision Machinery Co to be Modestly Undervalued.
Key valuation signals for SHSE:603638:
PB Ratio: 4.12 (34% below median its 10-year median of 6.26)
GF Value™: ¥25.70 vs. price of ¥18.86 (26.6% below fair value)
Industry Position: 86.4% above the Industrial Products median (#2206 of 2991)
No single metric tells the full story. See the SHSE:603638 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Yantai Eddie Precision Machinery Co Ltd is a China based manufacturer of hydraulic breaker and related equipment. It develops, produces and sells hydraulic breaker, quick coupler, high-frequency vibration breaker, hydraulic shear, hydraulic crusher, stone grapple, log grapple and other attachments for construction machinery. The company sells its products in China, and also exports it to the various other countries.
79GF Score
Get the complete analysis for SHSE:603638
PB Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:603638 has been successfully added to your 
