Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Dongguan Dingtong Precision Metal Co (SHSE:688668) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Dongguan Dingtong Precision Metal Co EBITDA Margin % Related Terms
Dongguan Dingtong Precision Metal Co EBITDA Margin % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Dongguan Dingtong Precision Metal Co EBITDA Margin % Chart
SHSE:688668 vs VRT, BE: EBITDA Margin % Comparison
For the Electrical Equipment & Parts subindustry, Dongguan Dingtong Precision Metal Co's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Dongguan Dingtong Precision Metal Co EBITDA Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Dongguan Dingtong Precision Metal Co's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Dongguan Dingtong Precision Metal Co's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Dongguan Dingtong Precision Metal Co (SHSE:688668) has a EBITDA Margin % of 19.30% as of Mar. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Dongguan Dingtong Precision Metal Co and its competitors. This is 28% below median its historical median of 26.86. Over the past decade, Dongguan Dingtong Precision Metal Co's EBITDA Margin % has ranged from 17.45 to 32.70. According to the industry distribution chart, Dongguan Dingtong Precision Metal Co ranks #643 out of 3032 companies in the Industrial Products industry, placing it in the top 21.2%.
Is Dongguan Dingtong Precision Metal Co's EBITDA Margin % too high?
Dongguan Dingtong Precision Metal Co's current EBITDA Margin % of 19.30% is 28% below median its 10-year median of 26.86. Over the past 10 years, this metric has ranged from a low of 17.45 to a high of 32.70. The Industrial Products industry median EBITDA Margin % is 9.46. Dongguan Dingtong Precision Metal Co's value of 19.30% is 104.1% above this industry median. Based on the distribution chart, Dongguan Dingtong Precision Metal Co ranks #643 out of 3032 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Dongguan Dingtong Precision Metal Co has a GF Score™ of 75/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Dongguan Dingtong Precision Metal Co's EBITDA Margin % compare to VRT and BE?
According to the Industrial Products industry distribution chart, Dongguan Dingtong Precision Metal Co ranks #643 out of 3032 companies for EBITDA Margin %. This places Dongguan Dingtong Precision Metal Co in the top 21% of its industry — outperforming the majority of peers. The industry median EBITDA Margin % is 9.46. Dongguan Dingtong Precision Metal Co's value of 19.30% is 104.1% above this benchmark. Historically, Dongguan Dingtong Precision Metal Co's own EBITDA Margin % has ranged from 17.45 to 32.70 over the past decade. While the company's 10-year median is 26.86 vs. the industry median of 9.46, Dongguan Dingtong Precision Metal Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for an Industrial Products company?
The median EBITDA Margin % among Industrial Products companies is 9.46, based on 3,032 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Dongguan Dingtong Precision Metal Co's current EBITDA Margin % of 19.30% is 104.1% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Dongguan Dingtong Precision Metal Co and its competitors. For the Industrial Products industry, the median EBITDA Margin % is 9.46 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Dongguan Dingtong Precision Metal Co's current EBITDA Margin % is 19.30%, which is 28% below median its own 10-year median of 26.86. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Dongguan Dingtong Precision Metal Co stock overvalued right now?
Based on GuruFocus' analysis, Dongguan Dingtong Precision Metal Co (SHSE:688668) is currently considered Significantly Overvalued. The stock's GF Value™ is ¥89.29, compared to a current price of ¥243.46 — trading 172.7% above its estimated fair value. The current EBITDA Margin % is 19.30%, which is 28% below median its 10-year median of 26.86 and 104.1% above the Industrial Products industry median of 9.46. Dongguan Dingtong Precision Metal Co's overall GF Score™ is 75/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Dongguan Dingtong Precision Metal Co (SHSE:688668), the current EBITDA Margin % is 19.30% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Dongguan Dingtong Precision Metal Co (SHSE:688668) Overvalued in 2026?
Based on GuruFocus' analysis, Dongguan Dingtong Precision Metal Co stock appears to be overvalued.
The current stock price of ¥243.46 is trading 172.7% above its estimated GF Value™ of ¥89.29.
GuruFocus considers Dongguan Dingtong Precision Metal Co to be Significantly Overvalued.
Key valuation signals for SHSE:688668:
EBITDA Margin %: 19.30% (28% below median its 10-year median of 26.86)
GF Value™: ¥89.29 vs. price of ¥243.46 (172.7% above fair value)
Industry Position: 104.1% above the Industrial Products median (#643 of 3032)
No single metric tells the full story. See the SHSE:688668 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Dongguan Dingtong Precision Metal Co Business Description
Dongguan Dingtong Precision Metal Co Ltd is focused on the development, production and sales of communication connectors and automotive connectors. The product catalogue of the group includes precision mold, precision mold parts, high-speed communication connectors and automotive connectors.
75GF Score
Get the complete analysis for SHSE:688668
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:688668 has been successfully added to your 
