Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
SHSE:688668's PEG Ratio is ranked worse than 89.35% of 1277
companies
in the Industrial Products industry
Industry Median: 1.76
vs SHSE:688668: 10.66
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Dongguan Dingtong Precision Metal Co (SHSE:688668) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Dongguan Dingtong Precision Metal Co PEG Ratio Related Terms
Dongguan Dingtong Precision Metal Co PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Dongguan Dingtong Precision Metal Co PEG Ratio Chart
For the Electrical Equipment & Parts subindustry, Dongguan Dingtong Precision Metal Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Dongguan Dingtong Precision Metal Co PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Dongguan Dingtong Precision Metal Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Dongguan Dingtong Precision Metal Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Dongguan Dingtong Precision Metal Co (SHSE:688668) has a PEG Ratio of 10.66 as of Jul. 19, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Dongguan Dingtong Precision Metal Co and its competitors. This is 59% below median its historical median of 26.09. Over the past decade, Dongguan Dingtong Precision Metal Co's PEG Ratio has ranged from 5.66 to 67.67. According to the industry distribution chart, Dongguan Dingtong Precision Metal Co ranks #1141 out of 1277 companies in the Industrial Products industry, placing it in the top 89.4%.
Is Dongguan Dingtong Precision Metal Co's PEG Ratio too high?
Dongguan Dingtong Precision Metal Co's current PEG Ratio of 10.66 is 59% below median its 10-year median of 26.09. Over the past 10 years, this metric has ranged from a low of 5.66 to a high of 67.67. The Industrial Products industry median PEG Ratio is 1.76. Dongguan Dingtong Precision Metal Co's value of 10.66 is 505.7% above this industry median. Based on the distribution chart, Dongguan Dingtong Precision Metal Co ranks #1141 out of 1277 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Dongguan Dingtong Precision Metal Co has a GF Score™ of 75/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Dongguan Dingtong Precision Metal Co's PEG Ratio compare to VRT and BE?
According to the Industrial Products industry distribution chart, Dongguan Dingtong Precision Metal Co ranks #1141 out of 1277 companies for PEG Ratio. This places Dongguan Dingtong Precision Metal Co in the lower half of its industry. The industry median PEG Ratio is 1.76. Dongguan Dingtong Precision Metal Co's value of 10.66 is 505.7% above this benchmark. Historically, Dongguan Dingtong Precision Metal Co's own PEG Ratio has ranged from 5.66 to 67.67 over the past decade. While the company's 10-year median is 26.09 vs. the industry median of 1.76, Dongguan Dingtong Precision Metal Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.76, based on 1,277 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Dongguan Dingtong Precision Metal Co's current PEG Ratio of 10.66 is 505.7% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Dongguan Dingtong Precision Metal Co and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.76 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Dongguan Dingtong Precision Metal Co's current PEG Ratio is 10.66, which is 59% below median its own 10-year median of 26.09. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Dongguan Dingtong Precision Metal Co stock overvalued right now?
Based on GuruFocus' analysis, Dongguan Dingtong Precision Metal Co (SHSE:688668) is currently considered Significantly Overvalued. The stock's GF Value™ is ¥89.29, compared to a current price of ¥243.46 — trading 172.7% above its estimated fair value. The current PEG Ratio is 10.66, which is 59% below median its 10-year median of 26.09 and 505.7% above the Industrial Products industry median of 1.76. Dongguan Dingtong Precision Metal Co's overall GF Score™ is 75/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Dongguan Dingtong Precision Metal Co (SHSE:688668), the current PEG Ratio is 10.66 as of Jul. 19, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Dongguan Dingtong Precision Metal Co (SHSE:688668) Overvalued in 2026?
Based on GuruFocus' analysis, Dongguan Dingtong Precision Metal Co stock appears to be overvalued.
The current stock price of ¥243.46 is trading 172.7% above its estimated GF Value™ of ¥89.29.
GuruFocus considers Dongguan Dingtong Precision Metal Co to be Significantly Overvalued.
Key valuation signals for SHSE:688668:
PEG Ratio: 10.66 (59% below median its 10-year median of 26.09)
GF Value™: ¥89.29 vs. price of ¥243.46 (172.7% above fair value)
Industry Position: 505.7% above the Industrial Products median (#1141 of 1277)
No single metric tells the full story. See the SHSE:688668 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Dongguan Dingtong Precision Metal Co Business Description
Dongguan Dingtong Precision Metal Co Ltd is focused on the development, production and sales of communication connectors and automotive connectors. The product catalogue of the group includes precision mold, precision mold parts, high-speed communication connectors and automotive connectors.
75GF Score
Get the complete analysis for SHSE:688668
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:688668 has been successfully added to your 
