Nam Kim Steel JSCSTC:NKG 75 EBITDA Margin % is 5.10% as of Mar. 2026, which is 8% below its 10-year median of 5.56. GuruFocus rates STC:NKG with a GF Score™ of 75/100 and a GF Value™ of ₫9,341.43 (Modestly Overvalued). The stock has 7 warning signs investors should review. Among 616 Steel companies, Nam Kim Steel JSC ranks worse than 53.08% on this metric.
EBITDA Margin % is calculated as EBITDA divided by its Revenue. Nam Kim Steel JSC's EBITDA for the
three
months ended in Mar. 2026 was ₫166,192 Mil. Nam Kim Steel JSC's Revenue for the
three
months ended in Mar. 2026 was ₫3,261,408 Mil. Therefore, Nam Kim Steel JSC's EBITDA margin for the quarter that ended in Mar. 2026 was 5.10%.
Nam Kim Steel JSC (STC:NKG) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Nam Kim Steel JSC EBITDA Margin % Related Terms
Nam Kim Steel JSC EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Nam Kim Steel JSC's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
STC:NKG vs NUE, STLD, RS: EBITDA Margin % Comparison
For the Steel subindustry, Nam Kim Steel JSC's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Nam Kim Steel JSC EBITDA Margin % vs Steel Industry
For the Steel industry and Basic Materials sector, Nam Kim Steel JSC's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Nam Kim Steel JSC's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Nam Kim Steel JSC (STC:NKG) has a EBITDA Margin % of 5.10% as of Mar. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Nam Kim Steel JSC and its competitors. This is near median its historical median of 5.56. Over the past decade, Nam Kim Steel JSC's EBITDA Margin % has ranged from 2.31 to 11.09. According to the industry distribution chart, Nam Kim Steel JSC ranks #327 out of 616 companies in the Steel industry, placing it in the top 53.1%.
Is Nam Kim Steel JSC's EBITDA Margin % too high?
Nam Kim Steel JSC's current EBITDA Margin % of 5.10% is near median its 10-year median of 5.56. Over the past 10 years, this metric has ranged from a low of 2.31 to a high of 11.09. The Steel industry median EBITDA Margin % is 6.18. Nam Kim Steel JSC's value of 5.10% is 17.5% below this industry median. Based on the distribution chart, Nam Kim Steel JSC ranks #327 out of 616 companies in the Steel industry, which is below the industry midpoint. Overall, Nam Kim Steel JSC has a GF Score™ of 75/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Nam Kim Steel JSC's EBITDA Margin % compare to NUE and STLD?
According to the Steel industry distribution chart, Nam Kim Steel JSC ranks #327 out of 616 companies for EBITDA Margin %. This places Nam Kim Steel JSC in the lower half of its industry. The industry median EBITDA Margin % is 6.18. Nam Kim Steel JSC's value of 5.10% is 17.5% below this benchmark. Historically, Nam Kim Steel JSC's own EBITDA Margin % has ranged from 2.31 to 11.09 over the past decade. While the company's 10-year median is 5.56 vs. the industry median of 6.18, Nam Kim Steel JSC has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for a Steel company?
The median EBITDA Margin % among Steel companies is 6.18, based on 616 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Nam Kim Steel JSC's current EBITDA Margin % of 5.10% is 17.5% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Nam Kim Steel JSC and its competitors. For the Steel industry, the median EBITDA Margin % is 6.18 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Nam Kim Steel JSC's current EBITDA Margin % is 5.10%, which is near median its own 10-year median of 5.56. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Nam Kim Steel JSC stock overvalued right now?
Based on GuruFocus' analysis, Nam Kim Steel JSC (STC:NKG) is currently considered Modestly Overvalued. The stock's GF Value™ is ₫9,341.43, compared to a current price of ₫11,850.00 — trading 26.9% above its estimated fair value. The current EBITDA Margin % is 5.10%, which is near median its 10-year median of 5.56 and 17.5% below the Steel industry median of 6.18. Nam Kim Steel JSC's overall GF Score™ is 75/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Nam Kim Steel JSC (STC:NKG), the current EBITDA Margin % is 5.10% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Nam Kim Steel JSC (STC:NKG) Overvalued in 2026?
Based on GuruFocus' analysis, Nam Kim Steel JSC stock appears to be overvalued.
The current stock price of ₫11,850.00 is trading 26.9% above its estimated GF Value™ of ₫9,341.43.
GuruFocus considers Nam Kim Steel JSC to be Modestly Overvalued.
Key valuation signals for STC:NKG:
EBITDA Margin %: 5.10% (near median its 10-year median of 5.56)
GF Value™: ₫9,341.43 vs. price of ₫11,850.00 (26.9% above fair value)
Industry Position: 17.5% below the Steel median (#327 of 616)
No single metric tells the full story. See the STC:NKG stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Nam Kim Steel JSC through its subsidiaries manufactures of other metal products, production of steel tole: galvanized, aluminium-zinc alloy coated, steel sheets (galvalume), steel sheets coated, galvanized coating; Production of iron, steel, cast iron, production of steel pipes, steel and rolled steel products, cold rolled steel, galvanized steel, black steel tape, galvanized steel tape; Wholesale of metals and metals ores, details: wholesale iron and steel; Mechanical processing, handling and metal coating; Trading scrap; and Road transportation services; logistics services, cargo handling services; leasing of transport vehicles and other transport-related support services.
75GF Score
Get the complete analysis for STC:NKG
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
STC:NKG has been successfully added to your 
