Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Wus Printed Circuit CoTPE:2316 +1.93%59 EBITDA Margin % is 73.02% as of Jun. 2026, which is 267% above its 10-year median of 19.87. GuruFocus rates TPE:2316 with a GF Score™ of 59/100 and a GF Value™ of NT$62.58 (Significantly Overvalued). The stock has 1 warning sign investors should review. Among 2,473 Hardware companies, Wus Printed Circuit Co ranks better than 98.91% on this metric.
Wus Printed Circuit Co (TPE:2316) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Wus Printed Circuit Co EBITDA Margin % Related Terms
Wus Printed Circuit Co EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Wus Printed Circuit Co's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TPE:2316 vs APH, GLW, TEL: EBITDA Margin % Comparison
For the Electronic Components subindustry, Wus Printed Circuit Co's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Wus Printed Circuit Co EBITDA Margin % vs Hardware Industry
For the Hardware industry and Technology sector, Wus Printed Circuit Co's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Wus Printed Circuit Co's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Wus Printed Circuit Co (TPE:2316) has a EBITDA Margin % of 73.02% as of Jun. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Wus Printed Circuit Co and its competitors. This is 267% above median its historical median of 19.87. Over the past decade, Wus Printed Circuit Co's EBITDA Margin % has ranged from 6.81 to 98.24. According to the industry distribution chart, Wus Printed Circuit Co ranks #27 out of 2473 companies in the Hardware industry, placing it in the top 1.1%.
Is Wus Printed Circuit Co's EBITDA Margin % too high?
Wus Printed Circuit Co's current EBITDA Margin % of 73.02% is 267% above median its 10-year median of 19.87. Over the past 10 years, this metric has ranged from a low of 6.81 to a high of 98.24. The Hardware industry median EBITDA Margin % is 7.41. Wus Printed Circuit Co's value of 73.02% is 885.4% above this industry median. Based on the distribution chart, Wus Printed Circuit Co ranks #27 out of 2473 companies in the Hardware industry, which is in the top quartile — a strong position relative to peers. Overall, Wus Printed Circuit Co has a GF Score™ of 59/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Wus Printed Circuit Co's EBITDA Margin % compare to APH and GLW?
According to the Hardware industry distribution chart, Wus Printed Circuit Co ranks #27 out of 2473 companies for EBITDA Margin %. This places Wus Printed Circuit Co in the top 1% of its industry — outperforming the majority of peers. The industry median EBITDA Margin % is 7.41. Wus Printed Circuit Co's value of 73.02% is 885.4% above this benchmark. Historically, Wus Printed Circuit Co's own EBITDA Margin % has ranged from 6.81 to 98.24 over the past decade. While the company's 10-year median is 19.87 vs. the industry median of 7.41, Wus Printed Circuit Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for a Hardware company?
The median EBITDA Margin % among Hardware companies is 7.41, based on 2,473 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Wus Printed Circuit Co's current EBITDA Margin % of 73.02% is 885.4% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Wus Printed Circuit Co and its competitors. For the Hardware industry, the median EBITDA Margin % is 7.41 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Wus Printed Circuit Co's current EBITDA Margin % is 73.02%, which is 267% above median its own 10-year median of 19.87. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Wus Printed Circuit Co stock overvalued right now?
Based on GuruFocus' analysis, Wus Printed Circuit Co (TPE:2316) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$62.58, compared to a current price of NT$158.50 — trading 153.3% above its estimated fair value. The current EBITDA Margin % is 73.02%, which is 267% above median its 10-year median of 19.87 and 885.4% above the Hardware industry median of 7.41. Wus Printed Circuit Co's overall GF Score™ is 59/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Wus Printed Circuit Co (TPE:2316), the current EBITDA Margin % is 73.02% as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Wus Printed Circuit Co (TPE:2316) Overvalued in 2026?
Based on GuruFocus' analysis, Wus Printed Circuit Co stock appears to be overvalued.
The current stock price of NT$158.50 is trading 153.3% above its estimated GF Value™ of NT$62.58.
GuruFocus considers Wus Printed Circuit Co to be Significantly Overvalued.
Key valuation signals for TPE:2316:
EBITDA Margin %: 73.02% (267% above median its 10-year median of 19.87)
GF Value™: NT$62.58 vs. price of NT$158.50 (153.3% above fair value)
Industry Position: 885.4% above the Hardware median (#27 of 2473)
No single metric tells the full story. See the TPE:2316 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Wus Printed Circuit Co Ltd manufactures and sells printed circuit boards in Taiwan. It engaged in the manufacture, processing, assembly, and sales of double-sided and multi-layer printed circuit boards and imported commodity trading business. The company's reportable segments are Manufacturing and trading of printed circuit boards, which derive key revenue, Assembly and trading of PCB/ light products, Investment, and Others. Geographically, the company derives maximum revenue from Asia (excluding Taiwan), and the rest from North America, Taiwan, Europe, and other regions.
59GF Score
Get the complete analysis for TPE:2316
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:2316 has been successfully added to your 
