Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
G-Shank Enterprise CoTPE:2476 -3.56%77 EBITDA Margin % is 28.64% as of Dec. 2025, which is 43% above its 10-year median of 20.03. GuruFocus rates TPE:2476 with a GF Score™ of 77/100 and a GF Value™ of NT$83.98 (Significantly Overvalued). The stock has 7 warning signs investors should review. Among 3,031 Industrial Products companies, G-Shank Enterprise Co ranks better than 89.44% on this metric.
G-Shank Enterprise Co (TPE:2476) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
G-Shank Enterprise Co EBITDA Margin % Related Terms
G-Shank Enterprise Co EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for G-Shank Enterprise Co's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TPE:2476 vs GEV, ETN, PH: EBITDA Margin % Comparison
For the Specialty Industrial Machinery subindustry, G-Shank Enterprise Co's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
G-Shank Enterprise Co EBITDA Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, G-Shank Enterprise Co's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where G-Shank Enterprise Co's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
G-Shank Enterprise Co (TPE:2476) has a EBITDA Margin % of 28.64% as of Dec. 2025. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on G-Shank Enterprise Co and its competitors. This is 43% above median its historical median of 20.03. Over the past decade, G-Shank Enterprise Co's EBITDA Margin % has ranged from 15.34 to 28.67. According to the industry distribution chart, G-Shank Enterprise Co ranks #320 out of 3031 companies in the Industrial Products industry, placing it in the top 10.6%.
Is G-Shank Enterprise Co's EBITDA Margin % too high?
G-Shank Enterprise Co's current EBITDA Margin % of 28.64% is 43% above median its 10-year median of 20.03. Over the past 10 years, this metric has ranged from a low of 15.34 to a high of 28.67. The Industrial Products industry median EBITDA Margin % is 9.42. G-Shank Enterprise Co's value of 28.64% is 204% above this industry median. Based on the distribution chart, G-Shank Enterprise Co ranks #320 out of 3031 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, G-Shank Enterprise Co has a GF Score™ of 77/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does G-Shank Enterprise Co's EBITDA Margin % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, G-Shank Enterprise Co ranks #320 out of 3031 companies for EBITDA Margin %. This places G-Shank Enterprise Co in the top 11% of its industry — outperforming the majority of peers. The industry median EBITDA Margin % is 9.42. G-Shank Enterprise Co's value of 28.64% is 204% above this benchmark. Historically, G-Shank Enterprise Co's own EBITDA Margin % has ranged from 15.34 to 28.67 over the past decade. While the company's 10-year median is 20.03 vs. the industry median of 9.42, G-Shank Enterprise Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for an Industrial Products company?
The median EBITDA Margin % among Industrial Products companies is 9.42, based on 3,031 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. G-Shank Enterprise Co's current EBITDA Margin % of 28.64% is 204% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on G-Shank Enterprise Co and its competitors. For the Industrial Products industry, the median EBITDA Margin % is 9.42 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. G-Shank Enterprise Co's current EBITDA Margin % is 28.64%, which is 43% above median its own 10-year median of 20.03. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is G-Shank Enterprise Co stock overvalued right now?
Based on GuruFocus' analysis, G-Shank Enterprise Co (TPE:2476) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$83.98, compared to a current price of NT$122.00 — trading 45.3% above its estimated fair value. The current EBITDA Margin % is 28.64%, which is 43% above median its 10-year median of 20.03 and 204% above the Industrial Products industry median of 9.42. G-Shank Enterprise Co's overall GF Score™ is 77/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For G-Shank Enterprise Co (TPE:2476), the current EBITDA Margin % is 28.64% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is G-Shank Enterprise Co (TPE:2476) Overvalued in 2026?
Based on GuruFocus' analysis, G-Shank Enterprise Co stock appears to be overvalued.
The current stock price of NT$122.00 is trading 45.3% above its estimated GF Value™ of NT$83.98.
GuruFocus considers G-Shank Enterprise Co to be Significantly Overvalued.
Key valuation signals for TPE:2476:
EBITDA Margin %: 28.64% (43% above median its 10-year median of 20.03)
GF Value™: NT$83.98 vs. price of NT$122.00 (45.3% above fair value)
Industry Position: 204% above the Industrial Products median (#320 of 3031)
No single metric tells the full story. See the TPE:2476 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
G-Shank Enterprise Co Ltd is a Taiwan-based company that engages in the production of molds, stamping parts, fixtures and tools, automatic machines and electrical appliances, and mechanical components. Its products include Stepping motors, Spindle motors, Molds, punching items, Metal stamping tools, and Connectors. Its products are used in Automotive parts, Electronics components, Medical parts, Industrial parts, and others. The firm has two reporting departments: the stamping parts department and the general investment department. The firm generates key revenue from the stamping parts department, which is mainly engaged in the manufacturing and production, processing, and trading of stamping components. Geographically, the company generates key revenue from Taiwan.
77GF Score
Get the complete analysis for TPE:2476
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:2476 has been successfully added to your 
