Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
San Shing FastechTPE:5007 +0.89%88 EBITDA Margin % is 27.85% as of Dec. 2025, which is 29% above its 10-year median of 21.62. GuruFocus rates TPE:5007 with a GF Score™ of 88/100 and a GF Value™ of NT$49.80 (Modestly Overvalued). The stock has 3 warning signs investors should review. Among 3,031 Industrial Products companies, San Shing Fastech ranks better than 86.37% on this metric.
EBITDA Margin % is calculated as EBITDA divided by its Revenue. San Shing Fastech's EBITDA for the
three
months ended in Dec. 2025 was NT$423 Mil. San Shing Fastech's Revenue for the
three
months ended in Dec. 2025 was NT$1,518 Mil. Therefore, San Shing Fastech's EBITDA margin for the quarter that ended in Dec. 2025 was 27.85%.
San Shing Fastech (TPE:5007) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
San Shing Fastech EBITDA Margin % Related Terms
San Shing Fastech EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for San Shing Fastech's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TPE:5007 vs SNA, RBC, LECO: EBITDA Margin % Comparison
For the Tools & Accessories subindustry, San Shing Fastech's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
San Shing Fastech EBITDA Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, San Shing Fastech's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where San Shing Fastech's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
San Shing Fastech (TPE:5007) has a EBITDA Margin % of 27.85% as of Dec. 2025. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on San Shing Fastech and its competitors. This is 29% above median its historical median of 21.62. Over the past decade, San Shing Fastech's EBITDA Margin % has ranged from 19.75 to 24.05. According to the industry distribution chart, San Shing Fastech ranks #413 out of 3031 companies in the Industrial Products industry, placing it in the top 13.6%.
Is San Shing Fastech's EBITDA Margin % too high?
San Shing Fastech's current EBITDA Margin % of 27.85% is 29% above median its 10-year median of 21.62. Over the past 10 years, this metric has ranged from a low of 19.75 to a high of 24.05. The Industrial Products industry median EBITDA Margin % is 9.42. San Shing Fastech's value of 27.85% is 195.6% above this industry median. Based on the distribution chart, San Shing Fastech ranks #413 out of 3031 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, San Shing Fastech has a GF Score™ of 88/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does San Shing Fastech's EBITDA Margin % compare to SNA and RBC?
According to the Industrial Products industry distribution chart, San Shing Fastech ranks #413 out of 3031 companies for EBITDA Margin %. This places San Shing Fastech in the top 14% of its industry — outperforming the majority of peers. The industry median EBITDA Margin % is 9.42. San Shing Fastech's value of 27.85% is 195.6% above this benchmark. Historically, San Shing Fastech's own EBITDA Margin % has ranged from 19.75 to 24.05 over the past decade. While the company's 10-year median is 21.62 vs. the industry median of 9.42, San Shing Fastech has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for an Industrial Products company?
The median EBITDA Margin % among Industrial Products companies is 9.42, based on 3,031 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. San Shing Fastech's current EBITDA Margin % of 27.85% is 195.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on San Shing Fastech and its competitors. For the Industrial Products industry, the median EBITDA Margin % is 9.42 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. San Shing Fastech's current EBITDA Margin % is 27.85%, which is 29% above median its own 10-year median of 21.62. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is San Shing Fastech stock overvalued right now?
Based on GuruFocus' analysis, San Shing Fastech (TPE:5007) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$49.80, compared to a current price of NT$56.40 — trading 13.3% above its estimated fair value. The current EBITDA Margin % is 27.85%, which is 29% above median its 10-year median of 21.62 and 195.6% above the Industrial Products industry median of 9.42. San Shing Fastech's overall GF Score™ is 88/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For San Shing Fastech (TPE:5007), the current EBITDA Margin % is 27.85% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is San Shing Fastech (TPE:5007) Overvalued in 2026?
Based on GuruFocus' analysis, San Shing Fastech stock appears to be overvalued.
The current stock price of NT$56.40 is trading 13.3% above its estimated GF Value™ of NT$49.80.
GuruFocus considers San Shing Fastech to be Modestly Overvalued.
Key valuation signals for TPE:5007:
EBITDA Margin %: 27.85% (29% above median its 10-year median of 21.62)
GF Value™: NT$49.80 vs. price of NT$56.40 (13.3% above fair value)
Industry Position: 195.6% above the Industrial Products median (#413 of 3031)
No single metric tells the full story. See the TPE:5007 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
San Shing Fastech Corp is engaged in the manufacturing, processing, marketing, and export of bolts, nuts, steel wires, related machinery, machinery parts, and tools. Its products include nuts, bolts (screws), washers, wire, machinery, and tooling. The Company operates through the Fastener Segment, Machine / Tooling Segment, and Other Operation Segment. The Fastener Segment, which generates maximum revenue, focuses on manufacturing and marketing of bolts, nuts, and washers, processing of wires, and heat treatment. The Machine / Tooling Segment focuses on manufacturing and marketing of toolings and machines, while the Other Operation Segment focuses on marketing of wires, investments, and other financial income and expenditure activities.
88GF Score
Get the complete analysis for TPE:5007
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:5007 has been successfully added to your 
